We will be open Saturday December 23rd and Sunday 24th from 10am to 2pm.

Shop   |   Log In   |   Search    
Shop Site

Newsletter November 30th, 2017

December 3, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

You can race one of the fastest and most highly-detailed 1/32 scale Slot.it cars that is available at a very special price for one week. No dealers, One to a customer.

 

Slot It SICA13C Jaguar XJR12, #35, LeMans 1991.

Motor: FC130.

Easy, low-cost performance increase for Slot It GTP/Gp. C cars racing with magnets on plastic track…

Install SIPT06 19x10mm silicone slicks (a pair of these comes as extra tires with most of these cars) and an SICN07 racing magnet. The tires slip onto the rear wheels and the magnet snaps into the chassis in place of the original magnet. These two simple changes make a huge difference in the handling of the car and produce much faster lap times.

Need more grip? Try these aftermarket tires! Supertires 1400, 1401, 1402. 1403, 1404, 1405

The Jaguar XJR12 is a sport-prototype racing car, born in 1990 to replace the XJR9.

This full-size car featured a carbon fiber monocoque chassis. The engine was a V12 engine with two valves per cylinder. In 1990, displacement was 6 liters for the IMSA version and 7 liters in the Group C configuration; these values were increased in 1991, becoming 6.5 liters for the American version and 7.4 for the European one, whose weight was respectively 930 and 1000 kg. The XJR12 was employed by Tom Walkinshaw Racing in particular for the long distance races, such as Daytona, Sebring and Le Mans, as this car was very reliable and regular in race trim.

The car was a superb racer: in 1990, it finished 1st and 2nd in the Daytona and Le Mans 24 Hours races, and in 3rd place at Sebring. Later on, it finished in 2nd, 3rd and 4th place at Le Mans in 1991, and in 2nd at Daytona in 1992. Car #35, driven by Jones, Boesel, Feré finished 2nd at the 24h of Le Mans in 1991.

$64.99 $51.95

Save: 20% off

View this Car

This is our pick for the best Scalextric analog starter set ever—Trans-Am action with full race lap timing, counting and control. Note that this set is the only current source for the 1969 Trans-Am Mustang paint scheme and for the number 9 Camaro!

 

Scalextric C1362T American Classics Set ( Trans-Am Camaro & Mustang (ARC ONE App)

C1362T American Classics Set ( #9 Sunoco Camaro and the 1969 Red/black/white Trans-Am Mustang (ARC ONE App set)

Analogue set with wired controllers

$199.99 $169.95

Save: 15% off

View this Set

Upgrade the Scalextric C1362T American Classics Set (above) or bring your own Scalextric track up to Digital with to this C7042DC Upgrade Package. This incredible Powerbase allows you race either Scalextric Digital or by just pressing a button (and taping the lane changer flaps shut) to race two of any brand of analog car. The C7042DC “package” includes everything to upgrade your track—the Digital Plugs to convert the cars must be purchased separately. Save $80.00 on this package deal.

 

Scalextric C7042DC Digital 6-car conversion package

An ‘open-source’ output connection enables the enthusiast to connect the six car power base to a computer for additional functionality.

This new Powerbase can be used in Analogue or Digital power modes. This great feature allows the Powerbase to be used with standard 2-lane Scalextric circuits, using two cars only, or with Scalextric Digital layouts for 1-to-6 car action. All features are available in either mode.

Now the best of both worlds is offered – an all-in-one race control system for Analogue and Digital racing.

Requires the 15V Power Supply sold separately (P9303) and two Scalextric Digital throttles (C7002)—also sold separately). You will also want one or more C7036 Lane Changers. If you upgrading an existing Scalextric Digital track you will need the C7042 and the P9303 Power Supply but you can use your Scalextric Digital throttles (analog throttles will not operate the system).

NOTES:

  • If you want a complete Scalextric Digital track conversion you can purchase the C7042DC (note the “DC” on the part number and the special price) Package that includes the C7042, P9303 Power Supply, two C7002 throttles, PLUS one C7036 Lane Changer.
  • If you don’t want to tape the lane switch flaps shut when running analog, reverse the direction of the track.You also need two power supplies to run analog in both lanes.

The Digital Plugs to convert the cars must also be purchased separately—each car will require its own plug. Most Scalextric cars are Digital Plug Ready so a number C8515 Easyfit Digital Plug (for most cars) or C8516 Easyfit Digital Plug (for Scalextric Formula 1 cars) is a one-screw unplug/plug-in installation. For other brands the C7005 Digital Chip can be installed but the wire connections must be soldered. All three Digital Plugs (chips) also allow the car run on any brand of analog track (but not on other brands of digital).

$279.99 $199.95

Save: 29% off

View this Item

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

Revo Slot is a new series from Italy. The first model is a replica of the Porsche 911GT2 with six paint schemes. The bodies are injection-molded plastic and the chassis is all-new CNC-milled aluminum with a separate motor pod, set screw-mount front and rear wheels and a dozen screws. They are selling fast so order yours now.

 

Revo Slot RS0001 Porsche 911 GT2 STP # 74 Team Champion 24 Hours of Daytona 1997

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$79.50

View this Car

 

Revo Slot RS0002 Team Roock Racing 24 Hours of LeMans 1996 “Wilkinson Sword”

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$79.50

View this Car

 

Revo Slot RS0003 Porsche 911 GT2 Tiger Superflo #27 Tim Vargo 12 Hours of Sebring 1997

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$79.50

View this Car

 

Revo Slot RS0004 Porsche 911 GT2 Tiger Superflo #24 Tim Vargo Sebring 1998

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$79.50

View this Car

 

Revo Slot RS0005 Porsche 911 GT2 TSW # 64 Team Roock Racing LeMans 1998. PRE ORDER NOW!!

Revo Slot Revo Slot RS0005 Porsche 911 GT2 TSW # 64 Team Roock Racing 24 hours of LeMans 1998

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$79.50

View this Car

 

Revo Slot RS0006 Porsche 911 GT2 TSW # 65 Porsche 911 GT2 Team Roock Racing LeMans 1998

Revo Slot RS0006 Porsche 911 GT2 TSW # 65 Porsche 911 GT2 Team Roock Racing LeMans 1998

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$79.50

View this Car

 

Revo Slot RS0007 Porsche 911 GT2 white kit

Revo Slot Porsche 911 GT2 white kit

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$61.50

View this Car

Five new 1/32 scale cars have arrived from NSR. The Audi R8 and BMW Z4 are available with either anglewinder or sidewinder motor pods.

 

NSR0051AW Audi R8 ADAC GT Masters #40 ANGLEWINDER

NSR0051AW Audi R8 ADAC GT Masters #40 ANGLEWINDER

$89.99

View this Car

 

NSR0051SW Audi R8 ADAC GT Masters #40 SIDEWINDER Shark 25

NSR0051SW Audi R8 ADAC GT Masters #40 SIDEWINDER Shark 25

$89.99

View this Car

 

NSR0050SW Ford GT40 Mark IV Revival #16 SIDEWINDER Shark 20K

NSR0050SW Ford GT40 Mark IV Revival #16 SIDEWINDER Shark 20K

$89.99

View this Car

 

NSR0045AW BMW Z4 Silverstone #36 ANGLEWINDER

NSR0045AW BMW Z4 Silverstone #36 ANGLEWINDER

$89.99

View this Car

 

NSR0045SW BMW Z4 Silverstone #36 SIDEWINDER Shark 25K

NSR0045SW BMW Z4 Silverstone #36 SIDEWINDER Shark 25K

$89.99

View this Car

The January/February 2018 number 97 issue of Model Car Racing magazine is here with articles on scratchbuilding 1/32 scale classics classis and F1 cars, a comparison of the new Scalextric Ford Mk.IV to the previous models from MRRC, Le Mans Miniatures and NSR plus special Stadium race track plans and more. Add a copy to your next order.

 

MCR97 Model Car Racing magazine January/February 2018

This is a “build it yourself” special issue, with step-by-step illustrations on how to mount a body on your brass chassis and a review of 15 hand-made replicas of 1967 Formula 1 cars. The steps to install Carrera digital in Scalextric Trans-Am cars will allow you to race up to six of them at a time on a Carrera Digital track. There are full reports on the prototypes’ racing background and the performance of the 1/32 scale models of the 1967 Ford Mk.IV, 1997 Porsche 911 GT2, 2001 Audi R8 Le Mans, 2012 Lola B12/80 LMP2Le Mans and 2015 Lamborghini Huracan GT3. The track plans list all the sections needed so you can assemble a 2-Lane version of the London Olympic Stadium ROC Track on an 8 x 8-foot tabletop and a 2-Lane London Olympic Stadium ROC Track on a 9 x 13-foot tabletop with plastic track. There is also plans for HO scale AFX 2-Lane and 4-Lane London Olympic Stadium ROC Tracks on a 4 x 8-foot tabletop.

$7.95

View this Item

The sixth issue of Slot Cars Magazine is here, including articles on 1/24 scale vintage Cox cars, how to build brass-chassis for historic commercial race cars and BSRT HO hi-performance cars.

