Shop   |   Log In   |   Search    
Shop Site

Newsletter May 27th, 2011

Supertires now in stock

We have just received our initial shipment of the Super Tires / Super Wheels / Yellow Dogs product line of silicone and urethane tires.  As of this writing we don’t yet have everything on line, but the items are in stock and will be in our on-line catalog shortly.  You can see a chart of the complete specifications and applications of all the Super Tires and Yellow Dogs on our web site at:

http://www.electricdreams.com/super-tires-wheels-specs/

The product listings can be found at:

http://www.electricdreams.com/Shop/slot-car-parts-super-tires-c-3_1078.html

Super Tires are unique in the industry in offering a choice of tire diameters to fit many popular cars.  This lets you easily change the ride height of your car to increase or decrease magnetic downforce.  It also makes it easy to use some readily and inexpensively available factory replacement wheels for applications that require a larger or smaller tire diameter.

A look back

We have been publishing this newsletter for about 4 years now.  In that time we have added many new subscribers who may not be aware of what we have published in the past.  We thought it might be fun to offer here a sampling of the cars we have featured in the newsletter.  Enjoy!

Fly Lola T70 repaint — Jeff Deaton

Fly Ferrari 250GTO –Kevin Fleming, Slot Car Challenge 1

Fly Ferrari 250GTO –Kevin Fleming, Slot Car Challenge 1

Fly Ferrari 250 GTO, Brian Winters, Slot Car Challenge 1

67 Camaro — Revell snap body on Pioneer Mustang chassis, Electric Dream Team

TransAm Javelin — Revell snap body on Pioneer Mustang chassis, Electric Dream Team

Fly Ferrari GTO roadster — Electric Dream Team

Scalextric 69 Camaro repaint– Loors Svenson

65 Pontiac GTO — Vintage Aurora body on Scalextric NASCAR chassis

Scalextric 69 Camaro repaint, Brock Yates “Sunday Driver” car

67 Camaro kitbash — Revell snap body on Scalextric 69 Camaro chassis.

Scalextric 69 Camaro repaint

1973 Corvette — Scalextric L88 Corvette kitbash.

Scalextric L88 Corvette kitbash

Scalextric 1969 Mustang repaint

Scalextric 1969 Mustang repaint — This is not the Scalextric factory model, this is a repaint done before Scalextric’s car was produced.

Ninco Cobra heavily modified

Ghost Models Lola GT — Mike Morrow

Ninco 1 Mustang window conversion — Electric Dream Team

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone (310) 676-7600

Free shipping

Slot car technical information and advice: support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.  Next time you’re in the greater Los Angeles area stop by and see us at:

606 Hawaii Street, Unit B
El Segundo, CA 90245

We’re just minutes from LAX.

Fly Ferrari GTO Roadster

October 2, 2009 by  
Filed under Slot Car Tech News

Fly Ferrari GTO Roadster Final Report

It’s finished! It really is!

We would love to see this in 1:1 scale diving through the Corkscrew at Laguna Seca or powering up the hill toward start-finish at Road America. We can just imagine the Ferrari V12 wail amid all the rumbling Ford and Chevy V8s. We could imagine it at the Pebble Beach Concours with pride of place as the rarest and most desirable Ferrari of all time. That’s one of the truly cool things about the slot car hobby — you can build and race cars that never existed but should have.  We had so much fun creating this “phantom” car that we have even written a unique history for it. It isn’t true but it could have been. First, however, a recap of the project. We built this car to the Slot Car Challenge 1 rules, starting with a Fly E1801 250 GTO as specified. Here’s a list of the performance mods we did to it:

  • Fly B243 and B244 front and rear wheels and front tires. $13.98 for both. We retained the stock rear axle, bushings, and crown gear.
  • Indy Grips IG1308 tires on the rear.  $4.50.
  • Slot It SICH07 guide.  $5.99.  This guide, made for wood tracks, is actually too big for Scalextric track, but using it allowed us to trim the blade down to take maximum advantage of the Scalextric Sport slot’s full width and depth.
  • Scalextric W8475-2 traction magnet. $5.19.  As installed, the Scalextric magnet only delivers 264 grams of downforce vs. 352 for a stock Fly GTO with the original magnet.  The difference in downforce is due to the Scalextric magnet sitting higher in the chassis than the stock one. The advantage of the Scalextric magnet is that it provides downforce over more of the car’s width, making it more drivable.  The Scalextric magnet certainly could be moved lower to deliver comparable downforce, but it would require some carving on the chassis which we simply ran out of time to do.  Also, with the Scalextric magnet where it is the car is legal and very competitive for a local race series we can run it in, so we just decided to leave it as is.
  • Scale Auto SC006 motor. $14.79. We retained the GTO’s stock lead wires and drive shaft assembly.

