We will be shipping/receiving and open for in store sales every weekday with the exception of Wednesdays.
We will be re-open for Wednesday business November 22. We will be closed Thursday October 26. We will be open Friday October 27.

Shop   |   Log In   |   Search    
Shop Site

Newsletter October 5th, 2017

October 8, 2017 by  
Filed under Newsletter Archive 2017

Comments Off


We have reduced the prices on all of the newest Slot.it cars by 14% and more. The supply is limited so order yours now.

 

Slot It SICA03i Porsche 962C LH #9 Le Mans 1990 ‘Mizuno’

SICA03i Porsche 962C LH #9 Le Mans 1990 ‘Mizuno’

PRICE ROLLBACK on select Slot.it Cars

The Porsche 962 was a sport-prototype racing car created to replace the already successful Porsche 956, in order to allow Porsche to race in the Americans IMSA and WSC Group C competitions. It was one of the most successful racing cars ever and it won several competitions all over the world:

• – World Sport-Prototype Championship in 1985/86
• – 24h Le Mans in 1986/87 and 1994
• – IMSA GTP Championship in 1985/86/87/88
• – 24h Daytona in 1985/86/87, 1989 and 1991
• – 12h Sebring in 1985/86/87/88

The engine was a boxer, 6 cylinders, with two turbos, liquid-cooled, 4 valves per cylinder, double overhead camshaft. On the 3 factory cars entered in the ’24 Hours’ in 1988, displacement had been increased to 3 liters. In those years, cars used ‘long’ shaped tails to have the less possible drag on the ‘Les Hunaudières’ straight. During qualifying, the works 962C reached a maximum speed of 391 kph. This car raced at Le Mans in 1990 in the blue and white livery of sponsor Mizuno and was driven by Louis Krages, Stanley Dickens, Bob Wollek.

$59.99

View this Car

 

Slot It SICA08E Lancia LC2 (Long Tail) WEC Fuji 1000km 1985

SICA08E LC2 (Long Tail) WEC Fuji 1000km 1985,

PRICE ROLLBACK on select Slot.it Cars

$49.99

View this Car

 

Slot it SICA10I McLaren F1 GTR n.44 ‘LARK’

Slot it SICA10I McLaren F1 GTR n.44 ‘LARK’

PRICE ROLLBACK on select Slot.it Cars

$49.99

View this Car

 

Slot.it SICA11G Alfa Romeo 33/3 2nd- 1971 Targa Florio #2

Slot.it SICA11G Alfa Romeo 33/3 2nd- 1971 Targa Florio #2

PRICE ROLLBACK on select Slot.it Cars

$49.99

View this Car

 

Slot.it SICA11H Alfa Romeo 33/3 n.32 12h Sebring 1971

Slot.it SICA11H Alfa Romeo 33/3 n.32 12h Sebring 1971-

PRICE ROLLBACK on select Slot.it Cars

$49.99

View this Car

 

Slot It SICA11 Alfa Romeo 33/3, n.8 ‘CINZANO’

SICA11I Alfa Romeo 33/3 – #8 – 1000 Km Buenos Aires 1972

PRICE ROLLBACK on select Slot.it Cars

$59.99

View this Car

 

Slot.It SICA13E Jaguar XJR12 1st Daytona 1990

SICA13E Jaguar XJR12 1st Daytona 1990

PRICE ROLLBACK on select Slot.it Cars

$49.99

View this Car

 

Slot.it SICA14E Nissan R390 GT1 LT #31 LeMans 1998

Nissan R390 GT1 LT #31 “Zexel” LeMans 1998

PRICE ROLLBACK on select Slot.it Cars

$49.99

View this Car

 

Slot.It SICA17D Porsche 962C KH 1st Brands Hatch 1990

Slot.It SICA17D Porsche 962C KH 1st Brands Hatch 1990

PRICE ROLLBACK on select Slot.it Cars

$49.99

View this Car

 

Slot It SICA17E Porsche 962C KH n.17 ‘REPSOL’

Slot It SICA17E Porsche 962C KH n.17 ‘REPSOL’

PRICE ROLLBACK on select Slot.it Cars

$59.99

View this Car

 

Slot.It SICA19E Toyota 88C no.45 “STP”

Slot.It SICA19E Toyota 88C no.45 “STP”

PRICE ROLLBACK on select Slot.it Cars

$59.99

View this Car

 

Slot It SICA20C Ford MKII 1966 no. 5 Third LeMans, Ronnie Bucknum, Dick Hutcherson

Slot.it SICA20C Ford MKII 1966 no. 5 Third LeMans, Ronnie Bucknum, Dick Hutcherson

PRICE ROLLBACK on select Slot.it Cars

$59.99

View this Car

 

Slot.It SICA21E Lancia LC2 #6 1000Km Brands Hatch 1986

Slot.It SICA21E Lancia LC2 #6 1000Km Brands Hatch 1986

PRICE ROLLBACK on select Slot.it Cars

$49.99

View this Car

 

Slot.it SICA22D Lola B10/60 #12 LeMans 2010

Lola B10/60 #12 LeMans 2010

PRICE ROLLBACK on select Slot.it Cars

The Swiss Rebellion Racing team engaged two Lola B10/60 at the Le Mans 24 Hours 2010; the number 13 was driven by Nicolas Prost, Neel Jani and Marco Andretti. the Lola B10/60 was created to compete in the LMP1 category, according to the ACO regulations. Lola has built cars for Le Mans since 1999; even the factory MG and Aston Martin cars were designed by the English constructor. In 2008, Lola was the first to offer a Coupe design available to privateer teams. The chassis monocoque and the gearbox housing are made of carbon fiber composite. The suspension is push-rod on both the front and the rear axle, with springs operated via rockers. Gearbox X-track 6 speeds, operated via paddle shift. Brakes have 4 pistons AP Racing calipers and carbon vented rotors. The Lola was powered by a Judd GV 5.5 liter V10 Judd with 4 valves per cylinder and double overhead camshaft. Displacement was 5.5 liters and weight 135 kilograms; the maximum power, with the two air restrictors required by the Rules, is 650 hp at 7000 rpm.

1/32 scale slot car, ready to run on all 1/32 scale non-digital slot car tracks. 1/32 scale slot car. New guide design offers greater strength in the guide mounting and should help prevent broken chassis due to impacts or limit-of-travel stresses on the guide.

Tire recommendation: Super Tires 1407-1410.

$54.99

View this Car

 

Slot.it SICA24C Audi R18 TDI 24h Le Mans ’11

SICA24C Audi R18 TDI 24h Le Mans ’11

PRICE ROLLBACK on select Slot.it Cars

$49.99

View this Car

 

Slot.It SICA25D Porsche 962 IMSA #10 WYNN’S 24 Hr Daytona 1987

Slot.It SICA25D Porsche 962 IMSA #10 WYNN’S 24 Hr Daytona 1987

PRICE ROLLBACK on select Slot.it Cars

$49.99

View this Car

 

Slot It SICA27B Matra Simca MS670B 24h Le Mans 1974

Slot.It SICA27B Matra Simca MS670B 24h Le Mans 1974.

PRICE ROLLBACK on select Slot.it Cars

The Matra-Simca MS 670 was a Prototype race car that won the Le Mans 24 Hours 3 times in a row (from 1972 to 1974) as well as the World Manufacturers Championship twice (1973 and 1974). The car was designed by Bernard Boyer and Jean-Louis Caussin. The long tail version, designed in ’74 for Le Mans, was still called ‘670 B’, ‘B’ being the distinctive letter of all Matras that were fitted with the Porsche 5-speed gearbox.The chassis was an aluminium monocoque, with fiberglass body.

The engine was a 3-litres V12 at 60°, with aluminium block and head; bore was 79.7 mm and stroke 50.0 mm. Its sound was extremely loud. The version used in ’74 for Le Mans was the ‘MS 73′, with a maximum torque of 320 Nm at 8400 rpm, reaching a maximum power of 450 HP at 10500 rpm. On the Mulsanne straight the car could top 320 kph. Brakes had Girling ventilated discs, all-round; in 1974, the rear brakes were moved inboard. Rims dimensions were 13” x 11” at front and 15” x 15” at rear. The car weighted 693 kg. There were three ‘670 B’s racing in Le Mans in 1974. Number 9 was driven by Jean-Pierre Jabouille and François Migault.

$49.99

View this Car

 

Slot It SICA28C Nissan R90V no.85, AJSPC Suzuka 500Km

Slot.it SICA28C Nissan R90V no.85, AJSPC Suzuka 500Km , drivers T. Wada, O. Nakako.

PRICE ROLLBACK on select Slot.it Cars

Will run on Scalextric Digital with installation of SISP15 module

$54.99

View this Car

 

Slot It SICA28D Nissan R89C no.25, LeMans 1989

SICA28D Nissan R89C no.25, LeMans 1989, drivers G.Brabham, C. Robinson and A. Llluyendyk

PRICE ROLLBACK on select Slot.it Cars

$59.99

View this Car

 

Slot.it SICA34A Porsche 962C 85 LeMans 1987 Fourth “Leyton House”

Slot.it SICA34A Porsche 962C 85 LeMans 1987 Fourth “Leyton House” , G Fouche, F. Konrad, W. Taylor

PRICE ROLLBACK on select Slot.it Cars

$49.99

View this Car

 

Slot It SICA35A Alfa Romeo 155 V6 Ti 1993 no.7 Hockenheimring DTM

SICA35A Alfa Romeo 155 V6 Ti 1993 no.7 Hockenheimring DTM, driver Alessandro Nannini.