 

GBP-6 Slot Cars Spring 2017, 64 pages

The sixth issue of Slot Cars Magazine has articles on upgrading and customizing the Cox 1/24 Chaparral 2D and Ford GT40, on the soldering together brass tube replicas of Russkit and Shinoda chassis for commercial track racing.

$6.50

View this Item

Pre-order

New Cars Coming Soon

The first ready-to-race Huracan is on its way from Sideways so get your pre-order in early!

 

Racer SWCAR01A Lamborghini Huracan GT3, no. 63, 2016 British GT Championship, Spa—PRE-ORDER NOW!

Racer Lamborghini Huracan GT3, no. 63, 2016 British GT Championship, Spa-Francorchamps, driver Hunter Abbott and Rolf Ineichen

$72.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter November 23rd, 2017

November 26, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

Black Friday Five—5 Lowest Price Deals on Sets, Digital Upgrades and Cars

The MRRC sixties era GT cars are quick and perfectly detailed. This Ford Mk. IV and 910 Porsche have similar performance, which promises close racing action. Limit one to a customer. No dealers. For one week only.

 

MRRC MC0035 Ford Mk IV presentation car 1967 (C) (E)

1/32 scale slot car, ready to run on all 1/32 scale slot car tracks. This model is said to represent the livery in which the Ford MkIV was first revealed to the press. We understand that the car was never actually raced in this livery.

This car uses the MRRC/Monogram Sebring chassis. The Sebring chassis is an excellent universal 1/32 scale chassis for use with body kits and for kitbashig and scratchbuilding projects. It can be set up to handle well in both magnet and non-magnet racing. It has an adjustable wheelbase and is compact enough to fit almost any sports car, GT, or sedan body and to allow the use of wide wheels ad tires within even a relatively modest body width.

MRRC and Monogram cars using the Sebring chassis come with a variety of different wheels and tires. All of them use the same “slimline” motor which provides more than enough power for most home and club racing. They are ideal “donor cars” to provide a complete running chassis for the body of your choice at a cost often lower than purchasing the needed components separately.

$54.99 $39.95

Save: 27% off

View this Car

 

MRRC MC0051 Porsche 910 launch model 1967

1/32 scale slot car, ready to run on all
1/32 scale non-digital tracks.

This car uses the MRRC/Monogram Sebring chassis. The Sebring chassis is an excellent universal 1/32 scale chassis for use with body kits and for kitbashig and scratchbuilding projects. It can be set up to handle well in both magnet and non-magnet racing. It has an adjustable wheelbase and is compact enough to fit almost any sports car, GT, or sedan body and to allow the use of wide wheels ad tires within even a relatively modest body width.

MRRC and Monogram cars using the Sebring chassis come with a variety of different wheels and tires. All of them use the same “slimline” motor which provides more than enough power for most home and club racing. They are ideal “donor cars” to provide a complete running chassis for the body of your choice at a cost often lower than purchasing the needed components separately.

$69.95 $39.95

Save: 43% off

View this Car

This week’s pick of the race sets includes two race-ready BMW Minis in a complete race set at a bargain price.

 

Scalextric C1320T Sport – Mini Challenge Set

Scalextric C1320T Sport – Mini Challenge Set

The two Team Scalextric Mini Challenge racers go head-to-head in this set. Build four different layouts with the track supplied. This set includes a lap counter for even more excitement. The Super Resistant MINI Coopers are tough enough for full impact racing.

Each hand controller has a two-position selector switch which allows the driver to choose slow or fast speed settings to reflect the driver’s experience.

$149.99 $119.95

Save: 20% off

View this Set

Upgrade your Scalextric track (or that new set) to the best of both Digital and analog worlds with this C7042DC Upgrade Package. This is an all-in-one race control system for analog and Digital racing. You can race up to six Scalextric Digital cars or two 1/32 scale analog cars from any manufacturer by pressing a button and temporarily taping the lane-change flaps closed. To race up to six Scalextric Digital cars, remove the tape from the flaps and push the programming button to race digital. The Digital Plugs to convert the cars must be purchased separately. Save $80.00 on this package deal. If you already have a Scalextric Digital track you can upgrade it with just the C7042 (no controllers, power supply or lane changer), which is also available at a very special price.

 

Scalextric C7042DC Digital 6-car conversion package

An ‘open-source’ output connection enables the enthusiast to connect the six car power base to a computer for additional functionality.

This new Powerbase can be used in Analogue or Digital power modes. This great feature allows the Powerbase to be used with standard 2-lane Scalextric circuits, using two cars only, or with Scalextric Digital layouts for 1-to-6 car action. All features are available in either mode.

Now the best of both worlds is offered – an all-in-one race control system for Analogue and Digital racing.

Requires the 15V Power Supply sold separately (P9303) and two Scalextric Digital throttles (C7002)—also sold separately). You will also want one or more C7036 Lane Changers. If you upgrading an existing Scalextric Digital track you will need the C7042 and the P9303 Power Supply but you can use your Scalextric Digital throttles (analog throttles will not operate the system).

NOTE: If you want a complete Scalextric Digital track conversion you can purchase the C7042DC (note the “DC” on the part number and the special price) Package that includes the C7042, P9303 Power Supply, two C7002 throttles, PLUS one C7036 Lane Changer.

The Digital Plugs to convert the cars must also be purchased separately—each car will require its own plug. Most Scalextric cars are Digital Plug Ready so a number C8515 Easyfit Digital Plug (for most cars) or C8516 Easyfit Digital Plug (for Scalextric Formula 1 cars) is a one-screw unplug/plug-in installation. For other brands the C7005 Digital Chip can be installed but the wire connections must be soldered. All three Digital Plugs (chips) also allow the car run on any brand of analog track (but not on other brands of digital).

$279.99 $199.95

Save: 29% off

View this Item

 

Scalextric C7042 Digital 6-car Power Base

The C7042 Advanced 6 car Digital Powerbase can be used to race up to 6 cars on a Scalextric Digital layout at the same time or be used on a standard Scalextric two-lane layout.

The unit has a clear user interface with two levels of features to suit both the novice and experienced user.

The Skill Level option allows you to adjust the maximum power levels to individual cars so that ‘novice versus expert’ races can be run more fairly.

Hand throttles can be calibrated to equalize controller performance.

Multiple gaming modes, timed endurance and total lap format racing.

Ghost cars (PACER) function for setting 1 to 6 cars to run automatically, with switchable lane changing and lap counting on individual cars.

Setting the car ID is easy via a simple, one-button action.

This Powerbase delivers 15v for faster car performance.

An ‘open-source’ output connection enables the enthusiast to connect the six car power base to a computer for additional functionality.

This new Powerbase can be used in analog or Digital power modes. This great feature allows the Powerbase to be used with standard 2-lane Scalextric circuits, using two cars only, or with Scalextric Digital layouts for 1-to-6 car action. All features are available in either mode.

Now the best of both worlds is available – an all-in-one race control system for analog and Digital racing.

Requires the 15V Power Supply sold separately (P9303) and two Scalextric Digital throttles (C7002)—also sold separtely). You will also want one or more C7036 Lane Changers. If you are upgrading an existing Scalextric Digital track you will need the C7042 and the P9303 Power Supply but you can use your Scalextric Digital throttles (analog throttles will not operate the system).

NOTE: If you want a complete Scalextric Digital track conversion you can purchase the C7042DC (note the “DC” on the part number and the special price) Package that includes the C7042, P9303 Power Supply, two C7002 throttles, PLUS one C7036 Lane Changer.

The Digital Plugs to convert the cars must also be purchased separately—each car will require its own plug. Most Scalextric cars are Digital Plug Ready so a number C8515 Easyfit Digital Plug (for most cars) or C8516 Easyfit Digital Plug (for Scalextric Formula 1 cars) is a one-screw unplug/plug-in installation. For other brands the C7005 Digital Chip can be installed but the wire connections must be soldered. All three Digital Plugs (chips) also allow the car run on any brand of analog track (but not on other brands of digital).

$279.99 $199.95

Save: 29% off

View this Item

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

Audi sold their R8 Le Mans cars to private teams in 2001 and the result was incredible paint schemes like this Gulf-sponsored car. It is the cover car on the January/February 2018 issue of Model Car Racing magazine. The Slot.it 1/32 scale replica is here now.

 

Slot It SICA33b Audi R8 LMP – #4 – 24h Le Mans 2001 ‘Gulf’

Slot.it SICA33b Audi R8 LMP – #4 – 24h Le Mans 2001 ‘Gulf’

$59.99

View this Car

We found three new NSR cars so this may be your last chance get yours.