Those parts, along with the $39.95 price of the car, bring the total cost to $84.40.  That wouldn’t have won the BFB prize, but the the car is great fun to drive. On our test track, with the same layout, power, and controllers as used on the official layout for Challenge 1, we got a 60 lap run out of the car and decided that was enough.  There is more development potential, especially if we lower the magnet, but it’s time to move on to other projects. Appearance-wise, the main thing we did, of course, was the coupe-to-roadster conversion.  This has been the most satisfying part of the project.  We are really pleased with the way it turned out and we think we have come very close to what a full-size GTO roadster would have looked like if Ferrari had ever built one.  But there’s much more to the car’s looks than just that.  We lowered the front of the body over the chassis to get the fenders snugged down over the smaller-diameter front wheels. On the stock GTO the body sits too high even for the original wheels and tires so as you can imagine the lowering we did was pretty radical.  As a result, we had to convert the interior tray extensively.  There was still room for a full-depth interior and driver figure but we would have had to rebuild the whole drive shaft tunnel, so to save time and keep things simple we just made the interior tub half-depth.  It really isn’t that noticeable on the finished car. Other appearance mods include:

  • Driver’s head replaced with a more period-correct one.
  • Roll bar structure fabricated from wire-filled plastic tubing.
  • Stock windshield cut down to a low windscreen.
  • Fire bottle from a Scalextric Corvette.
  • Shift lever and rear-view mirror from the junk box.
  • Decals from assorted sources, including some from all the way back to the 60s.

We painted the car with Tamiya X7 red acrylic and Testor Glosscote, wet-sanding with 600-grit sandpaper between coats.  We think the Tamiya red is just about the perfect shade for a Ferrari.  You can see how it compares with the color of a stock Fly GTO in the nose-to-nose photo below. Also, check out how much lower the front end of our roadster sits. We mentioned above that we wrote a history for the car.  Here it is, along with more photos.  We hope you enjoy reading it and looking at the photos.  We certainly enjoyed all the building, testing, photography, and writing that has gone into the entire project.

   