PRICE ROLLBACK on select Slot.it Cars

This new breed of Slot.it racers includes the finest reproduction of the amazing cars that raced in the German Touring Car Championship in the early ninties.

The cars in this series are inline, with a new motor (MX15, 21000 RPM / 150g*cm @12V) and motor pod (inline offset 0.5), and are all can be upgraded with the Slot.it 4wd system.

$59.99

View this Car

 

Slot It SICA35B Alfa Romeo 155 V6 Ti 1994 Zolder DTM no. 27 ‘Jagermeister’

SICA35B Alfa Romeo 155 V6 Ti 1994 Zolder DTM no. 27 ‘Jagermeister’

PRICE ROLLBACK on select Slot.it Cars

$59.99

View this Car

 

Slot It SICA35D Alfa Romeo 155 V6 T1 ‘Castrol’ n.26

Slot It SICA35D Alfa Romeo 155 V6 T1 ‘Castrol’ n.26, Nurburgring DTM 1994, driver Carsten Struwe

PRICE ROLLBACK on select Slot.it Cars

The Alfa Romeo 155 V6 TI is a racing car built to race in the DTM (Deutsche Tourenwagen Meisterschaft) series in 1993. At that time the German Touring Car Championship was the peak of technology for touring car racing, and it reserved for cars of Class 1 (first division or D1). The rules mandated cars with an engine displacement of 2.5 liters and 6 cylinders at most, derived from approved models and produced in no less than 25,000 units. The rules allowed deep changes to the car, provided that the external lines were maintained.
When Alfa Romeo introduced its 420 bhp, four-wheel drive 155, the more conventional rear-wheel drive Mercedes 190 couldn’t matched Alfa’s performance. In 1993, the Italian car dominated the category, winning 12 races out of 20 with its the two factory drivers, thus winning both drivers and constructors titles. To date, the Alfa Romeo 155 is the only non-German car to have won a DTM championship.

$59.99

View this Car

 

Slot It SICA36A Opel Calibra Hockenheimring DTM 1995 no. 9

SICA36A Opel Calibra Hockenheimring DTM 1995 no. 9

PRICE ROLLBACK on select Slot.it Cars

$59.99

View this Car

 

Slot It SICW17 Audi R18 n.2 Le Mans 2013 Le Mans Winner Collection, Limited Edition

SICW17 Audi R18 n.2 Le Mans 2013 Le Mans Winner Collection, Limited Edition

PRICE ROLLBACK on select Slot.it Cars

$64.99

View this Car

We made a special search and found three of the extraordinary hand-made Le Mans Miniatures cast resin kits. These are not ready to race but the bodies are painted and all of the decals to recreate their markings are included so you can complete the model.

 

LeMans Miniatures 132006KP Audi R8 LeMans 2004, PAINTED KIT (C)

PRICE REDUCED 20%. Complete, unassembled, painted kit.

$137.95 $109.95
Save: 20% off

View this Car

 

LeMans Miniatures 132013KP Audi R8, PAINTED KIT (C)

PRICE REDUCED 20%. 2002 LeMans winner, complete, unassembled kit with painted body. Builds up into a complete running car.

$141.95 $109.95
Save: 23% off

View this Car

 

LeMans Miniatures 132016KP Pescarolo C60 Judd, PAINTED KIT (C)

PRICE REDUCED 20%. Builds up into a complete running car. Complete painted, unassembled kit with decals to model either the #16 or #17 car. LeMans 2006.

$139.95 $109.95
Save: 21% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

The first new race sets of the season include one of the best wireless App sets and one of the least expensive sets —the easiest way to get started racing.

 

Scalextric C1369 International Super GT Set

75 x 52 inch area, 190-inch lap length

These two rugged GT sports cars are ready to hit the track on one of four different layout configurations. Perfect for younger racers, the cars are Super Resistant and ready to withstand even the most intense races. Both hand controllers also have adjustable power settings to allow young racers to stay on track.

Features Include:

Lap counter
4 Multiple Track layouts
2 x Speed Limiter Hand Controller

Set Includes:

GT Neon No.26 GT Car
LMP Cobolt No.11 GT Car
6 x Radius 2 90 Curve
4 x Radius 2 45 Curve
Powerbase
Lap Counter
2 x Hand throttle with Speed Limiter
Track Support
4 x Braid Plates

$99.99

View this Set

 

Scalextric C1359 ARC Air 24h Le Mans Set – Porsche 911 RSR

Scalextric C1359 ARC Air 24h Le Mans Set – Porsche 911 RSR

95 x 95 inch area, 268 inch lap length

ARC Air lap counting, lap timing and race control system two 2.4GhZ wireless controllers

Features Include
– Manage your Race with listed app on your Smart Device
– ‘Race Incidents’ Feature
– Multiple 12 Track Layouts
– Five-and-out Light Start
– Lap Counter
– Fuel Usage
– Tyre Wear
– Brake Wear
– Pit Lane Pit Stop
– Post-race Statistics
– Variable Weather Conditions

ARC AIR Wireless Controllers
– Ergonomically Designed
– Power Level Control
– Easy to Bind to Powerbase
– Feel the Race with the Rumble Pack (easy to switch on/off)
– 5m Range with 2.4Ghz Wireless Technology

Recreate the epic 24 hour race of Le Mans with two classic Porsche 911s. Who will come out on top? Complete with 2 ergonomically designed wireless controllers and all the thrills and spills that ARC AIR has to offer, slot racing just got a whole lot more real!

$274.99

View this Set

This is the present you want this Christmas! The most exciting race car set of the year. Group 5 BMW vs. Zaxspeed Capri with digital lane-changing and wireless controllers. Quantities are limited so get it now.

 

Carrera 30197 ’80 Flashback D132 set (Group 5 Capri and M1)

The fatest cars from the eighties, Group 5 BMW vs. Zaxspeed Capri on a 26-foot course with two lane-changer tracks.

5.1 x 9.8-foot area, 26.9-foot lap length

One double-lane change track section PLUS one curved single lane-change track section.

The set with cult status
The tracks start to vibrate when these racers hit the circuit. Mario Andretti’s BMW M1 Procar and the Ford Capri Zakspeed Turbo run by the Würth-Kraus-Zakspeed team use the whole bendy 8.2-metre/26.9 ft. Carrera racing circuit to show what they’re capable of. Risky overtaking manoeuvres, lane changes and drifts push the drivers to the limits of their concentration. 2.4 GHz WIRELESS+ Technology and a wireless, ultra-light handset guarantee complete freedom of movement for drivers. These faithfully reproduced classics should be a part of every Carrera collection!

$479.99

View this Set

This is the Carrera Go!!! set your kids will want most so order yours now.

 

Carrera 62431 Mario Kart™ 1/43 scale set

Carrera 62431 Mario Kart™ 1/43 scale set

29.2-foot lap length, 7.2 x 3.2-foot area

A perfect match
Mario and Luigi jump in their new Special Circuit Karts for a speedy spin around the Carrera GO!!! racetrack. Which of the two will finish first this time? After the fly-over they race at full speed around the loop and take all the momentum with them into the steep bend. The 6.2-metre/20.34 ft.racetrack boasts a fly-over, junction and high speed straights for the perfect nerve-tingling experience out on a wild chase. The world famous brothers from the Mario Kart racing series deliver neck and neck racing action and speed. Their cars have been given stylish designs with perfect racing looks for a battle like this. It’s time for a thrilling head-to-head!

$102.99

View this Set

The latest issue of Model Car Racing magazine is here with full reports on the new Slot.it Le Mans Matra, the SRC Capris and Carrera’s Ford GT, BMW M1 and Zakspeed Capri Group 5. Add a copy to your next order.

 

MCR96 Model Car Racing magazine November/December 2017—PRE-ORDER NOW!

You can race slot cars without the standard-issue downforce magnets for the most realistic simulation of real car race control. There are three full race track tests of cars running magnet-free in this issue. Few slot cars are fitted with digital chips but you can changeover most Scalextric-brand cars with a simple plug-in chip that can be reused over and over again to allow you to race dozens of different cars with just a few chips. There are full reports on the prototypes’ racing background and the performance of the 1/32 scale models of the 1966 Lola T70. 1973 Matra MS670B, 1976 Capri 2600 RS, 1979 BWM M1 Procar, 1981 Ford Capri Zakspeed Turbo and 2016 Ford GT. The track plans list all the sections needed so you can assemble a 2-Lane version of the Kingdom Raceway on a 5 x 9-foot ping-pong tabletop and a 4-Lane Paramount Ranch Track on a 9 x 14-foot tabletop with plastic track. There is also a plan for an HO scale AFX 4-Lane Bow-Tie II Track on a 4 x 8-foot tabletop.

$7.95

View this Item

The new Nissan R90 from Slot.it is here at a lower price.

 

Slot It SICA28E Nissan R90CK n.27 ‘FromA’

Slot It SICA28E Nissan R90CK n.27 ‘FromA’

$59.99

View this Car

Slot.it promised this their replica of the 1973 Matra-Simca (a new body with the long tail) last December and it is here now ready-to-race and as an unpainted white kit (it is also the cover and feature car in the new number 96 issue of Model Car Racing magazine).