 

NSR NSR0016SW Ford P68 #64 ‘Gulf’ “Tribute livery”

NSR 1/32 Analog RTR Ford P68 #64 “tribute” GULF livery – Includes 20,000 RPM Shark Motor Sidewinder with lightweight drilled aluminum setscrew wheels front & back, Lightweight drilled aluminum axle gear, brass pinion, traction magnet –

$85.99

View this Car

 

NSR NSR0019AW BMW Z4 Blancpain Endurance Series 2011

NSR 1/32 Analog RTR BMW Z4 Black Presentation Blancpain Endurance Series 2011 Livery – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods –

$85.99

View this Car

 

NSR 1194AW BMW Z4 (E89) GT3 RED Test Car

NSR 1194AW BMW Z4 (E89) GT3 RED Test Car

The car is fitted with an anglewinder motor pod. An inline motor pod, pinion gear and spur gear are available at additional cost.

$77.99

View this Car

The Carrera 1/24 scale Ford GT is here so you can order yours now.

 

Carrera 23841 Ford GT Race Car “No. 24″ D124

Carrera 23841 Ford GT Race Car “No. 24″

Fantasy style supercar. The Carrera designers have left their mark on the world with the latest Ford supercar, now – for the first time in a fantasy paint job. The performance of the powerful EcoBoost-V-6 turbo engine is as impressive as ever as it brings upwards of a stunning 600PS/591.79 hp to the racetrack.
The Ford GT Race Car “TBD” is an impressive, faithfully detailed reproduction with head, tail and brake lights. This Carrera car can be individually coded, it’s digitally controllable and can also be used on a Carrera Exclusiv analogue set-up. Enjoy a pure and authentic racing atmosphere at home.

$77.49

View this Car

Two new cars are here from Carrera:

 

Carrera 27558 Ferrari 488 GT3 “AF Corse, No.68″

Carrera 27558 Ferrari 488 GT3 “AF Corse, No.68″

Let them see red. The 550PS/542.47 hp Ferrari 488 GT3 charges ahead with power drawn from a V8 engine with a bi-turbo loader. The Italian automobile manufacturers have lived up to their own honoured reputation again with this car in the traditional red of Ferrari.

$36.99

View this Car

 

Carrera 30809 Ferrari 488 GT3 “AF Corse, No.68″ D132

Carrera 30809 Ferrari 488 GT3 “AF Corse, No.68″

Let them see red. The 550PS/542.47 hp Ferrari 488 GT3 charges ahead with power drawn from a V8 engine with a bi-turbo loader. The Italian automobile manufacturers have lived up to their own honoured reputation again with this car in the traditional red of Ferrari. The Carrera DIGITAL 132 Ferrari 488 GT3 “AF Corse, No.68″ slotcar is an impressive, faithfully detailed reproduction with head, tail and brake lights. This Carrera car can be individually coded, is digitally controllable and guarantees authentic racing thrills.

$54.99

View this Car

 

Carrera 30789 Porsche 911 Carrera S Cabriolet “Cam Shaft” D132

Carrera 30789 Porsche 911 Carrera S Cabriolet “Cam Shaft”-

Right at the front with Porsche!
This sports car is Porsche’s best-known model – and not without good reason. Driven by a rear-mounted 414.25 hp engine, this car can accelerate from 0 to 100 Km/h / 62.13 mph in 4.3 seconds. This super racer also looks amazing from top to bottom. The luxurious design with golden rims guarantees jealous stares all round!

$54.99

View this Car

The new Carrera set has the police chasing the Laborghini Huracan on a figure 8 track with overpass.

 

Carrera 25227 Speed Patrol set

24.3-foot lap length, 7.7 x 7.5- foot area

Too fast for the cops. This race pits the Porsche 911 Polizei against the Lamborghini Huracan LP 610-4. The two opponents indulge in a red hot car chase around the curvy 7.4-metre/24.28 ft. circuit. The awe-inspiring V10 Lamborghini Huracan LP 610-4 engine produces 601.65 hp and can shoot from 0 to 100 km/h / 62.13mph in just 3.2 seconds. The Porsche 911 in its detailed police livery also has a flashing blue light. Inexhaustible determination lets his quarry know there’s almost no chance to escape.

$199.99

View this Set

We just received the new-for-2018 figure sets from Carrera. It’s a good time to populate your track!

 

Carrera 21127 Set of figures, audience

Modern decoration for the race track!

Extremely detailed and coloured figures. Revolving and movable parts of the body.
5 figures: 3 sitting, 2 standing

$18.99

View this Item

 

Carrera 21128 Set of figures, fans

Modern decoration for the race track!

Extremely detailed and coloured figures. Revolving and movable parts of the body.
15 figures: 12 sitting, 3 standing

$42.99

View this Item

 

Carrera 21129 Set of figures grandstand

Modern decoration for the race track!

Extremely detailed and coloured figures. Revolving and movable parts of the body. 20 figures sitting

$56.99

View this Item

The low-cost Professor Motor Controllers are now in stock with 25 ohm and with 90 ohm resistors (in addition the “standard” 60 ohm) so you can select a controller to match your cars.

 

PMTR2142 25 Ohm Resistor Controller w/Alligator Clips (for hi-amp motors)

PMTR2142 25 Ohm Resistor Controller w/Alligator Clips (for hi-amp motors)

$39.99

View this Item

 

PMTR2143 25 Ohm Resistor Controller w/NO Clips/Boots (for hi-amp motors)

PMTR2143 25 Ohm Resistor Controller w/NO Clips/Boots (for hi-amp motors)

$39.99

View this Item

 

PMTR2140 90 Ohm Resistor Controller w/Alligator Clips (for HO cars)

PMTR2140 90 Ohm Resistor Controller w/Alligator Clips (for HO cars)

$39.99

View this Item

The easy way to setup Ninco and Fly cars to run without downforce magnets—just pop-out the magnet and pop-in one of these heavy tungsten weights.

 

PMTR1800 8mm dia. x 2mm high Tungsten Chassis Weights – 8mm Round

PMTR1801 8mm dia. x 2mm high Tungsten Chassis Weights – 8mm Round to insert in NSR, Older Ninco & Older Fly

$6.99

View this Item

 

PMTR1801 8mm dia. x 5mm high Tungsten Chassis Weights – 8mm Round

PMTR1802 8mm dia. x 5mm high Tungsten Chassis Weights – 8mm Round to insert in NSR, Older Ninco & Older Fly

$6.99

View this Item

Pre-order

New Cars Coming Soon

Five new cars, including the wild Union Jack Jaguar E-Type, are due to arrive next week so pre-order yours to be sure you get them.

 

Scalextric C3849 McLaren 12C GT3, Pacific Racing (Anime)—PRE-ORDER NOW!

Scalextric C3849 McLaren 12C GT3, Pacific Racing (Anime)

The 2015 Autobacs Super GT Series is the 22nd season of the Japan Automobile Federation Super GT Championship including the All Japan Grand Touring Car Championship (JGTC) era, and the 11th season under the name Super GT. The season will begin on April 5 and will end on November 15, after 8 races. Pacific Racing entered a McLaren 12C in the GT300 series in which cars are built a run FIA GT3 specifications.

$49.99

View this Car

 

Scalextric C3853 Mercedes AMG GT3 Gulf, winner 2015 Paul Ricard 24 hour—PRE-ORDER NOW!

Scalextric C3853 Mercedes AMG GT3 Gulf, winner 2015 Paul Ricard 24 hour

The Mercedes AMG GT3 was announced in 2015 at the Geneva Motor Show, as the race version of the GT. Using the 6.2-litre V8 from the SLS AMG GT3, the GT3 also has a significantly lower weight aided by carbon-fiber-reinforced polymer, which allows the GT3 to comply with racing regulations. With around 550bhp, the AMG GT3 looks to improve upon the popular, and incredibly successful SLS AMG GT3, and conquer the competitive GT3 bracket. Mercedes-AMG, based in Affalterbach, Germany have been engineering and customizing Mercedes for decades and still stick to their often quoted, ‘one man, one engine’ philosophy with engine builders proudly marking each engine built with a plaque displaying their name once complete.

$49.99

View this Car

 

Scalextric C3871 Caterham Superlight Lee Wiggins—PRE-ORDER NOW!

Scalextric C3871 Caterham Superlight Lee Wiggins

The Superlight R300-S Championship is the pinnacle of Caterham Seven Motorsport. Lee Wiggins has become a regular in the series finishing 3rd in the 2015 season. The start of the 2016 season took place at Brands Hatch and Lee took a 2nd and a 3rd place finishes there.

$49.99

View this Car

 

Scalextric C3874 Chevrolet Camaro 1971 Trans Am—PRE-ORDER NOW!

C3874 Chevrolet Camaro 1971 Trans Am

This Camaro was Originally raced in the 1971 Trans-Am series by Brock Yates. It is now being driven by Jim Reed in the Historic Trans-Am

$49.99

View this Car

 

Scalextric C3878 Jaguar E-Type Union Jack—PRE-ORDER NOW!

Jaguar E-Type Union Jack

Famously called “the most beautiful car ever made” by Enzo Ferrari, the Jaguar E-Type was originally unveiled at the 1961 Geneva Motor Show as a high performance and competitively priced sports car.

The legend goes that the E-Type selected to be unveiled at the 1961 Geneva Motor Show was driven from the Browns Lane plant in Coventry, by Jaguar executive Bob Berry to Geneva arriving just 20 minutes before the global reveal with only a few minutes for a quick wipe down.