The Back Story
(Every good phantom model has one)
We all know the Ferrari factory never built a GTO roadster. When the GTO first appeared its critics, and they were many, called it a “Testa Rossa with a roof”. It was not, they said, a true GT car within the spirit of the rules, even if it did barely comply with the letter of them.  A GTO roadster would have lent too much credibility to that criticism.
That doesn’t mean that the Commendatore wouldn’t have liked to see one built, and thereby hangs a tale.
Toward the end of GTO production a few of them left the factory with 4-liter engines in place of the usual 3-liter unit, making them 330GTOs.  In 1965, after the GTO’s competition heyday was over, the factory had several tired examples, including a 330, gathering dust in the back of the competition department.  Remember that in those days old race cars were just that – old race cars.  The vintage racing movement was still far in the future.
In the Fall of 1965 Samantha Hill, whose company, Sam Hill Realty, had made her a fortune in the California real estate market, toured the Ferrari factory.  Ms. Hill was an enthusiastic, if only modestly talented, amateur sports car driver who had been racing an Austin-Healey in Cal Club races and had visions of competing in the upper production classes.  Somebody at Ferrari saw her coming and convinced her that one of the castoff GTOs, specifically the 330, would be the perfect vehicle for her introduction to the faster classes.   She wrote out a check on the spot.
In early December her racing shop, housed in a nondescript building on Sepulveda Boulevard, took delivery of the refurbished 330GTO.  She immediately filed an entry for an upcoming SCCA Regional at an airport course in Arizona.
Her first unpleasant surprise came when the SCCA officials classified Samantha and her GTO into the modified class instead of one of the production classes. Instead of racing with Corvettes and Cobras as she expected she found herself on the track with Lola T70s, McLarens, and other mid-V8-engined rocketships.  The next came in the first practice session.  The factory rebuild apparently did not include much of anything in the way of proper suspension setup.  Samantha headed for the pits after only three laps, wide-eyed with fright at the car’s diabolical handling and big-engined modified cars blasting by her at enormous speed differentials.
Samantha’s mechanic, Stanley Spanner, spent the whole weekend trying to find the problem without success.  Then, in Sunday afternoon’s race the GTO snapped into a lurid slide beyond Samantha’s ability to get out of and ended up upside down in the weeds.  The factory roll bar was little more use than the aluminum top itself, and Samantha emerged from the wreck with a concussion and a newfound appreciation for life that prompted her to end her driving career right then and there.  She was still a sports car enthusiast, though, and soon moved on to Group 7 cars, hired drivers, and the USRRC.  The GTO, its top utterly flattened but otherwise only lightly damaged, sat ignored under a tarp in the back of the building.  Then one day in March of 1966 Bonham Neville walked into the Sam Hill Racing shop.
Bon, as he was known, was a natural-born automotive genius.  He spent his high school years and several thereafter building an increasingly wild assortment of coupes, roadsters, rail dragsters, and other creations that defied classification and racing them on California’s drag strips and dry lakes.  By 1959, at age 22, he was already something of a hot rodding legend and had a thriving car-building business.  That year a customer wanted to convert his Corvette from a drag racer to an SCCA road racer and invited Bon to a race at Riverside to check out the sports car scene.  One look at sports cars and Bon was hooked.  He jumped in with both feet and soon was racing a Corvette against Dick Guldstrand, Bob Bondurant, Andy Porterfield, Skip Hudson, Tony Settember, Dave McDonald, and Paul Rinehart, among many others who populated the huge big-bore production car grids of the era.  Bon won frequently and his business prospered greatly.
By the mid-60s production car racing had changed radically with ever-larger engines being stuffed into the cars.  Neville, gradually turning into an advocate of light, nimble cars, was becoming profoundly dissatisfied with his big-block Corvette.  Some say he was the one who coined the term “plastic pachyderm” to describe what he considered the  Corvette’s brute-force approach to battling the Cobras.  He had even less liking for the 427 Cobra, which he had driven and freely denounced as handling like a pig, much to Carroll Shelby’s displeasure.  He was looking for an outside-the-box alternative when he visited Samantha Hill’s shop that day to drop by some parts he had fabricated for her new Lola.
“What’s that?” he asked when he saw the canvas-shrouded shape in a dusty corner.
“Oh, that.” Spanner answered, “That’s Samantha’s old Ferrari.”
“Mind if I look?” Bon asked.
“Help yourself.”
Bon Neville spent the rest of the afternoon minutely examining the damaged GTO and asking questions.  It didn’t take him long to spot the reason for the car’s terrible handling.  Both the Ferrari factory mechanics and Spanner had failed to spot a frame tube in a critical but easy to miss location that had completely broken at one end, allowing the rear suspension to do bizarrely unpredictable things.¬†He also noted that with the exception of the crushed top the body would be easy for his fabricators to repair.  Wheels began to turn in his head.  He said nothing about the broken tube.  When Samantha came into the shop he pointed to the GTO and said, “How much?”  Samantha, thoroughly disgusted with the car ever since that race weekend in Arizona, named a figure.  Bon couldn’t believe his ears.
Bon was, among many things, an avid reader of rulebooks. Two he had studied thoroughly were the SCCA General Competition Rules and Production Car Specifications and the FIA GT Class Rules.  At the time they were still at least tenuously connected.  The GTO was homologated with the FIA as a variant of a Ferrari production road car.  That allowed it into FIA GT racing even though nowhere near enough GTOs had been built to satisfy the minimum production requirement.  Those same Ferrari road cars were recognized by the SCCA for production car racing.  Some were even being raced. They were almost, but not quite, fast enough to stay with the Corvettes and Cobras.  The GTO, Bon realized, was a big step up in performance.  If he could get it ruled legal for production class racing and develop it to the limit of the SCCA rules the possibilities were truly delicious.
Bon spent several weeks writing and rewriting a formal petition to the SCCA Competition Board.  When he had it honed to perfection he sent it off.  The petition, surprisingly, generated little debate among the Comp Board members, who did not see in the nearly obsolete GTO quite the same potential Bon did but did see the possible advantages of bringing Ferraris into the production class wars as something a bit more than spear carriers.  They sent Bon a letter informing him that his petition was approved.  He had his outside-the-box alternative.
Bon called Samantha, accepting her offer on the GTO.  The next day he had the car in his shop, a few miles down Sepulveda from Samantha’s.  He totally disassembled it and began putting it back together his way.  The engine went to Traco Engineering to have that firm’s legendary magic worked on it.  The frame was not only repaired but lightened wherever possible and stiffened and reinforced as needed.  The chassis rebuild included a very stout and liberally braced roll bar that not only exceeded SCCA specs but also increased chassis stiffness by a very respectable percentage.  All the body damage got fixed except the flattened roof.
Bon had sent a letter to the factory describing his plans for the GTO and inquiring about the availability of spare body parts, in particular a new roof.  Weeks went by with no reply while the rest of the project forged ahead.  Then one day a large, thick envelope with a Maranello return address arrived.  Inside was a letter.
“Dear Mr. Neville,” it began, “I regret to inform you that the GTO body parts about which you inquired are no longer available.  However, I heartily approve of your project and want to help you.  I believe you will find the enclosed documents useful in pursuing your goal.  I wish you every success in defeating the Cobras. Please be assured of my continuing interest and warmest regards.”
It was personally signed by Enzo Ferrari.
The “documents” accompanying the letter turned out to be a set of beautifully rendered engineering drawings, specifications, and manufacturing instructions for a complete GTO roadster rear clip, dated 1962. They also included a copy of a letter from the FIA confirming that the projected though unbuilt roadster was covered under the GTO’s FIA homologation.
When Bon hauled the completed car to Willow Springs for its first test it was 300 pounds lighter, 50 percent stiffer, and had 30 percent more power plus a torque curve much better suited to the shorter, tighter American race circuits where it would be competing.  The roadster body, with the low Plexiglas windshield Bon made for it, reduced drag substantially and made the rear “duck tail” spoiler more effective.  The chassis sat much lower to the track on American Racing Equipment 5-spoke magnesium wheels fitted with the widest, lowest-profile Goodyear tires the rules would allow.   The first day it ran below the A-production lap record and revealed only a few small problems to correct.
Two weeks later Bon entered a National at Riverside.  Even with more power and better aerodynamics he was losing ground on the long back straight to the big-block cars but he still beat all but two of them.  The following weekend he towed north to Laguna Seca, where the car was in its element.  Bon pulled out to a 20-second lead over a 40-car field and then cruised to the victory.  The rest of the season went the same way.  Wherever the Corvettes and Cobras had enough of a straightaway to use all their Detroit horsepower the GTO was at best a top-five car.  Everywhere else it killed them.
The American Road Race of Champions, or ARRC for short, posed a problem, however.  At the time the event alternated between Riverside and Daytona, both of them horsepower tracks.  In 1966 at Riverside Bon qualified sixth and finished fourth.  In 1967 at Daytona he qualified only eleventh and finished seventh.  On the infield portion of the course he could easily pass any car in the field but as soon as he reached the flat-out oval section the bigblocks blew right by him.
 