 

Slot It SICA37A Matra-Simca MS670B LM73 # 10 LeMans 1973

SICA37A Matra-Simca MS670B LM73 # 10 LeMans 1973 drivers J.P. Beltoise and F. Cevert

$59.99

View this Car

The Scalextric Bentley raced by Team HTP and the BMW Z4 driven by Alex Zanardi are here now but in very limited quantities so order yours now.

 

Scalextric C3855 BMW Z4 GT3 ROAL Motorsport Spa 2015, Alex Zanardi

Scalextric C3855 BMW Z4 GT3 ROAL Motorsport Spa 2015 drivers Alex Zanardi, Timo Glock and Bern Spengler

$49.99

View this Car

 

Scalextric C3846 Bentley Continental GT3, Team HTP Blue

Scalextric C3846 Bentley Continental GT3, Team HTP Blue

The HTP youngsters Buhk and Abril showed a great performance in the first race of the Sprint Series on Russian soil. A third place finish in the qualifying race laid the perfect foundation for the feature race. Starting from third, Abril quickly took the lead after a great start and immediately created a gap. Buhk took over the Bentley Continental GT3 from the Monegasque driver halfway through the race and eventually secured the victory in the 60-minute race. After 36 laps, Buhk took the chequered flag with a margin of more than seven seconds.

$49.99

View this Car

This Maserati 250F is likely to be the most desirable of all the Scalextric 60th Anniversary cars because it is (by chance) painted in the official United States of America blue on white racing colors. It is the seventh (of seven) cars in the Limited Edition Scalextric 60th Anniversary series. We found a few of five of the first six (C3827A is sold out) so you can have yours if you order now.

 

Scalextric C3825A 60th Anniversary Coll. no.7 – 1950s, Maserati 250F Limited Edition

Scalextric 60th Anniversary Collection – 1950s, Maserati 250F Limited Edition

Launched in 1957, Scalextric was the brain child of Bertram ‘Fred’ Francis, the talented inventor behind a range of mechanical tin toys. The first Scalextric cars were tin too and powered by a small electric motor, instead of the more common clockwork cars of the time. This new toy took off and by 1958 Francis had sold his idea to Tri-ang, who looked to invest. Tri-ang produced newer cars in plastic and the range of vehicles offered started to expand.
The very first car released by Scalextric in 1957 was the Maserati 250F, then the car to have in Grand Prix racing with Juan Manuel Fangio scoring his legendary final win in one at the 1957 German Grand Prix. In this race he overcome a 48 second deficit in just 22 laps and broke the lap record 10 times in one race. The very first Scalextric set featured two of these cars and perfectly captured both the glamour and beauty of motor racing cars of the period. The 250F was phased out of F1 racing shortly afterwards, but remains one of the most iconic and beautiful F1 cars of all time, a shining testament to the bravery of the early F1 World Championship competitors.

$57.99

View this Car

 

Scalextric C3826A 60th Anniversary Collection no. 6-1960s, Jaguar E-Type LimitedEd.

Scalextric C3826A 60th Anniversary Collection – 1960s, Jaguar E-type Limited Edition

Despite being debuted in the 1950s, it was the 60s that really saw Scalextric come to prominence as one of the best known toys across the globe. With countless new cars, from the Ferrari 250SWB and Jaguar E-type, right down to Go-Karts and the humble Mini; Scalextric had a car for everyone to race at home. Countless accessory buildings and track pieces were added and the range blossomed, with superstars like the Beatles even having a go! But the celebrity endorsements were not limited to pop stars, Jim Clark, Graham Hill and Various other racing drivers of the era all had their own Scalextric sets.

No other car symbolises the swinging sixties quite like the Jaguar E-type, manufactured by Jaguar Cars Ltd between 1961 and 1975 its combination of beauty, high performance and competitive pricing established the marque as an icon of 1960s motoring. On its release Enzo Ferrari called it “The most beautiful car ever made”, the Lightweight was also very successful on track and in smaller races with Graham Hill and Roy Salvadori seeing the top step of the podium in E-types. In Australia Bob Jane won the 1963 Australian GT Championship in an E-type Lightweight and even today it continues to be a force to be reckoned with in classic GT racing around the world.

$57.99

View this Car

 

Scalextric C3829A 60th Anniversary Collection no.4-1990s, BMW E30 M3 Limited Ed.

Scalextric C3829A 60th Anniversary Collection – 1990s, BMW E30 M3 Limited Edition

As Scalextric moved into the 1990s it followed another shift in motorsport. Throughout the 1980s rallying and Group B had dominated the airwaves and press, but as that declined, touring car racing, most notably Super Touring, took its place. As the BTCC, DTM and other national series gained in popularity, Scalextric began producing these cars.

One manufacturer above others dominated this form of motorsport, BMW. Although production of the BMW M3 E30 started in the ‘80s it saw considerable success in the early ‘90s, winning the BTCC title in 1990 and 1991, along with numerous DTM, Italia Superturismo Championships and Australian races. It also enjoyed considerable success in the rally category.

As the decade moved on, the BMW M3 E30 was to be found racing in lesser series and is even now a common club racing saloon car; as well as being an icon all other performance saloons aspire to. Other new items introduced in the ‘90s by Scalextric were the horse racing sets, as well as various cars driven by the greats of the era: Senna, Schumacher and Hill, all immortalised by Scalextric. With design moving to CAD rather than pattern making and 2D drawing, Scalextric was rapidly accelerating towards the 21st century.

$57.99

View this Car

 

Scalextric C3828A 60th Anniversary no. 3-1980s, Audi Sport quattro S1 E2 Limited Ed.

Scalextric 60th Anniversary Collection – 1980s, Audi Sport quattro S1 E2 Limited Edition

First issued in 1984 the original Scalextric Audi Quattro proved to be as big a hit on the Scalextric tracks of the nation as the original had been screaming through Scandinavian forests. The 1980s saw Scalextric move into ever more inventive areas, with items such as ‘Blowout!’ and Racing Rigs bringing new excitement to the brand. Group B rally cars featured heavily as Ayrton Senna made his Scalextric debut towards the end of the decade in a JPS Lotus, alongside Mansell in a Williams.

The Audi Sport quattro S1 E2 itself was introduced at the end of the 1985 as an update to the Audi Sport quattro; with the car sporting an inline turbo charged 5-cylinder engine. In addition to the improved power output, an aggressive aerodynamic kit was added that featured very distinctive wings and spoilers to the front and rear of the car to increase downforce. The S1 E2 did find some success with Walter Röhrl and Christian Geistdörfer winning the 1985 San Remo Rally, but with the Group B era coming to an end in 1986 after a series of tragic incidents, the quattro was consigned first to the Rallycross tracks, and then the history books.

$57.99

View this Car

 

Scalextric C3830A 60th Anniversary Collection car No. 2,2000s, Aston Martin DBR9 Ltd. Ed. (C)

Scalextric 60th Anniversary Collection – Car No. 2, 2000s, Aston Martin DBR9 Limited Edition

The Aston Martin DBR9 is a racing car built by Aston Martin Racing, debuting in 2005 and appearing frequently in international sportscar racing until the end of the GT1 category in 2011. The car is most famous for taking two LMGT1 class wins at Le Mans 24 Hours in 2007 and 2008 with the Aston Martin Racing factory team.

Collect all seven cars in the Scalextric 60th Anniversary Collection, to be released throughout 2017. This is second releae. The first car is the Scalextric C3831 Anniversary Collection Car No.1 – 2010s, Bentley Continental GT3

$59.95

View this Car

 

Scalextric C3831A Anniversary Collection Car No.1 – 2010s, Bentley Continental GT3 (C)

Scalextric C3831A Anniversary Collection Car No.1 – 2010s, Bentley Continental GT3

As Scalextric entered the second decade of the 21st century it has continued to bring technological advances to the slot racing arena. Following Digital has come ARC; a race management system that allows the user to wirelessly manage all elements of the ‘Scalextric race experience’ using Bluetooth technology via a tablet or smart device. ARC seamlessly merges the excitement of real-time slot racing, with the thrill of on screen gameplay.

The Bentley Continental GT3 is just one of many GT3 race cars now offered by Scalextric. Making its competitive debut at the 2013 Gulf 12 Hours in Abu Dhabi on 13th December 2013, many scoffed that a car the size of the Continental would be successful but it has proved to bean amazing car, powerful and well handling it is still one of the best cars in its class. The Abu Dhabi race would mark Bentleys return to motorsport ten years after its dominant win at the 24 Hours of Le Mans in 2003 and as of now the car continues to win in the Blancpain GT sprint and Endurance series, British GT, GT Cup and on many Scalextric layouts across the world.

This is the first car in the 60th Anniveary series. The second car is Scalextric C3830A 60th Anniversary Collection Car no.2- 2000s, Aston Martin DBR9 Limited Edition

$59.95

View this Car

The best replacement or scratcbuilder chassis, the HRS/2 from Slot.it, is now available with an anglewinder pod and motor.

 

SICH312C HRS/2, Chassis, RTR, Anglewinder 1.0mm Offset

SICH312C HRS/2, Chassis, RTR, Anglewinder 1.0mm Offset

$52.99

View this Item

The out-of-sight VW Bug “Group 5″ is available now.

 

Carrera 27557 VW Käfer “Group 5″ Race 4 “BUG” image in gold

Carrera 27557 VW Käfer “Group 5″ Race 4 “BUG” image in gold

Cult Beetle

The VW Beetle “Group 5″ Race 4 of Beetle Union Germany brings a really culty atmosphere to the streets. The stunning paintwork features a nicotine-free version of probably the best-known paint job in the whole of motor racing. The 1:32 scale analogue Carrera EVOLUTION VW Käfer “Group 5″ Race 4 slotcar is an impressive, faithfully detailed reproduction. A separate digital decoder allows this Carrera car to be refitted for digital racing. Belt up, put your foot down and enjoy it!