More than 50 years after its launch the Jaguar E-Type is widely considered a design icon and notable landmark in automotive history, and one that you too can recreate in its swinging 60’s inspired paintwork.

$49.99

View this Car

Five new cars, including the wild Union Jack Jaguar E-Type, are due to arrive next week so pre-order yours to be sure you get them.

 

MMK78A Mercedes-Benz 300SL no. 21 winner Le Mans 1952—PRE-ORDER NOW!

MMK78A Mercedes-Benz 300SL no. 21 winner Le Mans 1952, drivers Hermann Lang and Fritz Riess

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78B Mercedes-Benz 300SL no. 20 second at Le Mans 1952—PRE-ORDER NOW!

MMK78B Mercedes-Benz 300SL no. 20 second at Le Mans 1952, drivers Theo Helfrish and Nerbert Niedermayer

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78C Mercedes-Benz 300SL no. 22 dnf (generator failure in ninth hour) at Le Mans 1952—PRE-ORDER

MMK78C Mercedes-Benz 300SL no. 22 dnf (generator failure in ninth hour) at Le Mans 1952, drivers Karl Kling and Hans Klenk/

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78D Mercedes-Benz 300SL no. 613 Mille Miglia 1952 fourth overall—PRE-ORDER NOW!

MMK78D Mercedes-Benz 300SL no. 613 Mille Miglia 1952 fourth overall, drivers Rudi Caracciola and Kurrle

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78E Mercedes-Benz 300SL no. 623, Mille Miglia 1952, second overall—PRE-ORDER NOW!

MMK78E Mercedes-Benz 300SL no. 623, Mille Miglia 1952, second overall, drivers Karl Kling and Hans Klenk

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78F Mercedes-Benz 300SL no. 626, Mille Miglia 1952, dnf

MMK78F Mercedes-Benz 300SL no. 626, Mille Miglia 1952, dnf, drivers Hermann Lang and Grupp

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78G Mercedes-Benz 300SL no. 18, German GP Race 1952, green—PRE-ORDER NOW!

HMMK78G Mercedes-Benz 300SL no. 18, German GP Race 1952, green

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78H Mercedes-Benz 300SL no. 20, German GP Race 1952, blue—PRE-ORDER NOW!

MMK78H Mercedes-Benz 300SL no. 20, German GP Race 1952, blue

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78R Mercedes-Benz 300SL no. 16, German GP Race 1952, red—PRE-ORDER NOW!

MMK78R Mercedes-Benz 300SL no. 16, German GP Race 1952, red

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

The Audi R8 in screaming Gulf blue and orange is the cover car on the January/February 2018 issue of Model Car Racing magazine. It is due on the usual first week of every other month schedule so you can Pre-order it now.

 

MCR97 Model Car Racing magazine January/February 2018—PRE-ORDER NOW!

This is a “build it yourself” special issue, with step-by-step illustrations on how to mount a body on your brass chassis and a review of 15 hand-made replicas of 1967 Formula 1 cars. The steps to install Carrera digital in Scalextric Trans-Am cars will allow you to race up to six of them at a time on a Carrera Digital track. There are full reports on the prototypes’ racing background and the performance of the 1/32 scale models of the 1967 Ford Mk.IV, 1997 Porsche 911 GT2, 2001 Audi R8 Le Mans, 2012 Lola B12/80 LMP2Le Mans and 2015 Lamborghini Huracan GT3. The track plans list all the sections needed so you can assemble a 2-Lane version of the London Olympic Stadium ROC Track on an 8 x 8-foot tabletop and a 2-Lane London Olympic Stadium ROC Track on a 9 x 13-foot tabletop with plastic track. There is also plans for HO scale AFX 2-Lane and 4-Lane London Olympic Stadium ROC Tracks on a 4 x 8-foot tabletop

$7.95

View this Item

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter September 28th, 2017

October 1, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

ONLY AT ELECTRIC DREAMS

Special sale on the last of the Lamborghini supercars from Autoart:

 

Autoart 13161 Lamborghini Gallardo, metallic yellow, lighted (C)

Autoart 13161 Lamborghini Gallardo, metallic yellow, lighted (C)

$39.95 $34.95

Save: 13% off

View this Car

 

Autoart 13142 Lamborghini Murcielago Roadster, Gold, metallic gold, lighted (C)

Autoart 13142 Lamborghini Murcielago Roadster, Gold, metallic gold, lighted (C)

$39.95 $34.95

Save: 13% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

Two of the incredible Porsche 917LH from Le Mans 1970 are available now as limited production hand-made cast-resin race cars from Le Mans Miniatures

 

Le Mans Miniatures LMM-132070/25M Porsche 917 LH no.25, Le Mans 1970 retired 18th hour

Le Mans Miniatures LMM-132070/25M Porsche 917 LH no.25, Le Mans 1970 retired 18th hour, driver Vic Elford

Cast-resin bodies with etched-metal details and wire wheels. Ready to race. Hand-made in France.

$121.79

View this Car

 

Le Mans Miniatures LMM-1320101/3M Porsche 917 LH no. 3, Le Mans 1970 second overall

Le Mans Miniatures LMM-1320101/3M Porsche 917 LH no. 3, Le Mans 1970 second overall, driver Gerard Larrouse.

Cast-resin bodies with etched-metal details and wire wheels. Ready to race. Hand-made in France.

$121.79

View this Car

Pre-order

New Cars Coming Soon

The popular Martini livery is on this new Le Mans (Group 5) Lancia (the teammate to the previous SW22 Sideways number 67 Lancia) from Sideways and a few are on their way so pre-order yours now.

 

Racer SW54 Lancia Beta Montecarlo Gr.5 Martini Le Mans 24hrs 1981—PRE-ORDER NOW!

Racer (Sideways) SW54 Lancia Beta Montecarlo Gr.5 Martini Le Mans 24hrs 1981 dnf, drivers Riccardo Patrese, Hans Heyer and Piecarlo Ghinzani

$69.99

View this Car

The cast-resin hand-painted ‘Red Bull’ pit personnel is also on its way from Sideways so you can pre-order her now.

 

SWFIG-011 Red Bull’ pit person with umbrella—PRE-ORDER NOW!

SWFIG-011 Red Bull’ pit person with umbrella. Cast resin, hand-painted.

$19.95

View this Item

Two new cars are coming from NSR. The C6R ‘Gulf’ Corvette is available with a Boxer-style anglewinder motor, a “Baby King”-size anglewinder motor or with a ‘Shark” 25,000 rpm sidewinder motor. The Porsche is a limited edition for the “Revival”. It is time to pre-order yours now.

 

NSR NSR0044AW Corvette C6R Gulf Livery #15 Anglewinder King Motor–PRE-ORDER NOW!

NSR NSR0044AW Corvette C6R Gulf Livery #15 Anglewinder King Motor NSR 1/32 Analog Corvette C6R Gulf Livery #15 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Clear Coat Finish over paint & Tampo printing for maximum durability & Gloss – Adjustable suspension motor pod

$88.99

View this Car

 

NSR NSR0044AWBK Corvette C6R Gulf Livery #15 Anglewinder Baby King motor–PRE-ORDER NOW!

NSR Corvette C6R Gulf Livery #15 Anglewinder Baby King motor NSR 1/32 Analog Corvette C6R Gulf Livery #15 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced BABY KING Motor 17,000 RPM 245 g-cm torque Magnetic Effect – Clear Coat Finish over paint & Tampo printing for maximum durability & Gloss – Adjustable suspension motor pod

$88.99

View this Car

 

NSR NSR0044SW Corvette C6R Gulf Livery #15 Sidewinder Shark motor–PRE-ORDER NOW!

NSR 1/32 Analog Corvette C6R Gulf Livery #15 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – SIDEWINDER Balanced Shark Motor 25,000 RPM & 176 g-cm Torque – Clear Coat Finish over paint & Tampo printing for maximum durability & Gloss – Adjustable suspension motor pod

$88.99

View this Car

 

NSR NSR0047SW Porsche 917K #7 Revival Limited Edition–PRE-ORDER NOW!

NSR NSR0047SW Porsche 917K #7 Revival Limited Edition (Verva Street Racing 2011) Sidewinder Shark Motor 20,000 RPM & 164g-cm torque – EVO Chassis with adjustable front axle ride height – Lightweight drilled aluminum setscrew wheels front & back – Ultra smooth and quiet all metal gearing – Heat treated axles with self lubricating bushings – Neodymium traction magnet – Clear coat finish over paint and Tampo printing for maximum durability and high gloss

$88.99

View this Car

The first 1/32 scale replica of the 1985 Ferrari Formula 1 car is coming from Ostorero as a cast-resin hand-painted model. Their production is very limited so pre-order yours now.

 

Ostorero ODG197 Ferrari 156/85 no. 28 GP Canada 1985 RTR—PRE-ORDER NOW!

Ostorero ODG197 Ferrari 156/85 no. 28 GP Canada 1985, driver Stefan Johansson (7th in the 1985 Championship), RTR

Hand-made cast-resin model with etched and cast detail parts.