Bon had also discovered another problem.  The Corvettes, with their fiberglass bodies, were a lot better at handling body contact than the Ferrari was, especially those with the bumper brackets left in place, reinforcing both ends of the car.  As long as Bon could get clear of the field and away into the lead he was fine, but back in the pack it could be brutal, especially since some of the Corvette drivers were not squeamish about using their weight and durability to maximum advantage.  On the first lap at the 1968 ARRC he was hit from behind and then from the side.  The other cars, both Corvettes, continued on but the Ferrari needed major repairs.
In 1969 Bon went TransAm racing with a Camaro and had no time to race the Ferrari.  Over the course of the year his shop rebuilt it with further upgrades and detail modifications, including the Minilite wheels it wears to this day, but the car saw no action.  At the end of the season Bon decided he didn’t like all the travel required to compete in a pro series.  He decided to go back to SCCA National racing and just run on the West Coast.  When the SCCA announced that it would hold the 1970 ARRC at Road Atlanta, where Bon thought the GTO had a real chance to win, he had an idea.  He decided to try to qualify for an ARRC invitation in both A-production and A-sedan, even though the two classes always ran in the same race group everywhere but the ARRC.
He carefully studied the 1970 schedule, calculating where the GTO would be most competitive in its class and where he stood the best chance of a good points day in A-sedan with the Camaro.  He entered and qualified both cars in each race.  That paid off on a couple of occasions when the car he intended to race that weekend broke in practice or qualifying and he was able to drive the other one and add to its point total.   At the end of the season he had his two ARRC invitations.
At Atlanta Bon set the fastest A-production times right from the beginning of practice, much to the chagrin of the assembled Corvette racers.  The Gulf Oil Company, seeing the possibility of an epic upset, signed on as Bon’s sponsor for the weekend.
Knowing the Ferrari’s susceptibility to body contact the Corvette contingent began playing head games with Bon.  One of the Corvette drivers known for his aggressive driving appeared at the track in a t-shirt with “Designated Hitter” printed on the front and back.  Throughout the days leading up to the A-production race Bon kept hearing subtle comments intended to unnerve him, but he simply wasn’t having any of it.  He sent shock waves through the paddock when he qualified the GTO on the A-production pole, setting a new class lap record.  He knew the start would decide everything.  He and his crew spent hours trying to determine what speed, gear, and RPM would give him the best jump at the start.
In the A-sedan race he finished second in the Camaro after a race-long battle in which he swapped the lead several times with the eventual winner.  He went straight from the A-sedan podium to the A-production grid, determined to make a perfect start.  He led the field to the green at exactly the speed and RPM he had decided on.  At the drop of the flag he nailed the throttle.  He got a huge break when the other front-row driver, in a Corvette, got wheelspin and fell back.  Bon led into turn one and just kept extending his lead.
But on the last lap, with 15 seconds on the field, he felt something go terribly wrong at the back of the car, nearly causing him to crash.  The GTO was suddenly almost undrivable.  He nursed it around to the checkered flag, but half a dozen cars caught and passed him before he got there.  It turned out to be a broken part in the rear suspension.  It was one of the few rear suspension parts not replaced after the 1968 crash.
That winter Bon bought a Formula 5000 car and took both it and the Camaro to the ARRC in 1971.  He went back to what became known as the Runoffs many times, but never again with the Ferrari, though he continued to race it and even win with it every once in a while, especially after the SCCA dropped it down to B-production.
Unlike most racers, Bon Neville has kept many of the race cars he ran back in the day, including the Ferrari.  He is still active and highly revered in vintage racing where he regularly exercises his favorite race car of them all, the world’s only Ferrari GTO roadster.  He maintains it exactly as it looked on the day of its last B-production victory except for a set of big Gulf decals to commemorate his near-triumph at the 1970 ARRC.  He often receives multi-million-dollar offers for the car, but he always replies that it’s not for sale at any price. And when he drives it he wears an old-style open-face helmet so everybody can see the big, wide grin on his face.
If you have any questions or comments on this article please e-mail them to support@electricdreams.com.

Building the Fly Ferrari GTO Roadster

September 7, 2009 by  
Filed under Slot Car Tech News

Fly Ferrari GTO Roadster Final Report (Sep. 4, 2009)

It’s finished! It really is!

We would love to see this in 1:1 scale diving through the Corkscrew at Laguna Seca or powering up the hill toward start-finish at Road America. We can just imagine the Ferrari V12 wail amid all the rumbling Ford and Chevy V8s. We could imagine it at the Pebble Beach Concours with pride of place as the rarest and most desirable Ferrari of all time. That’s one of the truly cool things about the slot car hobby — you can build and race cars that never existed but should have. We had so much fun creating this “phantom” car that we have even written a unique history for it. It isn’t true but it could have been.