$36.99

View this Car

The race season has arrived with 11 new bargain-price Carrera 1/43 scale Go!!! cars in both analog and digital.

 

Carrera 64082 Disney.Pixar Cars 3 – Lightning McQueen

Carrera 64082 Disney.Pixar Cars 3 – Lightning McQueen

In summer 2017, Lightning McQueen will be taking over the big screen for the third time in the new “Disney/Pixar Cars 3″ film – and there’s no way he’d miss out on the chance to make another appearance on the Carrera track at the same time!

$17.49

View this Car

 

Carrera 64083 Disney.Pixar Cars 3 – Cruz Ramirez – Racing

Carrera 64083 Disney.Pixar Cars 3 – Cruz Ramirez – Racing

Feisty Cruz Ramirez celebrates her debut in “Disney/Pixar Cars 3″ as the faithful companion of the familiar hero, Lightning McQueen. In the duel on the Carrera racing track, however, she gives her all to ensure that she finishes in front!

$17.49

View this Car

 

Carrera 64084 Disney.Pixar Cars 3 – Jackson Storm

Carrera 64084 Disney.Pixar Cars 3 – Jackson Storm

In the new “Disney/Pixar Cars 3″ movie, Jackson Storm, wants to knock the hero, Lightning McQueen, off the podium – but does he have what it takes to triumph on the Carrera race track as well?

$17.49

View this Car

 

Carrera 64086 Ferrari SF16-H “S.Vettel, No.5″

Carrera 64086 Ferrari SF16-H “S.Vettel, No.5″

Four-time world champion, Sebastian Vettel, blasts through the corners in his new Ferrari SF16-H “S.Vettel, No.5″ in the battle for the Formula 1 title. This car, developed from its predecessor, differs mainly in the nose cone area – but yields nothing in terms of power or dynamics.

$17.49

View this Car

 

Carrera 64087 Red Bull Racing TAG Heuer RB “M.Verstappen, No.33″

Carrera 64087 Red Bull Racing TAG Heuer RB “M.Verstappen, No.33″

The Red Bull RB12 took Max Verstappen to fifth place in the overall rankings – will he make it to the podium in the Carrera duel?

$17.49

View this Car

 

Carrera 64088 Mercedes F1 W07 Hybrid “L.Hamilton, No.44″

Carrera 64088 Mercedes F1 W07 Hybrid “L.Hamilton, No.44

The Mercedes F1 W05 Hybrid took Lewis Hamilton to one of his two Formula 1 world titles, as well as second place in the 2016 season. This is a car that’s tuned for success!

$17.49

View this Car

 

Carrera 64089 BMW M4 DTM “M.Wittmann, No. 11″

Carrera 64089 BMW M4 DTM “M.Wittmann, No. 11″

In the DTM German Touring Car Championship, Red Bull gives Marco Wittmann’s BMW wings, and the BMW M4 DTM “M.Wittmann, No.11″ took him to overall victory in 2016.

$17.49

View this Car

 

Carrera 64090 Teufel Audi RS 5 DTM “M.Molina, No.17″

Carrera 64090 Teufel Audi RS 5 DTM “M.Molina, No.17″

Miguel Molina is devilishly rapid on the track in his Teufel Audi R5 DTM “M.Molina, No.17″. With so much power, his opponents will have to get used to seeing the back of this red race car.

$17.49

View this Car

 

Carrera 41395 Audi R8 V10 Plus (blue) Digital 143

Carrera 41395 Audi R8 V10 Plus (blue) Digital 143

The 610 hp Audi R8 V10 Plus loves to sprint and does 0 to 100 km/h / 62 mph in a mere 3.2 seconds, while its matt midnight blue exterior exudes an aura of respect. The 1:43 scale Carrera GO!!! Audi R8 V10 Plus Slotcar blue is a thrilling, faithfully detailed reproduction. This Carrera car is perfect for introducing children of 6 years and upwards to the fascinating Carrera Racing World!

$34.99

View this Car

 

Carrera 41396 BMW M4 DTM “M.Wittmann, No.11″ Digital 143

Carrera Go!! 41396 BMW M4 DTM “M.Wittmann, No.11″ Digital 143

The Red Bull colours brought Mario Wittmann luck in the 2016 DTM season, propelling him to overall victory. The BMW M4 DTM “M.Wittmann, No.11″ is also on course for a successful racing career on the Carrera tracks.

$34.99

View this Car

 

Carrera 41397 Teufel Audi RS 5 DTM “M.Molina, No.17″ Digital 143

Carrera 41397 Teufel Audi RS 5 DTM “M.Molina, No.17″ Digital 143

The name says it all: the Teufel Audi RS5 DTM “M. Molina, No.17″ with its devilish livery is as infernally powerful on the Carrera racetrack as in the German touring car championship.

$34.99

View this Car

Pre-order

New Cars Coming Soon

The next Policar Replica of the Lotus 72 will recreate the cars with the Lucky Strike livery. Wild! And you can pre-order yours now..

 

PCCAR02E Lotus 72 Lucky Strike 1972 Brands Hatch, driver Dave Charlton—PRE-ORDER NOW!

PCCAR02E Lotus 72 Lucky Strike 1972 Brands Hatch, driver Dave Charlton

$64.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:
support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B
El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter September 7th, 2017

September 10, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

We found a few of these out-of-production Ninco cars and have them at a very special price for one week only. Limit one to a customer.

 

Ninco 55057 Camaro, Momentum Motorsports (C)

1/32 scale slot car. Camaro GT car raced in the Continental Tire series. Usual NINCO 1 mechanics, NC-11 motor, No interior makes it easy for digitalization. Great looking and running car for any home 1/32 track.

$54.99 $39.95

Save: 27% off

View this Car

Pre-order

New Cars Coming Soon

The Thunder Slot Can-Am Lola T70 roadsters are due in a week so pre-order yours now.

 

Thunder Slot THCA00201 LOLA T70 CAN AM Dan Gurney #30—PRE-ORDER NOW!

Thunder Slot 1/32 Analog RTR – LOLA T70 CAN AM Dan Gurney #30

Features : Triangular suspension type motor pod, adjustable front axle ride height, optional independant rotating front axles, optional traction magnet, super sticky rear tires, aluminum rear wheels, plastic front wheels, heat treated axles, bronze bushings, ultra smooth plastic pinion and setscrew plastic axle gear, T6 Torx Chassis to Body Screws, 21.500 rpm short can motor mounted at a 2.5 degree angle, adjustable body mounts

$102.99

View this Car

 

Thunder Slot THCA00202 LOLA T70 CAN AM DANA Peter Revson #52—PRE-ORDER NOW!

Thunder Slot 1/32 Analog RTR – LOLA T70 CAN AM DANA Peter Revson #52

Features : Triangular suspension type motor pod, adjustable front axle ride height, optional independant rotating front axles, optional traction magnet, super sticky rear tires, aluminum rear wheels, plastic front wheels, heat treated axles, bronze bushings, ultra smooth plastic pinion and setscrew plastic axle gear, T6 Torx Chassis to Body Screws, 21.500 rpm short can motor mounted at a 2.5 degree angle, adjustable body mounts

$102.99

View this Car

Create your own Can-Am Lola T70 with this unpainted white Thunder Slot kit that is also due soon so you can pre-order it now.

 

Thunderslot THCA002K Lola T70 CAN AM White Kit – Gurney or Revson—PRE-ORDER NOW!

Features : Triangular suspension type motor pod, adjustable front axle ride height, optional independant rotating front axles, optional traction magnet, super sticky rear tires, aluminum rear wheels, plastic front wheels, heat treated axles, bronze bushings, ultra smooth plastic pinion and setscrew plastic axle gear, T6 Torx Chassis to Body Screws (drivers below), 21,500 rpm short can motor mounted at a 2.5 degree angle, adjustable body mounts

$87.99

View this Car

These three new Slot.it cars are due late fall but the supply will be limited so pre-order yours now. The Lola B12/80 and Audi R18 are completely new bodies to increase your options for modern LMP cars to compete against the other Audis.

 

Slot It SICA39a Lola B12/80 – #31 – 24h Le Mans 2012—PRE-ORDER NOW!

Slot.it SICA39a Lola B12/80 – #31 – 24h Le Mans 2012

The Lola B12/80 is a completely new body to increase your options for modern LMP cars to compete against the Audis.

$69.99

View this Car

 

Slot It SICA33b Audi R8 LMP – #4 – 24h Le Mans 2001 ‘Gulf’—PRE-ORDER NOW!

Slot.it SICA33b Audi R8 LMP – #4 – 24h Le Mans 2001 ‘Gulf’

$69.99

View this Car

 

Slot It SICA38A Audi R18, n.4 3rd Le Mans 2012-PRE-ORDER NOW!

Slot It SICA38A Audi R18, n.4 3rd Le Mans 2012

$69.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter August 17th, 2017

August 20, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

Slot Mods Does It Again!

Our friends over at Slot Mods have made a Laguna Seca replica that’s huge, a full 25-by-25 feet and 105 feet long, to be exact (yes, that says 125 feet!). Best part? Anybody is welcome to try the replica version of the famous track.