$306.99

View this Car

A new bargain-price controller is coming from Professor Motor with a choice of six connectors (alligator clips, old-style Carrera terminals, 3.5mm stereo plug, RJ plug, no clips/boots or with banana plugs) to match your track.

 

PMTR2134 35 Ohm Resistor Controller w/Alligator Clips–PRE-ORDER NOW!

Professor Motor 35 Ohm Resistor Controller – Includes 16 gage 42″ PVC insulated wire harness, nickel plated alligator clips with color coded insulating boots and electronic self resetting circuit breaker to protect against accidental misconnect

This controller is NOT polarity sensitive – Recommended Applications : Stock or mildly tuned RTR Cars (1/32 Scalextric, Carrera, Ninco, Monogram, etc.), stock to moderate tuned HO

Easily upgraded with a rotary pot to provide adjustable variable braking performance,

Available in clear only

$39.99

View this Item

 

PMTR2135 35 Ohm Resistor Controller w/old-style Carrera Terminals–PRE-ORDER NOW!

Professor Motor 35 Ohm Resistor Controller – Includes 16 gage 42″ PVC insulated wire harness, Carrera old-style (three-hole socket) terminals color coded and electronic self resetting circuit breaker to protect against accidental misconnect

This controller is NOT polarity sensitive – Recommended Applications : Stock or mildly tuned RTR Cars (1/32 Scalextric, Carrera, Ninco, Monogram, etc.), stock to moderate tuned HO

Easily upgraded with a rotary pot to provide adjustable variable braking performance

Available in Clear

$39.99

View this Item

 

PMTR2136 35 Ohm Resistor Controller 3.5mm Stereo Plug–PRE-ORDER NOW!

Professor Motor 35 Ohm Resistor Controller – Includes single cord insulated wire harness, 3 Pin Stereo Plug for Scalextric / Older Ninco and electronic self resetting circuit breaker to protect against accidental misconnect

This controller is NOT polarity sensitive – Recommended Applications : Stock or mildly tuned RTR Cars (1/32 Scalextric, Carrera, Ninco, Monogram, etc.), stock to moderate tuned HO

Easily upgraded with a rotary pot to provide adjustable variable braking performance

Available in Clear

$39.99

View this Item

 

PMTR2137 35 Ohm Resistor Controller RJ Plug–PRE-ORDER NOW!

Professor Motor 35 Ohm Resistor Controller – Includes coiled cord insulated wire harness, RJ Phone type plug for newer Ninco and electronic self resetting circuit breaker to protect against accidental misconnect

This controller is NOT polarity sensitive – Recommended Applications : Stock or mildly tuned RTR Cars (1/32 Scalextric, Carrera, Ninco, Monogram, etc.), stock to moderate tuned HO

Easily upgraded with a rotary pot to provide adjustable variable braking performance

Available in Clear

$39.99

View this Item

 

PMTR2138 35 Ohm Resistor Controller w/NO Clips/Boots–PRE-ORDER NOW!

Professor Motor 35 Ohm Resistor Controller – Includes color coded 16 gage 42″ PVC insulated wire harness, NO Clips/Boots (bare end connector wires) and electronic self resetting circuit breaker to protect against accidental misconnect

This controller is NOT polarity sensitive – Recommended Applications : Stock or mildly tuned RTR Cars (1/32 Scalextric, Carrera, Ninco, Monogram, etc.), stock to moderate tuned HO

Easily upgraded with a rotary pot to provide adjustable variable braking performance

Available in Clear

$39.99

View this Item

 

PMTR2139 35 Ohm Resistor Controller w/Banana Plugs–PRE-ORDER NOW!

Professor Motor 35 Ohm Resistor Controller – Includes 16 gage 42″ PVC insulated wire harness, Color coded banana plugs and electronic self resetting circuit breaker to protect against accidental misconnect

This controller is NOT polarity sensitive – Recommended Applications : Stock or mildly tuned RTR Cars (1/32 Scalextric, Carrera, Ninco, Monogram, etc.), stock to moderate tuned HO

Easily upgraded with a rotary pot to provide adjustable variable braking performance

Available in Clear

$39.99

View this Item

You can upgrade the power supply for your Carrera Digital 132 and 124 track with the PMTR1400 Power supply using this newfused connector cable.

 

PMTR1400W Carrera Digital 132/124 wire harness for aftermarket transformer–PRE-ORDER NOW!

PMTR1400W Carrera Digital 132/124 silicone wire harness for aftermarket transformer (PMTR1400 and others).

6 Ft. Heavy 13 gage silicone insulated wire harness for direct connect of high performance power supply to Carrera Digital 132 / 124

Harness comes with both a 5 and 7.5 amp fuse, for the Control Unit ( 30352 ) insert the 7.5 amp fuse in the harness before use, for the Black Box ( 30344 ) insert the 5 amp fuse before use.

$59.99

View this Item

Revo Slot is a new series from Italy. The first model is a replica of the Porsche 911GT2 with six paint schemes. The bodies are injection-molded plastic and the chassis is all-new stamped aluminum with a separate motor pod, set screw-mount front and rear wheels and a dozen screws. Be the first to race it on your track by pre-ordering now.

 

Revo Slot RS0001 Porsche 911 GT2 STP # 74 Team Champion 24 Hours of Daytona 1997—PRE-ORDER NOW!

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$79.50

View this Car

 

Revo Slot RS0002 Team Roock Racing 24 Hours of LeMans 1996 “Wilkinson Sword”—PRE-ORDER NOW!

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$79.50

View this Car

 

Revo Slot RS0003 Porsche 911 GT2 Tiger Superflo #27 Tim Vargo 12 Hours of Sebring 1997-PRE-ORDER NOW

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$79.50

View this Car

 

Revo Slot RS0004 Porsche 911 GT2 Tiger Superflo #24 Tim Vargo Sebring 1998—PRE-ORDER NOW!

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$79.50

View this Car

 

Revo Slot RS0005 Porsche 911 GT2 TSW # 64 Team Roock Racing LeMans 1998—PRE-ORDER NOW!

Revo Slot RS0005 Porsche 911 GT2 TSW # 64 Team Roock Racing 24 hours of LeMans 1998

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$79.50

View this Car

 

Revo Slot RS0006 Porsche 911 GT2 TSW # 65 Porsche 911 GT2 Team Roock Racing LeMans 1998—PRE-ORDER

Revo Slot RS0006 Porsche 911 GT2 TSW # 65 Porsche 911 GT2 Team Roock Racing LeMans 1998

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$79.50

View this Car

 

Revo Slot RS0007 Porsche 911 GT2 white kit—PRE-ORDER NOW!

Revo Slot Porsche 911 GT2 white kit

1/32 scale Porsche 911 GT2 with an aluminum chassis with a motor pod and 21,000 rpm angle winder motor. Set-screw mount aluminum front and rear wheels. A new driving experience can be set up with or without magnet.

$61.50

View this Car

The 1/32 scale replicas of one of the Porsche 924s that raced at Le Mans in 1980 and a JPS vintage racer collector version are on their way from Falcon Slot so it is time to pre-order yours.

 

Falcon Slot 09004 Porsche 924 Le Mans 1980 sixth overall—PRE-ORDER NOW!

Porsche 924 Carrera GT Turbo Le Mans 1980 sixth overal, drivers Manfred Schurti/Jurgen Barth/Eberhard Braun.

Falcon Slot is a new company created in 2017 by the founder of Fly. The new cars look very much like the original Fly cars with one-piece sidewinder chassis but with an adjustable front axle.

$78.99

View this Car

 

Falcon Slot 09FA2 Porsche 924 Carrera GT Turbo J.P.S ‘Flying Again’ Limited Edition–PRE-ORDER NOW!

Falcon Slot 09FA2 Porsche 924 Carrera GT Turbo J.P.S ‘Flying Again’ Limited Edition series
Falcon Slot is a new company created in 2017 by the founder of Fly. The new cars look very much like the original Fly cars with one-piece sidewinder chassis but with an adjustable front axle.

$113.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter July 6th, 2017

July 9, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

We discovered a few of these Lego-like cars made for kids to build (and rebuild after each crash) from Scalextric. They run great on any 1/32 scale analog track and the prices are bargains.

C3708 Quick Build Black Skull hot rod

C3708 Quick Build Black Skull hot rod Build, Race and Destroy! Enjoy a high-speed car chase with these extreme drift and slide cars, but be careful, crash or collide and your car will be in pieces! This great value Super Resistant car is ideal for younger races who like full-contact chase action.

Features Include:

– Sticker sheets included

– Super resistant cars

– Easy change pick-ups

– Magnatraction

– Self-build using QuickBuild system

Single car included with two alternative decorative sticker designs

$39.99 $31.95

Save: 20% off

View this Car

C3709 Quick Build Police Car

Build, Race and Destroy! Enjoy a high-speed car chase with this extreme drift and slide car, but be careful, crash or collide and your car will be in pieces! This ‘cop car’ features a flashing roof light and siren and can be customised with clip-on wheels, decal sheets and mix and match parts. This great value Super Resistant car is ideal for younger races who like full-contact chase action.