First, however, a recap of the project. We built this car to the Slot Car Challenge 1 rules, starting with a Fly E1801 250 GTO as specified. Here’s a list of the performance mods we did to it:

  • Fly B243 and B244 front and rear wheels and front tires.$13.98 for both. We retained the stock rear axle, bushings, and crown gear.
  • Indy Grips IG1308 tires on the rear. $4.50.
  • Slot It SICH07 guide. $5.99. This guide, made for wood tracks, is actually too big for Scalextric track, but using it allowed us to trim the blade down to take maximum advantage of the Scalextric Sport slot’s full width and depth.
  • Scalextric W8475-2 traction magnet. $5.19. As installed, the Scalextric magnet only delivers 264 grams of downforce vs. 352 for a stock Fly GTO wit the original magnet. The difference in downforce is due to the Scalextric magnet sitting higher in the chassisthan the stock one. The advantage of the Scalextric magnet is that it provides downforce over more of the car’s width, making it more drivable. The Scalextric magnet certainly could be moved lower to deliver comparable downforce, but it would require some carving on the chassis which we simply ran out of time to do. Also, with the Scalextric magnet where it is the car is legal and very competitive for a local race series we can run it in, so we just decided to leave it as is.
  • Scale Auto SC006 motor.$14.79.We retained the GTO’s stock lead wires and drive shaft assembly.

Those parts, along with the$39.95 priceof the car, bring the total cost to $84.40. That wouldn’t have won the BFB prize, but the the car is great fun to drive.

On our test track, with the same layout, power, and controllers as used on the official layout for Challenge 1, we got a 60 lap run out of the car and decided that was enough. There is more development potential, especially if we lower the magnet, but it’s time to move on to other projects.

Appearance-wise, the main thing we did, of course, was the coupe-to-roadster conversion. This has been the most satisfying part of the project. We are really pleased with the way it turned out and we think we have come very close to what a full-size GTO roadster would have looked like if Ferrari had ever built one. But there’s much more to the car’s looks than just that. We lowered the front of body over the chassis to get the fenders snugged down over the smaller-diameter front wheels. On the stock GTO the body sits too high even for the original wheels and tires, so as you can imagine, the lowering we did was pretty radical. As a result, we had to convert the interior tray extensively. There was still room for a full-depth interior and driver figure but we would have had to rebuild the whole drive shaft tunnel,so to save time and keep things simplewejust made the interior tub half-depth. It really isn’t that noticeable on the finished car.

Other appearance mods include:

  • Driver’s head replaced with a more period-correct one.
  • Rollbar structurefabricated from wire-filled plastic tubing.
  • Stock windshield cut down to a low windscreen.
  • Fire bottle from Scalextric Corvette.
  • Shift lever and rear-view mirror from the junk box.
  • Decals from assorted sources, including some from all the way back to the 60s.

We painted the car with Tamiya X7 red acrylic and Testor Glosscote, wet-sanding with 600-grit sandpaper between coats. We think the Tamiya red is just about the perfect shade for a Ferrari. You can see how it compares with the color of a stock Fly GTO in the nose-to-nose photo below. Also, check out how much lower the front end of our roadster sits.

We mentioned above that we wrote a history for the car. Here it is, along with more photos. We hope you enjoy reading it and looking at the photos. We certainly enjoyed all the building, testing, photography, and writing that has gone into the entire project.

The Back Story
(Every good phantom model has one)
We all know the Ferrari factory never built a GTO roadster.When the GTO first appeared its critics, and they were many, called it a “Testa Rossa with a roof”.It was not, they said, a true GT car within the spirit of the rules, even if it did barely comply with the letter of them.A GTO roadster would have lent too much credibility to that criticism.
That doesn’t mean that the Commendatore wouldn’t have liked to see one built, and thereby hangs a tale.
Toward the end of GTO production a few of them left the factory with 4-liter engines in place of the usual 3-liter unit, making them 330GTOs. In 1965, after the GTO’s competition heyday was over, the factory had several tired examples, including a 330, gathering dust in the back of the competition department.Remember that in those days old race cars were just that ‚Äö√Ñ√¨ old race cars.The vintage racing movement was still far in the future.
In the Fall of 1965 Samantha Hill, whose company, Sam Hill Realty, had made her a fortune in the California real estate market, toured the Ferrari factory.Ms. Hill was an enthusiastic, if only modestly talented, amateur sports car driver who had been racing an Austin-Healey in Cal Club races and had visions of competing in the upper production classes.Somebody at Ferrari saw her coming and convinced her that one of the castoff GTOs, specifically the 330, would be the perfect vehicle for her introduction to the faster classes. She wrote out a check on the spot.

In early December her racing shop, housed in a nondescript building on Sepulveda Boulevard, took delivery of the refurbished 330GTO.She immediately filed an entry for an upcoming SCCA Regional at an airport course in Arizona.