Read More

These Slot.it Ferraris are hard to find but we located a few of the easy-to-assemble kits and have them at a very special price for just one week. One to a customer. No dealers.

Slot It SIKF02 Ferrari 312PB KIT, #86, Peterson / Schenken, 1972 (C)

1/32 scale slot car kit. This is an easy-to-assemble kit with prepainted body.

$49.99 $34.95

Save: 30% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

Two of the Sebring 2016 GT Porsche 911 racers are here from Scale Auto so you can order yours now.

Scale Auto SC6150R Porsche 991 RSR Sebring 2014 #911

Scale Auto SC6150R Porsche 991 RSR Sebring 2014 #911. Dnf GTLM, drivers Tandy/Estre

Anglewinder pod chassis

$64.99

View this Car

Scale Auto SC6151R Porsche 991 RSR Sebring 2014 #912

Scale Auto SC6151R Porsche 991 RSR Sebring 2014 #912, 3rd GTLM, 13th OA, drivers Bamber/Christens

Anglewinder pod chassis

$64.99

View this Car

Slot.it produced a handful of these Alfa Romeo 33/3 cars in white rather than red as Limited Edition models. We found the last few so you can buy yours now.

Slot It SISC11A Alfa Romeo 33/3, no.8 ‘CINZANO’-WHITE Special Collector Edition

Slot It SISC11A Alfa Romeo 33/3, no.8 ‘CINZANO’-WHITE Special Collector Edition

Slot.it produced a few of these Alfa Romeos with white rather than red bodies for collectors..

$74.99

View this Car

Pre-order

New Cars Coming Soon

Two new ’68 Trans-Am Camaros are on their way from Pioneer. We are only expecting a few so place your pre-order now.

Pioneer P044 Team Chevy Camaro, Green #14,‘12hr Enduro Racer’—PRE-ORDER NOW!

P044 Team Chevy Camaro, Green #14,‘12hr Enduro Racer’

18K Typhoon motor, sidewinder configuration

Detailed Race interior

QuickChange braids

Scalextric Digital DPR ready

$74.99

View this Car

Pioneer P045 Team Chevy Camaro, Blue #15,‘12hr Enduro—PRE-ORDER NOW!

Pioneer P045 Team Chevy Camaro, Blue #15,‘12hr Enduro

18K Typhoon motor, sidewinder configuration

Detailed Race interior

QuickChange braids

Scalextric Digital DPR ready

$74.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter August 10th, 2017

August 13, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

 

Pump up your Trans-Am racing series with this Mustang and Camaro at super sale prices for only one week. One to a customer. No dealers.


Scalextric C2890 1969 Mustang TransAm, Al Costner (C)

1/32 scale slot car. Ready to run on all 1/32 scale non-digital slot car tracks.1/32 scale slot car, ready to run on all 1/32 and 1/24 scale non-digital slot car tracks. This car was driven in the day by independent Al Costner. It remains active in historic racing, driven by its present owner, Gordon Gimbel of Roseville, CA.

Features:
Adjustable magnatraction positions.
Magnatraction
Quick change braid plate.

Dimensions & Configuration
Car: Overall length 147 mm, Wheelbase 85 mm, Weight 95 gm
Rear: Axle width 54 mm, Tyre diameter 20 mm, Width 8 mm
Front: Axle width 54 mm, Tyre diameter 19 mm, Width 8 mm
Magnet: Rectangular 2.5 mm, Gear ratio 11:36
Motor: Sidewinder, Rear Mounted, Rear Drive, Mabuchi FC130 18k rpm

$49.99 $39.95
Save: 20% off

View this Car


Scalextric C3001 1970 Camaro, Warren Agor (C)

1/32 scale slot car. Ready to run on all 1/32 scale non-digital slot car tracks. Digital plug ready. Accepts C8515 plug-in digital chip. 1970 Camaro #13, as driven by Warren Agor. This car is believed to be the third Chaparral factory team car that Chevrolet gave Jim Hall to build into a race car.

After leaving the Penske Racing team in 1968, Warren Agor formed Agor Racing Enterprises. As a race car owner, builder, and driver he set many track records and won numerous SCCA and IMSA races including the 25th Trans-Am race victory for the Chevrolet Camaro at Sanair International raceway in Canada (the only race track in the world with a name that sounds like the naming rights have been bought by a garbage collection company or a room deodorizer manufacturer). Agor, of Rochester, New York, bought the car from Marshall Robbins in late 1971. He changed the color to Hugger Orange and the number to 13. Hoselton Chevrolet sponsored the car for the three years that Agor drove it. At the time of his retirement from racing in 1973, he had accumulated more points than any then-active professional driver participating in the Trans-Am series. Agor now runs a company providing mobility solutions for the disabled.

Best Finishes for Warren Agor
1972 Lime Rock, 2nd: Bryar, 3rd: Mid-Ohio, 3rd
1973 Daytona, 2nd: Sanair, 1st: Road America, 2nd Fastest Trans-Am lap record of 2.25, 99 mph, which was held into the ‘80’s

$49.99 $39.95
Save: 20% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

Slot car racers have adopted the British Touring Car Series as a very suitable substitute for the NASCAR cars that have not been produced for years. Two of the most successful BTCC cars are in this new set complete with track, controllers and power supply so you can start your own BTCC series today.


Scalextric C1372 British Touring Car Battle Set

Scalextric C1372 British Touring Car Battle

75 x 52 inch area, 190 inch lap length

Having begun in 1958 the British Touring Car Championship (BTCC) continues to draw crowds with high octane racing, passionate fans and iconic cars!

Now you can bring the thrills and spills of the BTCC into your living room and recreate all the drama and fun at home.

Features Include:
Lap counter
4 multiple track layots
Speed limiter hand controllers
Super resistant cars
Magnatraction
Easy change pick-ups
Digital plug ready

Contents:
BTCC BMW 125 Jack Goff
BTCC Honda Civic Gorden Shedden
Powerbase straight
Lap counter straight
6 x Radius 2 90° curve
4 x Radius 2 45° curve
2 x Track support
2 x Colour coded hand controllers
4 x Braid plates
TransformerSet

$124.99

View this Car

The third and fourth cars in the Limited Edition Scalextric 60th Anniversary series are here. They only made a few, so order yours now.


Scalextric C3828A 60th Anniversary no. 3-1980s, Audi Sport quattro S1 E2 Limited Ed.

Scalextric 60th Anniversary Collection – 1980s, Audi Sport quattro S1 E2 Limited Edition First issued in 1984 the original Scalextric Audi Quattro proved to be as big a hit on the Scalextric tracks of the nation as the original had been screaming through Scandinavian forests. The 1980s saw Scalextric move into ever more inventive areas, with items such as ‘Blowout!’ and Racing Rigs bringing new excitement to the brand. Group B rally cars featured heavily as Ayrton Senna made his Scalextric debut towards the end of the decade in a JPS Lotus, alongside Mansell in a Williams.

The Audi Sport quattro S1 E2 itself was introduced at the end of the 1985 as an update to the Audi Sport quattro; with the car sporting an inline turbo charged 5-cylinder engine. In addition to the improved power output, an aggressive aerodynamic kit was added that featured very distinctive wings and spoilers to the front and rear of the car to increase downforce. The S1 E2 did find some success with Walter Röhrl and Christian Geistdörfer winning the 1985 San Remo Rally, but with the Group B era coming to an end in 1986 after a series of tragic incidents, the quattro was consigned first to the Rallycross tracks, and then the history books.

$57.99

View this Car


Scalextric C3829A 60th Anniversary Collection no.4-1990s, BMW E30 M3 Limited Ed.

Scalextric C3829A 60th Anniversary Collection – 1990s, BMW E30 M3 Limited Edition

As Scalextric moved into the 1990s it followed another shift in motorsport. Throughout the 1980s rallying and Group B had dominated the airwaves and press, but as that declined, touring car racing, most notably Super Touring, took its place. As the BTCC, DTM and other national series gained in popularity, Scalextric began producing these cars.

One manufacturer above others dominated this form of motorsport, BMW. Although production of the BMW M3 E30 started in the ‘80s it saw considerable success in the early ‘90s, winning the BTCC title in 1990 and 1991, along with numerous DTM, Italia Superturismo Championships and Australian races. It also enjoyed considerable success in the rally category.

As the decade moved on, the BMW M3 E30 was to be found racing in lesser series and is even now a common club racing saloon car; as well as being an icon all other performance saloons aspire to. Other new items introduced in the ‘90s by Scalextric were the horse racing sets, as well as various cars driven by the greats of the era: Senna, Schumacher and Hill, all immortalised by Scalextric. With design moving to CAD rather than pattern making and 2D drawing, Scalextric was rapidly accelerating towards the 21st century.

$57.99

View this Car

Four more slot cars from the 2017 Scalextric line are here now, including the cartoon deco VW Campervan.


Scalextric C3891 Volkswagen Campervan

To ferry parts across the massive VW factory, stripped down Beetles were turned into “transporters”. Ben Pon, a Dutch VW importer, thought this was a great idea and in 1947 sketched his idea of a Beetle based van. Two years later it was launched at the Geneva Motor Show as the modern equivalent to the horse and cart.

$49.99

View this Car


Scalextric C3726 Chevrolet Corvette Stingray L88 no. 21

Purpose built for competition, complete with 560-horsepower, the awe-inspiring Chevrolet Corvette L88 has brought the competition to its knees in both international and domestic GT racing from Sebring to Le Mans. The final year of production saw 116 L88’s buily one of which being the famous 1969 L88 convertible which is still the only COPO version in known existence. This iconic car was originally owned by Ricky Thompkins and has now been restored to its original racing spec, including livery.