Features Include:

– 360-degree powerslides

– Sticker sheets included

– Super resistant cars

– Easy change pick-ups

– Magnatraction

– Self-build using QuickBuild system

$39.99 $31.95

Save: 20% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

The Slot.it Cinzano-sponsored 1972 Alfa Romeo 33/3 is here now.

Slot It SICA11 Alfa Romeo 33/3, n.8 ‘CINZANO’

SICA11I Alfa Romeo 33/3 – #8 – 1000 Km Buenos Aires 1972

$69.99

View this Car

The Slot.it Castrol-sponsored Alfa 155 V6 TI DTM sedan racer and the Miller-sponsored Porsche 962 from the IMSA series have arrived. You can order yours now.

Slot It SICA35D Alfa Romeo 155 V6 T1 ‘Castrol’ n.26

Slot It SICA35D Alfa Romeo 155 V6 T1 ‘Castrol’ n.26, Nurburgring DTM 1994, driver Carsten Struwe

The Alfa Romeo 155 V6 TI is a racing car built to race in the DTM (Deutsche Tourenwagen Meisterschaft) series in 1993. At that time the German Touring Car Championship was the peak of technology for touring car racing, and it reserved for cars of Class 1 (first division or D1). The rules mandated cars with an engine displacement of 2.5 liters and 6 cylinders at most, derived from approved models and produced in no less than 25,000 units. The rules allowed deep changes to the car, provided that the external lines were maintained.
When Alfa Romeo introduced its 420 bhp, four-wheel drive 155, the more conventional rear-wheel drive Mercedes 190 couldn’t matched Alfa’s performance. In 1993, the Italian car dominated the category, winning 12 races out of 20 with its the two factory drivers, thus winning both drivers and constructors titles. To date, the Alfa Romeo 155 is the only non-German car to have won a DTM championship.

$69.99

View this Car

Slot It SICA25E Porsche 962 IMSA n.14 “Miller”

Porsche 962 IMSA Group C #14 – 24h Daytona 1988, drivers D. Bell, Al Holbert, C. Robinson

$69.99

View this Car

The wild Spyker C8 from the 24-hour race at Spa in 2006 is available now.

Scale Auto SC6075R Spyker C8 Laviolette GT2R 24hr Spa 2006 #85

Scale Auto SC-6075R Spyker C8 Laviolette GT2R 24hr Spa 2006 #85

$64.99

View this Car

The great all-new cars from Falcon Slot sold out but we were able to get a few more. We will fill orders in the sequence in which they are received.

Falcon Slot 09FA1 Porsche 908/3T Turbo Martini no.97 ‘Flying Again’ Limited Edition

Falcon Slot Porsche 908/3T Turbo Martini no.97 ‘Flying Again’ Limited Edition Vintage Racing series.

This car is a “collectible” in a special presentation box with a very limited production. It is a replica of a car currently being raced in vintage events (Falcon Slot calls the series “Flying Again”)

Falcon Slot is a new company created in 2017 by the founder of Fly. The new cars look very much like the original Fly cars with one-piece sidewinder chassis but with an adjustable front axle.

$109.99

View this Car

Falcon Slot 09002 Porsche 908/3T Turbo no. 2, Hockenheim “Grand Prix” 1982, 8th, driver Jurgen Bart

Falcon Slot Porsche 908/3T Turbo no. 2, Hockenheim “Grand Prix” 1982, 8th, driver Jurgen Barth. Falcon Slot is a new company created in 2017 by the founder of Fly. The new cars look very much like the original Fly cars with one-piece sidewinder chassis but with an adjustable front axle.

$68.99

View this Car

Falcon Slot 09003 Porsche 908/3T Turbo Nuremberg 200 6th 1983

Falcon Slot 09003 Porsche 908/3T Turbo Nuremberg 200 6th 1983 driver Jochen Dauer

Falcon Slot is a new company created in 2017 by the founder of Fly. The new cars look very much like the original Fly cars with one-piece sidewinder chassis but with an adjustable front axle.

$71.99

View this Car

The white Ford GT40 Mk.II that raced at Le Mans in 1969 and the second C7.R Corvette from Le Mans 2014 are here from NSR but quantities are limited so order yours now.

NSR NSR0041SW Ford GT40 Mark II #68 ’69 LeMans 24 Hours

NSR 1/32 Analog RTR Ford GT40 Mark II #68 1969 24 Hours of LeMans – EVO Chassis with adjustable front axle ride height – Includes 20,000 RPM Shark Motor Sidewinder – Lightweight drilled aluminum setscrew wheels front & back – Ultra smooth & quiet lightweight drilled aluminum axle gear & brass pinion – Suspension type motor pod – Heat treated axles with self lubricating bronze bushings – traction magnet – Photo Etched stainless steel grills – Clear coat finish over Tampo printing and paint for high gloss and maximum durability – Photo Etched stainless steel grills, body produced from 3 separate sections for improved detail, fully accessorized and painted body shell weighs 19 grams and the complete car 70 grams

$88.99

View this Car

NSR NSR0026AW #74 Corvette C7R 24 Hours of LeMans 2014

NSR NSR0026AW #74 Corvette C7R 24 Hours of LeMans 2014. Includes 20,000 RPM Shark Motor Sidewinder with lightweight drilled aluminum setscrew wheels front & back, Lightweight drilled aluminum axle gear, brass pinion, traction magnet

$86.99

View this Car

Pre-order

New Cars Coming Soon

These three super-fast NSR cars are expected by the end of the month so it is time to pre-order yours.

NSR NSR0052AW Corvette C7R White Kit—PRE-ORDER NOW!

NSR 1/32 Analog Chevrolet Corvette C7R White Kit – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO 2 Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods

$79.99

View this Car

NSR NSR0040SW Abarth 500 Trofeo Selenia #7—PRE-ORDER NOW!

NSR 1/32 Analog RTR Abarth 500 Trofeo Selenia #7 – Adjustable front axle ride height – Sidewinder Sark 20,000 RPM Motor – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Adjustable suspension type motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Clear Coat Finish for maximum durability and high gloss – Includes the EVO Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods

$84.99

View this Car

NSR NSR0039AW Audi R8 Ebrahim Motors 2013 #20—PRE-ORDER NOW!

NSR 1/32 Analog RTR AUDI R8 Audi R8 Ebrahim Motors Brazilian GT Championship 2013 #20 – Includes : Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Lightweight drilled aluminum setscrew wheels all around – All metal setscrew mount super smooth gearing – Heat treated axles – Machined bronze self lubricating bushings – Adjustable suspension motor pod – Anglewinder balanced King Motor with 21,400 RPM & 350 g-cm Torque “Magnetic Effect” – Clear coat finish over top of paint for best durability & high gloss

$84.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter April 20th, 2017

April 23, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

EXCLUSIVE AT ELECTRIC DREAMS

There are relatively few 1/24 scale cars but we found one of the best examples from Autoart and this Lambo is on a special sale for just one week so order yours now.

 

Autoart 14022 Lamborghini Murcielago, metallic green 1/24

Autoart 14022 Lamborghini Murcielago, metallic green 1/24.

$49.99

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

We just received thirteen new cars from Scale Auto including the 2014 Porsche 911 RSR cars from Daytona 2014 and the class-winning 2015 Daytona Viper. All are very limited production so order yours now.

 

Scale Auto SC6042R Spyker C8 Spyder GT2R – Racing AW – 24H. LeMans 2006 #86

“R Sreies” chassis with North American spec Red “hard” pod for smooth and or high grip tracks.

Photo shows standard release this car comes with the new Red pod for North America.

$64.99

View this Car

 

Scale Auto SC6040R DeTomaso Pantera GR.3 #318, Jagermeister with Red pod

Aluminum wheels at the back, plastic on front. With the new “R Series” chassis and the red (hard) anglewinder pod.

Adjustable front axle height.

$64.99

View this Car

 

Scale Auto SC6050R Spyker C8 Laviolette GT2R #85

Spyker Squadron team car for the 2008 Le Mans 24 Hour race.

Come with the new “R Series” chassis and the “hard” red pod. For smooth and high grip tracks.

Images sow the standard black pod all N American releases come with the red pod

$64.99

View this Car

 

Scale Auto SC6051R Spyker C8 Laviolette GT2R #94

Spyker C8 Laviolette GT2R – Racing – 24H. LeMans 2008 #94 This car comes with the R Series chassis and the hard red anglewinder pod.

Images show car with standard black pod. All American releases come with the hard “Red’ pod anglewinder.

$64.99

View this Car

 

Scale Auto SC6053R Spyker C8 GT2R #85

Spyker Squadron, LeMans 2006

New R Series chassis.

Aluminum wheels at the back, plastic on front.

Adjustable front axle height, red “hard” anglewinder pod fitted to this car.

The N American production comes with the new hard Red pod for high grip and smooth tracks.