Her first unpleasant surprise came when the SCCA officials classified Samantha and her GTO into the modified class instead of one of the production classes.Instead of racing with Corvettes and Cobras as she expected she found herself on the track with Lola T70s, McLarens, and other mid-V8-engined rocketships.The next came in the first practice session.The factory rebuild apparently did not include much of anything in the way of proper suspension setup.Samantha headed for the pits after only three laps, wide-eyed with fright at the car’s diabolical handling and big-engined modified cars blasting by her at enormous speed differentials.
Samantha’s mechanic, Stanley Spanner, spent the whole weekend trying to find the problem without success.Then, in Sunday afternoon’s race the GTO snapped into a lurid slide beyond Samantha’s ability to get out of and ended up upside down in the weeds.The factory roll bar was little more use than the aluminum top itself, and Samantha emerged from the wreck with a concussion and a newfound appreciation for life that prompted her to end her driving career right then and there.She was still a sports car enthusiast, though, and soon moved on to Group 7 cars, hired drivers, and the USRRC.The GTO, its top utterly flattened but otherwise only lightly damaged, sat ignored under a tarp in the back of the building.Then one day in March of 1966 Bonham Neville walked into the Sam Hill Racing shop.
Bon, as he was known, was a natural-born automotive genius.He spent his high school years and several thereafter building and racing an increasingly wild assortment of coupes, roadsters, rail dragsters, and other creations that defied classification on California’s drag strips and dry lakes.By 1959, at age 22, he was already something of a hot rodding legend and had a thriving car-building business.That year a customer wanted to convert his Corvette from a drag racer to an SCCA road racer and invited Bon to a race at Riverside to check out the sports car scene. One look at sports cars and Bon was hooked.He jumped in with both feet and soon was racing a Corvette against Dick Guldstrand, Bob Bondurant, Andy Porterfield, Skip Hudson, Tony Settember, Dave McDonald, and Paul Rinehart, among many others who populated the huge big-bore production car grids of the era.Bon won frequently and his business prospered greatly.
By the mid-60s production car racing had changed radically with ever-larger engines being stuffed into the cars.Neville, gradually turning into an advocate of light, nimble cars, was becoming profoundly dissatisfied with his big-block Corvette.Some say he was the one who coined the term “plastic pachyderm” to describe what he considered theCorvette’s brute-force approach to battling the Cobras.He had even less liking for the 427 Cobra, which he had driven and freely denounced as handling like a pig, much to Carroll Shelby’s displeasure. He was looking for an outside-the-box alternative when he visited Samantha Hill’s shop that day to drop by some parts he had fabricated for her new Lola.
“What’s that?” he asked when he saw the canvas-shrouded shape in a dusty corner.
“Oh, that.” Spanner answered, “That’s Samantha’s old Ferrari.”
“Mind if I look?” Bon asked.
“Help yourself.”
Bon Neville spent the rest of the afternoon minutely examining the damaged GTO and asking questions.It didn’t take him long to spot the reason for the car’s terrible handling.Both the Ferrari factory mechanics and Spanner had failed to spot a frame tube in a critical but easy to miss location that had completely broken at one end, allowing the rear suspension to do bizarrely unpredictable things.He also noted that with the exception of the crushed top the body would be easy for his fabricators to repair.Wheels began to turn in his head. He said nothing about the broken tube.When Samantha came into the shop he pointed to the GTO and said, “How much?”Samantha, thoroughly disgusted with the car ever since that race weekend in Arizona, named a figure.Bon couldn’t believe his ears.
Bon was, among many things, an avid reader of rulebooks. Two he had studied thoroughly were the SCCA General Competition Rules and Production Car Specifications and the FIA GT Class Rules.At the time they were still at least tenuously connected.The GTO was homologated with the FIA as a variant of a Ferrari production road car.That allowed it into FIA GT racing even though nowhere near enough GTOs had been built to satisfy the minimum production requirement.Those same Ferrari road cars were recognized by the SCCA for production car racing.Some were even being raced.They were almost, but not quite, fast enough to stay with the Corvettes and Cobras.The GTO, Bon realized, was a big step up in performance.If he could get it ruled legal for production class racing and develop it to the limit of the SCCA rules the possibilities were truly delicious.
Bon spent several weeks writing and rewriting a formal petition to the SCCA Competition Board.When he had it honed to perfection he sent it off.The petition, surprisingly, generated little debate among the Comp Board members, who did not see in the nearly obsolete GTO quite the same potential Bon did but did see the possible advantages of bringing Ferraris into the production class wars as something a bit more than spear carriers.They sent Bon a letter informing him that his petition was approved.He had his outside-the-box alternative.
Bon called Samantha, accepting her offer on the GTO.The next day he had the car in his shop, a few miles down Sepulveda from Samantha’s.He totally disassembled it and began putting it back together his way.The engine went to Traco Engineering to have that firm’s legendary magic worked on it.The frame was not only repaired but lightened wherever possible and stiffened and reinforced as needed.The chassis rebuild included a very stout and liberally braced roll bar that not only exceeded SCCA specs but also increased chassis stiffness by a very respectable percentage.All the body damage got fixed except the flattened roof.
Bon had sent a letter to the factory describing his plans for the GTO and inquiring about the availability of spare body parts, in particular a new roof.Weeks went by with no reply while the rest of the project forged ahead.Then one day a large, thick envelope with a Maranello return address arrived.Inside was a letter.
“Dear Mr. Neville,” it began, “I regret to inform you that the GTO body parts about which you inquired are no longer available.However, I heartily approve of your project and want to help you.I believe you will find the enclosed documents useful in pursuing your goal.I wish you every success in defeating the Cobras. Please be assured of my continuing interest and warmest regards.”
It was personally signed by Enzo Ferrari.

The “documents” accompanying the letter turned out to be a set of beautifully rendered engineering drawings, specifications, and manufacturing instructions for a complete GTO roadster rear clip, dated 1962. They also included a copy of a letter from the FIA confirming that the projected though unbuilt roadster was covered under the GTO’s FIA homologation.