$49.99

View this Car


Scalextric C3836 Team Super Kart

Scalextric C3836 Team Super Kart

$29.99

View this Car


Scalextric C3877 McLaren P1, Grey

The McLaren P1 is a limited production plug-in hybrid sports car by British manufacturer McLaren Automotive. The concept car debuted at the 2012 Paris Motor Show. Deliveries to retail customers began in the UK in October 2013. The entire P1 production of 375 units was sold out by November 2013. The production run ended in December 2015. It is considered to be the long-awaited successor to the McLaren F1, utilizing hybrid power and Formula 1 technology. It does not have the same three seat layout as its predecessor. The design of the headlights is very similar to the shape of the McLaren logo. Just like the McLaren F1 road car of 1992, the McLaren P1 is a mid-engine, rear-wheel drive design that uses a carbon fibre monocoque and roof structure safety cage concept called MonoCage, which is a development of the MonoCell used in the current MP4-12C and MP4-12C Spider upgrade that came out in early 2012.

$49.99

View this Car

Three new 1/43 scale Go!!! race car sets from Carrera, including the first two sets with the star cars from the newest Cars 3 movie, for your favorite child. All are at priced to make it easier to get started racing now.


Carrera 62418 Disney/Pixar Cars 3 – Finish First! 1/43 scale set

16.1-foot lap length, 5.2 x 2.2-foot area. On the way to victory Lightning McQueen doesn’t just do breath-taking tricks and scary overtaking manoeuvres in the film – he does them all over this 5-metre/16.40 ft. Carrera GO!!! racetrack too. There are plenty of opportunities to squeeze out top performances out of his speed machine on the high speed straights, risky junctions and tough bends. To be the fastest on this track there’s no room for mistakes. Never-ending driving thrills, action and great stunts are bound to be enjoyed here.

$102.99

View this Set


Carrera 62419 Disney/Pixar Cars 3 – Fast Friends 1/43 scale set

16.4-foot lap length, 7.0 x 3.2-foot area. The showdown This 4.9-metre/16.07 ft. Carrera GO!!! racing circuit is one never-ending adrenaline kick. Lightning McQueen, the star of the Disney/Pixar Cars films, guarantees amazing racing action – right around the track. The showdown comes to a head on high speed straights, daring loops and a breath-taking fly-over. The racetrack offers everything you could wish for when staging highly charged face-offs. Now it’s all a question of skill. This is no challenge for amateurs!

$97.99

View this Set


Carrera 62423 DTM Touring Contest 1/43 scale set

29.2-foot lap length, 7.2 x 3.2-foot area. Ultimate adrenaline! Trainee racers can cut their teeth on this 8.9-metre/29.19 ft. Carrera GO!!! motor racing circuit. Two loops, tight bends and high speed straights are a challenge for every driver. The Red Bull branded BMW and the Teufel Audi RS 5 lock horns in a bitter struggle. It’s all about shaking off your rival without allowing concentration levels to drop. Thrilling speeds and manoeuvres help to determine who emerges victorious from the ultimate race. A genuine must-have for those who love the ultimate adrenaline kick and top speeds.

$107.99

View this Set

The motors that are fitted to the super-quick Policar Lotus and March Formula 1 cars are now available as separate items so you can fit them to other brands with the FF-size motor.


PMX01 Motor, 25k-Max 24,500 rpm Policar FI Stock Motor

PMX01 Motor, 25k-Max 24,500 rpm Policar FI Stock Motor

$17.99

View this Item

All six of the Gulf Team mechanics and driver Jackie Ickx are here to populate your pit scenes. Each is hand-painted cast resin.


FLM132020 Jacky Ickx.

There is no more famous endurance racing driver than Jacky Ickx. With 6 LeMans victories he is a legendary figure in motorsports history. He is modeled here as he looked when he won his first LeMans victory in 1969. Yes, we know that’s not the correct car for the occasion and yes, we know his name is properly spelled “Jacky”, not “Jackie”, and so does LMM. He was wearing a driving unifom on which the name had been embriodered incorrectly… so don’t e-mail us.

$10.99

View this Item


FLM132021 Team Gulf 1960s Mechanic Pierre

FLM132021 Team Gulf 1960s Mechanic Pierre

$12.99

View this Item


FLM132022 Paul, Gulf team member figure

1/32 scale figure. 60s era team member. Easily repainted in the colors of just about any racing team.

$12.99

View this Item


FLM132023 Team Gulf 1960s Mechanic Jacques

FLM132023 Team Gulf 1960s Mechanic Jacques

$12.99

View this Item


FLM132024 Team Gulf 1960s Mechanic Henri

FLM132024 Team Gulf 1960s Mechanic Henri

$12.99

View this Item


FLM132025 Team Gulf 1960s Mechanic Philippe

FLM132025 Team Gulf 1960s Mechanic Philippe

$12.99

View this Item


FLM132026 Philippe, Gulf team member figure

1/32 scale figure. 60s era team member. Easily repainted in the colors of just about any racing team. In the off season Philippe supplements his income by playing Cyrano deBrergerac in a touring theater company. He’s also auditioned for the role of Tony Kanaan in an upcoming racing movie.

$12.99

View this Item

These three super-fast NSR cars are in stock now.


NSR NSR0052AW Corvette C7R White Kit

NSR 1/32 Analog Chevrolet Corvette C7R White Kit – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO 2 Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods

$73.99

View this Item


NSR NSR0040SW Abarth 500 Trofeo Selenia #7

NSR 1/32 Analog RTR Abarth 500 Trofeo Selenia #7 – Adjustable front axle ride height – Sidewinder Sark 20,000 RPM Motor – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Adjustable suspension type motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Clear Coat Finish for maximum durability and high gloss – Includes the EVO Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods

$89.99

View this Car


NSR NSR0039AW Audi R8 Ebrahim Motors 2013 #20

NSR 1/32 Analog RTR AUDI R8 Audi R8 Ebrahim Motors Brazilian GT Championship 2013 #20 – Includes : Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Lightweight drilled aluminum setscrew wheels all around – All metal setscrew mount super smooth gearing – Heat treated axles – Machined bronze self lubricating bushings – Adjustable suspension motor pod – Anglewinder balanced King Motor with 21,400 RPM & 350 g-cm Torque “Magnetic Effect” – Clear coat finish over top of paint for best durability & high gloss

$89.99

View this Car

These Sloting Plus wheels are one-piece cast and machined aluminum replicas. The NSR wheel/tire sets are glued and trued and ready to race.


NSR NSR9033 3/32 Ultimate Race Tire 19.5×10.5mm Trued Ultragrip

NSR Ultimate Race Tire 19×10.5mm Trued NSR5270 Ultragrip rubber on NSR5010 wheels

$25.99

View this Item


NSR NSR9034 3/32 Ultimate Race Tire 19.5×10.5mm Trued Supergrip

NSR Ultimate Race Tire 19×10.5mm Trued NSR5270 Supergrip rubber on NSR5010 wheels

$25.99

View this Item


Sloting Plus SP024216 “America R 16″ wheels – 3/32″ axles 15.9mm x 8.5mm

Sloting Plus “America R 16″ Duraluminium wheels – for 3/32″ (2.37mm) axles 15.9mm x 8.5mm – Ultra light 1.05g – M2.5 setscrews for larger hex size to prevent stripping of hex wrench – 0.050″ Allen driver needed to install – 2 wheels per package with setscrews

$14.99

View this Item


Sloting Plus SP024220 “America R 17″ wheels – 3/32″ axles 16.9mm x 10mm

Sloting Plus “America R 17″ Duraluminium wheels – for 3/32″ (2.37mm) axles 16.9mm x 10mm – Ultra light 1.2g – M2.5 setscrews for larger hex size to prevent stripping of hex wrench – 0.050″ Allen driver needed to install – 2 wheels per package with setscrews

$14.99

View this Item


Sloting Plus SP024222 BBS Pattern wheels – 3/32″ axle 15.9 x 8.5mm

Sloting Plus BBS Pattern wheels for 3/32″ (2.37mm) axle – 15.9 diameter x 8.5mm rim width – aluminum / magnesium alloy – light weight 1.1g with setscrew – M2.5 setscrews for larger hex size to prevent stripping of hex wrench sometimes an issue with M2 size setscrews – Uses a 0.050″ Allen driver to install – 2 wheels / package with setscrews

$14.99

View this Item


Sloting Plus SP024226 BBS Pattern wheels – 3/32″ axle 16.9 x 10mm

Sloting Plus BBS Pattern wheels for 3/32″ (2.37mm) axle – 16.9 diameter x 10mm rim width – aluminum / magnesium alloy – light weight 1.2g with setscrew – M2.5 setscrews for larger hex size to prevent stripping of hex wrench sometimes an issue with M2 size setscrews – Uses a 0.050″ Allen driver to install – 2 wheels / package with setscrews

$14.99

View this Item


Sloting Plus SP158004 Nylon M2 x 4mm Screws Phillips Drive x 20

Sloting Plus Nylon M2 x 4mm Screws Phillips Drive Machine Screws – 0.025g each – 20 screws / package

$3.39

View this Item


Sloting Plus SP158012 Nylon M2 x 12mm Screws Phillips Drive x 20

Sloting Plus Nylon M2 x 12mm Screws Phillips Drive Machine Screws – 0.025g each – 20 screws / package

$3.39

View this Item

New Sloting Plus super-strong printed ABS chassis are in stock no so you can upgrade the performance of these cars with motor pods.