$64.99

View this Car

 

Scale Auto SC6065R “R Series” chassis angle winder. Porsche 991 RSR #92 ‘Manthey Racing

Scaleauto SC6065R “R Series” chassis angle winder. Porsche 991 RSR #92 ‘Manthey Racing’ This car comes with the red hard pod for the North American market. These pods have shown to be better on smooth and high grip tracks.

Car is shown with the standard black pod, but is fitted with the red for North America.

Porsche ‘factory’ entry in the 2013 Le Mans 24 Hour race.

Drivers Marc Lieb, Richard Lietz and Romain Dumas finished 15th overall and 1st in GTE ‘Pro’ just ahead of and on the same lap as the #91 sister car with drivers Jörg Bergmeister, Patrick Pilet and Timo Bernhard.

$64.99

View this Car

 

Scale Auto SC6066R “R Series” chassis Porsche 991 RSR #91 ‘Manthey Racing’

This car comes with the new Red “hard” pod for high grip or smooth tracks. As shown it has the standard black angle winder pod all N American cars come with the Red Pod.

Porsche ‘factory’ entry in the 2013 Le Mans 24 Hour race.

Drivers Jörg Bergmeister, Patrick Pilet and Timo Bernhard finished 16th overall and 2nd in GTE ‘Pro’ just behind and on the same lap as the #92 sister car with drivers Marc Lieb, Richard Lietz and Romain Dumas. The #92 car is available in 1/32 scale as SC6965R.

$64.99

View this Car

 

Scale Auto SC6082R ‘Q8′ Subaru Impreza WRC #20

Andrea Dallavilla and navigator Danilo Fappani finished 8th in the 1988 Rally San Remo.

This car comes with the new “R Series” chassis and the Red ( hard ) motor pod.

$64.99

View this Car

 

Scale Auto SC6084R De Tomaso Pantera Gr.3

SC6084R De Tomaso Pantera Gr.3 – Racing R Series chassis and new hard Red pod fitted to this N American release.

$64.99

View this Car

 

Scale Auto SC6107R SRT Viper GTS-R Exchange #33 Racing AW – 24H. Daytona

Scale Auto SC6107R SRT Viper GTS-R Exchange #33 Racing AW – 24H. Daytona “R Series chassis with the latest red angle winder pod.

$64.99

View this Car

 

Scale Auto SC6108R SRT Viper GTS-R Exchange #93 – Racing AW – 24H. Da- 24H. Daytona

SC6108R SRT Viper GTS-R Exchange #93 – Racing AW – 24H. Daytona 2015 Winner.

Comes with the lastest “R Series chassis and the red pod for high grip and smooth tracks.

$64.99

View this Car

 

Scale Auto SC6139R Porsche 991 RSR Daytona 2014 #911

ScaleAuto SC6139 Porsche 991 number 911 Daytona 2014 winner, drivers Nick Tandy, Patrick Pilet and Kevin Estre.

Latest design “R Series” chassis, now with Red Hard pod for smooth and high grip tracks.

$64.99

View this Car

 

Scale Auto SC6140R Porsche 991 RSR GT3 – Racing Angle Winder version – 24H. Daytona

ScaleAuto SC6140 Porsche number 912 Daytona 2014, driven by by Earl Bamber, Michael Christensen and Frédéric Makowiecki.

Latest design “R Series” chassis, now with Red Hard pod for smooth and high grip tracks.

$64.99

View this Car

Four new cars have arrived from NSR and all of them have the super-quick NSR pod-style chassis. Order yours now.

 

NSR NSR0025AW Corvette C7R #73 24 Hours of LeMans 2014

NSR 1/32 Analog Chevrolet Corvette C7R LMS – #73 24 Hours of LeMans 2014 LMGTE Pro – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO 2 Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods.

$86.99

View this Car

 

NSR NSR0032AW BMW Z4 “Gulf” Livery #025

NSR 1/32 Analog RTR BMW Z4 “Gulf” Livery #025 Limited Edition – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods.

$84.99

View this Car

 

NSR NSR0033SW Abarth 500 Assetto Corsa Martini #224

NSR 1/32 Analog RTR Abarth 500 Assetto Corsa Martini #224 – Adjustable front axle ride height – Sidewinder Sark 20,000 RPM Motor – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Adjustable suspension type motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Clear Coat Finish for maximum durability and high gloss – Includes the EVO Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods.

$84.99

View this Car

 

NSR NSR0054AW Mosler MT900R EVO5 NSR Racing Team #64

NSR 1/32 Analog RTR Mosler MT900R EVO 5 NSR Racing Team S. Noviello #64 4th Anniversary Livery – Evo 5 Triangular motor pod chassis – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO 5 Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods.

$84.99

View this Car

Pre-order

New Cars Coming Soon

Sideways has shipped their replica of the IMSA Mustang in the correct red markings. It is on the way so you can place your pre-order now.

 

Racer SW46M Mustang Turbo – Bill Scoot Racing – IMSA GTX – Mid Ohio 1981, ‘Miller’—PRE-ORDER NOW!

Racer (Sideways) SW46M Mustang Turbo – Bill Scoot Racing – IMSA GTX – Mid Ohio 1981. ‘It’s Miller Time’, driver Klaus Ludwig.

$64.99

View this Car

The new Sideways Monster Energy pit personnel will be here in a few weeks so you can pre-order yours now.

 

SWFIG-015 Monster Energy Umbrella Girl—PRE-ORDER NOW!

SWFIG-015 Monster Energy Umbrella Girl.

$16.95

View this Item

Nine new cars are coming in early May from Scalextric including the incredible Rum Bum Audi and the first two bargain-priced GT Lightning cars in Anime carton markings. Pre-order yours now.

 

Scalextric C3837 Team GT Lightning – Team GT Sunset (Anime)—PRE-ORDER NOW!

Scalextric C3837 Team GT Lightning – Team GT Sunset (Anime) high-impact crash resistant generic modern GT car.

$24.99

View this Car

 

Scalextric C3838 Team GT Lightning – Team GT Sunrise (Anime)—PRE-ORDER NOW!

Scalextric C3838 Team GT Lightning – Team GT Sunrise (Anime) high-impact crash resistant generic modern GT car.

$24.99

View this Car

 

Scalextric C3842 McLaren P1, Purple —PRE-ORDER NOW!

The McLaren P1 is a limited production plug-in hybrid sports car by British manufacturer McLaren Automotive. The concept car debuted at the 2012 Paris Motor Show. Deliveries to retail customers began in the UK in October 2013. The entire P1 production of 375 units was sold out by November 2013. The production run ended in December 2015. It is considered to be the long-awaited successor to the McLaren F1, utilizing hybrid power and Formula 1 technology. It does not have the same three seat layout as its predecessor. The design of the headlights is very similar to the shape of the McLaren logo. Just like the McLaren F1 road car of 1992, the McLaren P1 is a mid-engine, rear-wheel drive design that uses a carbon fibre monocoque and roof structure safety cage concept called MonoCage, which is a development of the MonoCell used in the current MP4-12C and MP4-12C Spider upgrade that came out in early 2012.

$49.99

View this Car

 

Scalextric C3850 McLaren 12C GT3, Von Ryan Racing—PRE-ORDER NOW!

The 2013 Total 24 Hours of Spa was the 65th running of the 24 Hours of Spa. It was also the fourth round of the 2013 Blancpain Endurance Series season. Von Ryan Racing were running the Mclaren 12C and after qualifying 28th Chris Goodwin, Rob Barff and Bruno Senna had a tough race ahead but managed to finish in 15th.

$49.99

View this Car

 

Scalextric C3851 Porsche 911 RSR, Falken Tire—PRE-ORDER NOW!

Scalextric C3851 Porsche 911 RSR, Falken Tire
Marking the one year anniversary of the debut of Valentina, the team’s 991 generation 911 RSR, Falken where looking confidently forward to returning to Sebring. They showed strong running at Daytona until an engine failure forced retirement. During the race over 5 hours was spent under caution but the Porsche driven by Wolf Henzler, Bryan Sellers and Patrick Long managed to keep out of trouble and finish in 12th overall and 3rd in there GTLM Class.

$49.99

View this Car

 

Scalextric C3854 Audi R8 LMS, Rum Bum Racing—PRE-ORDER NOW!

The 2013 Rolex Sports Car Series season was the fourteenth and final season of the Grand American Road Racing Association’s premier series, before merging up with the American Le Mans Series in 2014. It began on January 26, with the 51st running of the 24 Hours of Daytona. Rum Bum Racing entered the event this year running an Audi R8, after a disappointing Qualifying they would start the race in 32nd position, however they managed to stay clear of danger during the gruelling race finishing 15th overall and 7th in the class.

$49.99

View this Car

 

Scalextric C3862 BTCC BMW 125 Series 1 Rob Collard—PRE-ORDER NOW!

Rob Collard has become a house hold name in the BTCC now with over 400 race starts to his name. Rounds 7, 8 and 9 took Place at the high speed Thruxton circuit, with extremely high temperatures being experienced at the circuit, round 7 was full of incident and a huge amount of punctures towards the end of the race eventually resulting in a multi car crash causing a red flag. Collard would finish 5th. The next 2 races were reduced in distance as a result and Collard would go on to finish 2nd and 6th in the next 2 races.