When Bon hauled the completed car to Willow Springs for its first test it was 300 pounds lighter, 50 percent stiffer, and had 30 percent more power plus a torque curve much better suited to the shorter, tighter American race circuits where it would be competing.The roadster body, with the low Plexiglas windshield Bon made for it, reduced drag substantially and made the rear “duck tail” spoiler more effective.The chassis sat much lower to the track on American Racing Equipment 5-spoke magnesium wheels fitted with the widest, lowest-profile Goodyear tires the rules would allow. The first day it ran below the A-production lap record and revealed only a few small problems to correct.
Two weeks later Bon entered a National at Riverside. Even with more power and better aerodynamics he was losing ground on the long back straight to the big-block cars but he still beat all but two of them. The following weekend he towed north to Laguna Seca, where the car was in its element.Bon pulled out to a 20-second lead over a 40-car field and then cruised to the victory. The rest of the season went the same way.Wherever the Corvettes and Cobras had enough of a straightaway to use all their Detroit horsepower the GTO was at best a top-five car.Everywhere else it killed them.
The American Road Race of Champions, or ARRC for short, posed a problem, however.At the time the event alternated between Riverside and Daytona, both of them horsepower tracks. In 1966 at Riverside Bon qualified sixth and finished fourth.In 1967 at Daytona he qualified only eleventh and finished seventh.On the infield portion of the course he could easily pass any car in the field but as soon as he reached the flat-out oval section the bigblocks blew right by him.

Bon had also discovered another problem.The Corvettes, with their fiberglass bodies, were a lot better at handling body contact than the Ferrari was, especially those with the bumper brackets left in place, further reinforcing both ends of the car.As long as Bon could get clear of the field and away into the lead he was fine, but back in the pack it could be brutal, especially since some of the Corvette drivers were not squeamish about using their weight and durability to maximum advantage.On the first lap at the 1968 ARRC he was hit from behind and then from the side.The other cars, both Corvettes, continued on but the Ferrari needed major repairs.

In 1969 Bon went TransAm racing with a Camaro and had no time to race the Ferrari.Over the course of the year his shop rebuilt it with further upgrades and detail modifications, including the Minilite wheels it wears to this day, but the car saw no action.At the end of the season Bon decided he didn’t like all the travel required to compete in a pro series.He decided to go back to SCCA National racing and just run on the West Coast.When the SCCA announced that it would hold the 1970 ARRC at Road Atlanta, where Bon thought the GTO had a real chance to win, he had an idea.He decided to try to qualify for an ARRC invitation in both A-production and A-sedan, even though the two classes always ran in the same race group everywhere but the ARRC.
He carefully studied the 1970 schedule, calculating where the GTO would be most competitive in its class and where he stood the best chance of a good points day in A-sedan with the Camaro.He entered and qualified both cars in each race.That paid off on a couple of occasions when the car he intended to race that weekend broke in practice or qualifying and he was able to drive the other one and add to its point total. At the end of the season he had his two ARRC invitations.
At Atlanta Bon set the fastest A-production times right from the beginning of practice, much to the chagrin of the assembled Corvette racers. The Gulf Oil Company, seeing the possibility of an epic upset, signed on as Bon’s sponsor for the weekend.
Knowing the Ferrari’s susceptibility to body contact the Corvette contingent began playing head games with Bon.One of the Corvette drivers known for his aggressive driving appeared at the track in a t-shirt with “Designated Hitter” printed on the front and back.Throughout the days leading up to the A-production race Bon kept hearing subtle comments intended to unnerve him, but he simply wasn’t having any of it.He sent shock waves through the paddock when he qualified the GTO on the A-production pole, setting a new class lap record.He knew the start would decide everything.He and his crew spent hours trying to determine what speed, gear, and RPM would give him the best jump at the start.
In the A-sedan race he finished second in the Camaro after a race-long battle in which he swapped the lead several times with the eventual winner.He went straight from the A-sedan podium to the A-production grid, determined to make a perfect start.He led the field to the green at exactly the speed and RPM he had decided on.At the drop of the flag he nailed the throttle.He got a huge break when the other front-row driver, in a Corvette, got wheelspin and fell back.Bon led into turn one and just kept extending his lead.

But on the last lap, with 15 seconds on the field, he felt something go terribly wrong at the back of the car, nearly causing him to crash.The GTO was suddenly almost undrivable.He nursed it around to the checkered flag, but half a dozen cars caught and passed him before he got there.It turned out to be a broken part in the rear suspension.He suspects to this day that the failure was the legacy of a seemingly minor shunt with a Corvette earlier in the season.

That winter Bon bought a Formula 5000 car and took both it and the Camaro to the ARRC in 1971.He went back to what became known as the Runoffs many times, but never again with the Ferrari, though he continued to race it and even win with it every once in a while, especially after the SCCA dropped it down to B-production.

Unlike most racers, Bon Neville has kept many of the race cars he ran back in the day, including the Ferrari.He is still active and highly revered in vintage racing where he regularly exercises his favorite race car of them all, the world’s only Ferrari GTO roadster.He maintains it exactly as it looked on the day of its last B-production victory except for a set of big Gulf decals to commemorate his near-triumph at the 1970 ARRC.He often receives multi-million-dollar offers for the car, but he always replies that it’s not for sale at any price. And when he drives it he wears an old-style open-face helmet so everybody can see the big, wide grin on his face.

Fly Ferrari 250 GTO Roadster Update (Aug. 14, 2009)

Well, we didn’t get as far with the project this weekas we thought we would. The car is together and running and has been undergoing extensive track testing and development but it’s still not finished. Here’s what we’ve done so far.