Sloting Plus SP600011EVO 3D Printed Chassis Spirit Peugeot 406 Silhouette

Sloting Plus 3D Printed Chassis for Spirit Peugeot 406 Silhouett – For use with Slot.it Motor pods – Approximate weight 10.5g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

View this Item


Sloting Plus SP600015EVO 3D Printed Chassis Ninco Ferrari 360 GTC

Sloting Plus 3D Printed Chassis for Ninco Ferrari 360 GTC – For use with Slot.it Motor pods – Approximate weight 10.4g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

View this Item


Sloting Plus SP600016EVO 3D Printed Chassis Ninco Ford GT

Sloting Plus 3D Printed Chassis for Ninco Ford GT – For use with Slot.it Motor pods – Approximate weight 10.6g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

View this Item


Sloting Plus SP600018EVO 3D Printed Chassis Ninco Mosler MT900

Sloting Plus 3D Printed Chassis for Ninco Mosler MT900 – For use with Slot.it Motor pods – Approximate weight 11.2g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

View this Item


Sloting Plus SP600029EVO 3D Printed Chassis Sloting Plus Reynard 2KQ

Sloting Plus 3D Printed Chassis for Sloting Plus Reynard 2KQ – For use with Slot.it Motor pods – Approximate weight 11.4g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

View this Item


Sloting Plus SP600031EVO 3D Printed Chassis NSR Mosler MT900

Sloting Plus 3D Printed Chassis for NSR Mosler MT900 – For use with Slot.it Motor pods – Approximate weight 11.4g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

View this Item


Sloting Plus SP600033 EVO 3D Printed Chassis Scalextric McLaren MP4-12C GT3

Sloting Plus 3D Printed Chassis for Scalextric McLaren MP4-12C GT3 – For use with Slot.it Motor pods – Approximate weight 11.4g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

View this Item


Sloting Plus SP600036EVO 3D Printed Chassis Scalextric Audi R8 GT3

Sloting Plus 3D Printed Chassis for Scalextric Audi R8 GT3 – For use with Slot.it Motor pods – Approximate weight 11.4g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

View this Item


Sloting Plus SP600045EVO 3D Printed Chassis Ninco Mercedes SLS GT3

Sloting Plus 3D Printed Chassis for Scalextric Audi R8 GT3 – For use with Slot.it Motor pods – Approximate weight 11.4g – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$19.99

View this Item


Sloting Plus SP601002EVO 3D Printed Chassis Chassis Scalextric VW Polo WRC

Sloting Plus 3D Printed Chassis for Chassis Scalextric VW Polo WRC – Includes a Lexan cockpit insert & special mounting screws and a 3D printed “support plate” to hold the interior in place – For use with Slot.it Motor pods – Includes Adjustable front axle ride height – This new chassis is much more flexible than the previous one and 10 times more resistant to breakage thanks to new ABS plastic that is used in the manufacture. Improved rear bushing mounting system also is incorporated.

$26.99

View this Item

Pre-order

New Cars Coming Soon

Slot.it has announced a new Porsche 962C, the car that won Le Mans in 1987, to be shipped in early 2018. We have a very limited supply of the Slot.it replicas of the Porsches that won Le Mans in 1986 (Slot It SICW04) and 1985 (Slot It SICW07) so you can complete the set of winners. You can also pre-order the 1987 winner now.


Slot.It SICW20 Porsche 962C no. 17 Le Mans Winner 1987, drivers: H.J. Stuck, D. Bell, A. Holbert—PRE-ORDER NOW!

Slot.It SICW20 Porsche 962C no. 17 Le Mans Winner 1987, drivers: H.J. Stuck, D. Bell, A. Holbert—PRE-ORDER NOW!

$69.99  

View this Car

NSR is producing a new version of the popular Mosler MT900R. There are four part numbers, each with the same body, so you can pre-order the car with the chassis that works best for you.


NSR NSR0042AW Mosler MT900R EVO3 #24 Daytona 2002 Anglewinder—PRE-ORDER NOW!

NSR 1/32 Analog RTR Mosler MT900R EVO3 #24 Daytona 2002 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss

$89.99  

View this Car


NSR NSR0042IL Mosler MT900R EVO3 #24 Daytona 2002 INLINE—PRE-ORDER NOW!

NSR 1/32 Analog RTR Mosler MT900R EVO3 #24 Daytona 2002 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – INLINE Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss

$89.99  

View this Car


NSR NSR0043AW Mosler MT900R EVO5 #24 Daytona 2002,A/W Triangular pod—PRE-ORDER NOW!

NSR 1/32 Analog RTR Mosler MT900R EVO5 #24 Daytona 2002 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – ANGLEWINDER Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable TRIANGULAR suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO 5 Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods

$89.99  

View this Car


NSR NSR0043IL Mosler MT900R EVO5 #24 Daytona 2002,INLINE,triangular pod—PRE-ORDER NOW!

NSR 1/32 Analog RTR Mosler MT900R EVO5 #24 Daytona 2002 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – INLINE Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable TRIANGULAR suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO 5 Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods

$89.99  

View this Car

NSR is also shipping a new Porsche and a white C7.R ‘Vette body in late September so you can pre-order now.


NSR NSR0035AW Porsche 997 Matmut # 76 24h LeMans 2007—PRE-ORDER NOW!

NSR 1/32 Analog RTR Porsche 997 Matmut # 76 24h LeMans 2007 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods

$89.99  

View this Car


NSR NSR1498 Corvette C7R White Body Kit—PRE-ORDER NOW!

NSR NSR1498 Corvette C7R White Body Kit

$34.99  

View this Item

Scalextric has finalized the paint scheme on the seventh (and final) car in their 60th anniversary series. You’ll want them all (the C3826A E-Type Jaguar and C3827A Lancia Stratos are also coming this fall) and this 250F Maserati is likely to be the most desirable because it is (by chance) painted in the official United States of America blue on white racing colors. It is due in October so you can pre-order it now.


Scalextric C3825A 60th Anniversary Collection – 1950s, Maserati 250F Limited Edition—PRE-ORDER NOW

Scalextric 60th Anniversary Collection – 1950s, Maserati 250F Limited Edition

Launched in 1957, Scalextric was the brain child of Bertram ‘Fred’ Francis, the talented inventor behind a range of mechanical tin toys. The first Scalextric cars were tin too and powered by a small electric motor, instead of the more common clockwork cars of the time. This new toy took off and by 1958 Francis had sold his idea to Tri-ang, who looked to invest. Tri-ang produced newer cars in plastic and the range of vehicles offered started to expand.

The very first car released by Scalextric in 1957 was the Maserati 250F, then the car to have in Grand Prix racing with Juan Manuel Fangio scoring his legendary final win in one at the 1957 German Grand Prix. In this race he overcome a 48 second deficit in just 22 laps and broke the lap record 10 times in one race. The very first Scalextric set featured two of these cars and perfectly captured both the glamour and beauty of motor racing cars of the period. The 250F was phased out of F1 racing shortly afterwards, but remains one of the most iconic and beautiful F1 cars of all time, a shining testament to the bravery of the early F1 World Championship competitors.

$57.99  

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter August 3rd, 2017

August 6, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

These Lotus GT cars are out-of-production but we found a few and have them at a very special price for a limited time. Only one to a customer. No dealers.

 

Scalextric C3379 Lotus Evora #48 Petronas (C)

1/32 scale slot car, ready to run on all 1/32 scale non-digital tracks. Digital plug ready. Accepts C8515 plug-in digital chip. British GT 2012. Drivers: Bolisetti and Glew.

Scalextric Special Features:

Digital Plug Ready

Easy Change Pick-ups

Magnatraction

Super Resistant

Motor: FC130 endbell drive.

$44.99 $29.95

Save: 33% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

The historic Reposol livery marks the newest Slot.it Porsche 962C. Order yours now.

 

Slot It SICA17E Porsche 962C KH n.17 ‘REPSOL’

Slot It SICA17E Porsche 962C KH n.17 ‘REPSOL’

$69.99

View this Car

The September/October issue of Model Car Racing has arrived—add a copy to your next order.

 

Model Car Racing Magazine, September/October 2017 number 95

See how you can recreate the Ferraris and Maseratis and Hudson Hornets that competed in the unbelievable Carrera Panamericana Road Race from Panama to Texas in the early fifties. Learn how set up your race track with split sector or segment times and how to use the system to set up a drag strip in 1/32 scale. There are full reports on the prototypes’ racing background and the performance of the 1/32 scale models of the 1952 Ferrari 340 Mexico Vignale Berlinetta, 1970 Camaro, 1976 Lancia Stratos Group 5, 1976 Capri 2600 RS, 1982 Porsche 908/3 Turbo, 1995 Opel Calibra and 2016 Ford GT. The track plans list all the sections needed so you can assemble a 2-Lane version of the Mount Para Raceway on a 5 x 9-foot ping-pong tabletop and a 2-Lane Paramount Ranch Track on a 9 x 14-foot tabletop with plastic track. There is also a plan for an HO scale AFX 4-Lane Paramount Ranch track on a 2 1/2 x 6 1/2-foot tabletop.

$7.95

View this Item

Pre-order

New Cars Coming Soon

Scalextric has announced a wild down-and-dirty paint scheme for the second version of the 1976 Aussie Ford XB Falcon. Like the C3697 first version, it will be highly collectible so pre-order yours now.