$49.99

View this Car

 

Scalextric C3864 BTCC VW Passat, Aron Smith—PRE-ORDER NOW!

The first 3 rounds of the BTCC season took place at Brands Hatch. It turned out to be a very good weekend for Aron Smith and team BKR. Smith Qualified 10th and went on to finish the races in 7th, 3rd and 8th.

$49.99

View this Car

 

Scalextric C3873 BMW Mini Cooper F56, Mini Challenge 2016—PRE-ORDER NOW!

Luke Reade races in the F56 class in Mini Challenge, Donington Park was where the action was taking place on the 23/24 April 2016. Unfortunately, Luke was unable to take place in the first race due to technical issues, but his teams mechanics worked hard to get him out for race 2 where he finished 15th out of 29 runners.

$49.99

View this Car

The first 1/32 scale replica of the Talbot Lago T150SS that won its class at the Pebble Beach concours and competed at LeMans in 1939 is coming this summer as a hand-made cast-resin model with etched detail parts from MMK. MMK only makes a few so you will need to pre-order to be sure you get yours.

 

SF24T Talbot Lago T150SS LeMans1939 dnf, drivers Philippe de Massa and Jean Norbert Mahe—PRE-ORDER

SF24T Talbot Lago T150SS LeMans`1939 dnf, drivers Philippe de Massa and Jean Norbert Mahe

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$189.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter April 6th, 2017

April 9, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

 

Sale Items – Great Values!

Here’s where you will find unique items, special purchases, overstocks, closeouts, and and other bargains. When we get an extra-low special price from our sources we pass the savings on to you!

View these Items

There are over 300 bargain-discount cars under the “Special Sale Cars” listing, including these two Fly classic Porsches:

 

Fly A521 Porsche 911 GT1 Evo, GrandAm, 2003 (C) (E)

Victory Junction Camp car driven by Gunnar Jeanette, Kyle Petty, and Paul Newman, 2003.

$64.99 $49.95

Save: 23% off

View this Car

 

Fly A1605 Porsche Carrera 6 (906), Targa Florio 1966 (C) (E)

WAS $64.99 1/32 scale slot car, ready to run on all 1/32 scale slot car tracks.

$59.95

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

The May/June 2017 number 93 issue of Model Car Racing is here with articles on the Scalextric 1971 Javelin Trans-Am and Ford Riley Daytona Prototype, that Slot.it ‘crocodile’ and more.

 

MCR93 Model Car Racing Magazine, May/June 2017 (C)

The do-it-yourself techniques for soldering motor wires and that you can use to build your own brass chassis are in this issue. There’s steps-by-step installation tips for converting Scalextric Trans-Am cars to race on Carrera Digital. Learn the history of the unusual Le Mans Audi R8 ‘crocodile’ car. There are full reports on the prototypes’ racing background and the performance of the 1/32 scale models of the 1950 Talbot-Lago T26GS LeMans, 1971 AMC Javelin Trans-Am,, 2010 Lola B10/60 LeMans, 2000 Audi R8 ‘Crocodile’ LeMans, 2015 VW Passat BTCC and 2015 Ford, Riley Daytona Prototype . There are plans so you can assemble a 2-Lane version of the Daytona Twisted Raceway for 9 x 12-feet and 5 x 9-feet with plastic track. There is also a plan for an HO scale AFX 4-Lane version of the Daytona Twisted Raceway on a 4 x 8-foot tabletop.

$7.95

View this Magazine

Pre-order

New Cars Coming Soon

The entire Carrera 2017 product line, including 1/32, 1/24 and 1/43 scale cars, sets and some new figures, is now available for pre-order. Some of these cars will only be available in limited quantities so place your pre-orders now.

 

New Releases 2017 Carrera

View these Items

Three new gorgeous and super-quick cars are coming from NSR.

 

NSR NSR0032AW BMW Z4 “Gulf” Livery #025—PRE-ORDER NOW!

NSR 1/32 Analog RTR BMW Z4 “Gulf” Livery #025 Limited Edition – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods.

$84.99

View this Car

 

NSR NSR0033SW Abarth 500 Assetto Corsa Martini #224—PRE-ORDER NOW!

NSR 1/32 Analog RTR Abarth 500 Assetto Corsa Martini #224 – Adjustable front axle ride height – Sidewinder Sark 20,000 RPM Motor – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Adjustable suspension type motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Clear Coat Finish for maximum durability and high gloss – Includes the EVO Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods.

$84.99

View this Car

 

NSR NSR0054AW Mosler MT900R EVO5 NSR Racing Team #64—PRE-ORDER NOW!

NSR 1/32 Analog RTR Mosler MT900R EVO 5 NSR Racing Team S. Noviello #64 4th Anniversary Livery – Evo 5 Triangular motor pod chassis – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO 5 Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods.

$84.99

View this Car

More performance parts are on there way from NSR including:

 

NSR NSR5010 Air system DRILLED 16.5 x 8.3mm aluminum wheels

NSR NSR5010 Air system DRILLED 16.5 x 8.3mm aluminum wheels – for 3/32 axle.

$14.39

View this Item

 

NSR NSR5270 Ultragrip 19.5 x 10mm SLICK Tires for 16.5mm Wheels pkg. 4—PRE-ORDER NOW

NSR NSR5270 Ultragrip 19.5 x 10mm SLICK Tires for 16.5mm Wheels (4 tires).

$8.99

View this Item

 

NSR NSR5271 Supergrip 19.5 x 10mm SLICK Tires for 16.5mm Wheels (pkg. 4)—PRE-ORDER NOW!

NSR NSR5271 Supergrip 19.5 x 10mm SLICK Tires for 16.5mm Wheels (4 tires).

$8.99

View this Item

The multi-million dollar Alfa Romeo 8C 2900B Spider is coming soon in 1/32 scale from Slot Classics as a hand-made model ready-to-run or as a painted kit. There will only be a few so you must pre-order.

 

Slot Classic CJ47RTR Alfa Romeo 8C 2900B Spider “Concours de Elegance”–PRE-ORDER NOW!

Slot Classic CJ47 Alfa Romeo 8C 2900B Spider “Concours de Elegance” ready to run.

The “street” version of 1938 Mille Miglia-winning Alfa Romeo.

Custom-made cast-resin body with etched-metal parts. Fully assembled with metal wheels.

$351.99

View this Car

 

Slot Classic CJ47KPP Painted KIT Alfa Romeo 8C 2900B Spider “Concours de Elegance”–PRE-ORDER NOW!

The “street” version of 1938 Mille Miglia-winning Alfa Romeo

Custom-made cast-resin body with etched-metal parts. Painted body, clear windows with complete unassembled chassis with metal wheels.

The photo is the assembled model–the kit may require some detail painting—product is unassembled 1/32 scale kit to operate on most brands of 1/32 or 1/24 scale track.

$279.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter February 16th, 2017

February 20, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

Trans-Am double-discount deal. We have lowered the previous discounts on these two 1970 Camaro Z/28 Trans-Am cars as a February special but the deal ends February 28 so order yours while you can.

 

Scalextric C3431 1970 Camaro, Tony DeLorenzo (C)

1/32 scale slot car. Ready to run on all 1/32 scale non-digital slot car tracks. Digital plug ready. Accepts C8515 plug-in digital chip. Ready to run on all 1/32 and 1/24 scale non-digital tracks. Model of car driven by Tony DeLorenzo in the SCCA TransAm Championship.

$54.99 $39.95

Save: 27% off

View this Car

 

Scalextric C2896 1970 Camaro TransAm car, Jim Hall / Vic Elford (C)

1/32 scale slot car. Ready to run on all 1/32 scale non-digital slot car tracks Digital plug ready. Accepts C8515 plug-in digital chip.

This car was driven first by Jim Hall and later by Vic Elford. Elford drove it to victory in the 1970 Watkins Glen TransAm, Chevrolet’s only victory that year.

$69.99 $45.95

Save: 34% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

 

NSR NSR0022AW Chevrolet Corvette C7R RED Test Car

NSR 1/32 Analog RTR Chevrolet Corvette C7R LMS RED Test Car – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO 2 Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods.

$87.99

View this Car

 

NSR NSR0031AW Mosler MT900R #101 Spirit Kia

NSR 1/32 Analog RTR Mosler MT900R #101 Spirit Kia Livery Evo 5 Triangular motor pod chassis – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO 5 Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods.

$87.99

View this Car

Pre-order

New Cars Coming Soon

Five new cars are coming from Flyslot, starting with two 250LM Ferraris, then the first Lancia 037 cars from Fly in a long, long time. They never make enough of them so get your pre-order in now.

 

Fly 037102 Renault 5, Monte Carlo Rally 1984, drivers Jean-Luc Therier/Michel Vial—PRE-ORDER NOW!

Fly 037102 Renault 5, Monte Carlo Rally 1984, drivers Jean-Luc Therier/Michel Vial.

$59.95

View this Car