Chassis and running gear — We replaced the stock wheels and tires by installing front an rear axle assemblies from a Fly Porsche 911. This got us muchwider tires front and rear and a significantly smaller tire diameter in front.. We replaced the rear tires with a pair of Indy Grips 1308 silicones for improved grip. We also replaced the stock guide with a Slot It SICH07 deep slot guide. This guide had to be trimmed forthe slots on our Scalextric track, but by starting with an oversize guide we were able to shape it to take maximum advantage of the available slot width and depth.

We replaced the stock magnet with astandard Scalextric bar magnet. The stock magnet was actually too low and bogged the car on the straights. The Scalextric magnet sits a little higher and seems to deliver all the cornering grip needed without any significant penalty in straightline speed. In addition, it provides magnetic downforce over more of the car’s width, and that helps drivability. So far we have not tested the car with an alternate motor or gears, though those options will be explored before we determine the car’s final specifications.

Body and interior — The coupe-to-roadster conversion presented no unusual problems. We simply cut off the top and filled in the rear deck with sheet styrene and body putty. You can see the results in the photos. The styrene strip structures on the bottom of the new rear deck are retainers to keep the rear axle assembly in place.

What did offer some problems was lowering the body over the chassis. Looking at the photo of our roadster nose-to-nose with a stock GTO you can see how much lower the roadster’s body rides, especially in the front. In order to get the wheel openings snugged down over the new wheels and tires we had to lower the body over the chassis. That, in turn, caused problems with the full-depth interior. It was not hard to trim the interior to clear the chassis; the problem was with the drive shaft assembly. We would have had to reconstruct the entire transmission tunnel to clear it. Finally we just decided to cut off the whole interior tub at a bit less than half depth, which solved the problem neatly. We still had to provide a little extra clearance along the centerline, but that was easy to do with sheet plastic strip. The bottom of the interior retains the drive shaft bushing in its mount.

One nice thing about the Fly full-length drivers is that they separate at the waist, makingthem easy to convert to half-figures. Ours needed a little additional trimming of the bottom of the torso to sit at the right angle. We also beheaded the poor, carved-up fellow and replaced his head with a smaller one wearing a more period-correct helmet. Our research had indicated that the size, as well as the helmet style,of the original head simply was not to scale, since none of the current F-1 drivers were even born back in the sixties, much less racing in sports cars. We also cut the windshield down into a low racing windscreen. This is something that requires special care, since clear plastic tends to be more brittle than colored plastic. We cracked our cut-down windshield in the trimming process but we will cover the crack with a few decals simulating tech stickers.

Our goal withthe phantom GTO roadsteris to model it as it might have looked in the late 60s if some SCCA racer had bought an old, worn-out factory race car and rebuilt it for SCCA production class racing. To that end we deleted details that would not have been required under the SCCA rules, such as parking lights, door handles, turn signals, and the like. We also eliminated the photo-etched bits on the hood, not so much for aesthetic reasons as because we have seen at least two cut fingers from them. We don’t want the turn marshals to be afraid to pick up our car.

Still to come: A roll bar, additional details, more on-track developmnent testing, and final painting and assembly. More info and photos in the next newsletter.

Just for fun… (Aug. 7, 2009)

The response to the photos of all the entries in Slot Car Challenge 1 has been great. It got usthinking about what kind of car we would build if we could enter our own contest. We decided to build a car incorporating the best ideas of all the entries plus a few wrinkles of our own. The car isn’t finished yet, but here’s a first look at theproject in progress.

Yep, we just had to see what a Ferrari GTO would look like as a roadster. As far as we know Ferrari never built a GTO roadster but they could have. The rules at the time allowed for alternate bodywork on an existing chassis. In fact, that was the rule under which all the GTOs were built and homologated for FIA competition. Carroll Shelby took advantage of the same rule to enter his GT championship and LeMans class-winning Cobra Daytona Coupes. If Shelby could rebody a roadster as a coupe, then Ferrari could have turned a coupe into a roadster. We’re working hard to finish the car and get it track tested before next week’s newsletter. We’ll have a full report on what we did to it and how it compared on the track with the contest entries.

1/32 Slot Cars, 1/24 Slot Cars, Vintage Slot Cars, Slot Car Track Sets, Slot Car Accessories and much more!

Slot Cars by Brand: | Scalextric | Pioneer | 1/32 Carrera | 1/24 Carrera | Cartrix | Fly |Revell |
| Ninco | MMK | Proto Slot Kit | NSR | Racer | SCX |1/32 Auto Art | 1/24 Auto Art |
| Sloter | TSRF | Spirit | Dreamslot by Ostorero | Pink Kar | Slot.it |

Vintage Slot Cars by Brand: | AMT | Atlas | Cox | K&B Vintage | Vintage Monogram | MPC |
| MRRC | Vintage Pactra Competition | RehCo | Vintage Revell | Russkit | Vintage Scalextric |
| Strombecker | Testor | Unique |

Slot Car Accessories & More: Parma Slot Car Accessories | Slot Car Race Sets | Slot Car Track and Accessories | Slot Car Power Supplies | Slot Car Controllers |
| Slot Car Kits | Vintage Slot Car Parts | Slot Car Tools | Slot Car Supplies | Slot Car News | Slot Car Reviews | Slot Car Tech Help | Vintage Slot Car News |
| Slot Car Racing | Slot Car Newsletter Archive |