 

Scalextric C3983 Version 2 Ford XB Falcon 1976 “street”—PRE-ORDER NOW!

Scalextric Version 2 Ford XB Falcon 1976 “street”

The second version of the wild Aussie Ford XB Falcon C3697. This second version does not have a front splitter or side and rear windows. There is an oil drum and jerry can on the back. The new version has simulated rust, dirt and dust all over with it, with a few “scale size” dents.

$49.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter July 6th, 2017

July 9, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

We discovered a few of these Lego-like cars made for kids to build (and rebuild after each crash) from Scalextric. They run great on any 1/32 scale analog track and the prices are bargains.

C3708 Quick Build Black Skull hot rod

C3708 Quick Build Black Skull hot rod Build, Race and Destroy! Enjoy a high-speed car chase with these extreme drift and slide cars, but be careful, crash or collide and your car will be in pieces! This great value Super Resistant car is ideal for younger races who like full-contact chase action.

Features Include:

– Sticker sheets included

– Super resistant cars

– Easy change pick-ups

– Magnatraction

– Self-build using QuickBuild system

Single car included with two alternative decorative sticker designs

$39.99 $31.95

Save: 20% off

View this Car

C3709 Quick Build Police Car

Build, Race and Destroy! Enjoy a high-speed car chase with this extreme drift and slide car, but be careful, crash or collide and your car will be in pieces! This ‘cop car’ features a flashing roof light and siren and can be customised with clip-on wheels, decal sheets and mix and match parts. This great value Super Resistant car is ideal for younger races who like full-contact chase action.

Features Include:

– 360-degree powerslides

– Sticker sheets included

– Super resistant cars

– Easy change pick-ups

– Magnatraction

– Self-build using QuickBuild system

$39.99 $31.95

Save: 20% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

The Slot.it Cinzano-sponsored 1972 Alfa Romeo 33/3 is here now.

Slot It SICA11 Alfa Romeo 33/3, n.8 ‘CINZANO’

SICA11I Alfa Romeo 33/3 – #8 – 1000 Km Buenos Aires 1972

$69.99

View this Car

The Slot.it Castrol-sponsored Alfa 155 V6 TI DTM sedan racer and the Miller-sponsored Porsche 962 from the IMSA series have arrived. You can order yours now.

Slot It SICA35D Alfa Romeo 155 V6 T1 ‘Castrol’ n.26

Slot It SICA35D Alfa Romeo 155 V6 T1 ‘Castrol’ n.26, Nurburgring DTM 1994, driver Carsten Struwe

The Alfa Romeo 155 V6 TI is a racing car built to race in the DTM (Deutsche Tourenwagen Meisterschaft) series in 1993. At that time the German Touring Car Championship was the peak of technology for touring car racing, and it reserved for cars of Class 1 (first division or D1). The rules mandated cars with an engine displacement of 2.5 liters and 6 cylinders at most, derived from approved models and produced in no less than 25,000 units. The rules allowed deep changes to the car, provided that the external lines were maintained.
When Alfa Romeo introduced its 420 bhp, four-wheel drive 155, the more conventional rear-wheel drive Mercedes 190 couldn’t matched Alfa’s performance. In 1993, the Italian car dominated the category, winning 12 races out of 20 with its the two factory drivers, thus winning both drivers and constructors titles. To date, the Alfa Romeo 155 is the only non-German car to have won a DTM championship.

$69.99

View this Car

Slot It SICA25E Porsche 962 IMSA n.14 “Miller”

Porsche 962 IMSA Group C #14 – 24h Daytona 1988, drivers D. Bell, Al Holbert, C. Robinson

$69.99

View this Car

The wild Spyker C8 from the 24-hour race at Spa in 2006 is available now.

Scale Auto SC6075R Spyker C8 Laviolette GT2R 24hr Spa 2006 #85

Scale Auto SC-6075R Spyker C8 Laviolette GT2R 24hr Spa 2006 #85

$64.99

View this Car

The great all-new cars from Falcon Slot sold out but we were able to get a few more. We will fill orders in the sequence in which they are received.

Falcon Slot 09FA1 Porsche 908/3T Turbo Martini no.97 ‘Flying Again’ Limited Edition

Falcon Slot Porsche 908/3T Turbo Martini no.97 ‘Flying Again’ Limited Edition Vintage Racing series.

This car is a “collectible” in a special presentation box with a very limited production. It is a replica of a car currently being raced in vintage events (Falcon Slot calls the series “Flying Again”)

Falcon Slot is a new company created in 2017 by the founder of Fly. The new cars look very much like the original Fly cars with one-piece sidewinder chassis but with an adjustable front axle.

$109.99

View this Car

Falcon Slot 09002 Porsche 908/3T Turbo no. 2, Hockenheim “Grand Prix” 1982, 8th, driver Jurgen Bart

Falcon Slot Porsche 908/3T Turbo no. 2, Hockenheim “Grand Prix” 1982, 8th, driver Jurgen Barth. Falcon Slot is a new company created in 2017 by the founder of Fly. The new cars look very much like the original Fly cars with one-piece sidewinder chassis but with an adjustable front axle.

$68.99

View this Car

Falcon Slot 09003 Porsche 908/3T Turbo Nuremberg 200 6th 1983

Falcon Slot 09003 Porsche 908/3T Turbo Nuremberg 200 6th 1983 driver Jochen Dauer

Falcon Slot is a new company created in 2017 by the founder of Fly. The new cars look very much like the original Fly cars with one-piece sidewinder chassis but with an adjustable front axle.

$71.99

View this Car

The white Ford GT40 Mk.II that raced at Le Mans in 1969 and the second C7.R Corvette from Le Mans 2014 are here from NSR but quantities are limited so order yours now.

NSR NSR0041SW Ford GT40 Mark II #68 ’69 LeMans 24 Hours

NSR 1/32 Analog RTR Ford GT40 Mark II #68 1969 24 Hours of LeMans – EVO Chassis with adjustable front axle ride height – Includes 20,000 RPM Shark Motor Sidewinder – Lightweight drilled aluminum setscrew wheels front & back – Ultra smooth & quiet lightweight drilled aluminum axle gear & brass pinion – Suspension type motor pod – Heat treated axles with self lubricating bronze bushings – traction magnet – Photo Etched stainless steel grills – Clear coat finish over Tampo printing and paint for high gloss and maximum durability – Photo Etched stainless steel grills, body produced from 3 separate sections for improved detail, fully accessorized and painted body shell weighs 19 grams and the complete car 70 grams

$88.99

View this Car

NSR NSR0026AW #74 Corvette C7R 24 Hours of LeMans 2014

NSR NSR0026AW #74 Corvette C7R 24 Hours of LeMans 2014. Includes 20,000 RPM Shark Motor Sidewinder with lightweight drilled aluminum setscrew wheels front & back, Lightweight drilled aluminum axle gear, brass pinion, traction magnet

$86.99

View this Car

Pre-order

New Cars Coming Soon

These three super-fast NSR cars are expected by the end of the month so it is time to pre-order yours.

NSR NSR0052AW Corvette C7R White Kit—PRE-ORDER NOW!

NSR 1/32 Analog Chevrolet Corvette C7R White Kit – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO 2 Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods

$79.99

View this Car

NSR NSR0040SW Abarth 500 Trofeo Selenia #7—PRE-ORDER NOW!

NSR 1/32 Analog RTR Abarth 500 Trofeo Selenia #7 – Adjustable front axle ride height – Sidewinder Sark 20,000 RPM Motor – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Adjustable suspension type motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Clear Coat Finish for maximum durability and high gloss – Includes the EVO Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods

$84.99

View this Car

NSR NSR0039AW Audi R8 Ebrahim Motors 2013 #20—PRE-ORDER NOW!

NSR 1/32 Analog RTR AUDI R8 Audi R8 Ebrahim Motors Brazilian GT Championship 2013 #20 – Includes : Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Lightweight drilled aluminum setscrew wheels all around – All metal setscrew mount super smooth gearing – Heat treated axles – Machined bronze self lubricating bushings – Adjustable suspension motor pod – Anglewinder balanced King Motor with 21,400 RPM & 350 g-cm Torque “Magnetic Effect” – Clear coat finish over top of paint for best durability & high gloss

$84.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter June 29th, 2017

July 2, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

There are only a few of these out-of-production Ninco cars at this very special price. Limit one to a customer.

 

Ninco 50515 Acura LMP, Lowe’s (C)

1/32 scale slot car. Ready to run on all 1/32 scale non-digital slot car tracks. NINCO’s first Acura LMP livery, (the “Patron”) confirmed all suspicions… The Acura LMP is the fastest car NINCO has ever produced! Straight out of the box it will rival any car and the more expert drivers can futher improve its performance with Prorace Evo components, making it a benchmark car in speed and endurance racing. It is the chosen model for the 2008 NINCO World Cup. In-Line NC-5 FK180 motor.

$62.99 $45.95

Save: 27% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

The Modelant 1954 Maserati A6GCS Berlinetta has just arrived. Modelant produces hand-made cast-resin 1/32 scale replicas but they only offer about one a year. You can order yours now.

 

M-03 Maserati 1954 A6GCS Berlinetta

This 1954 Maserati A6GCS Berlinneta is a tribute to the driver Anna Maria Peduzzi, nicknamed La Marocchina for her dark skin and considered one of the best female drivers of this time, sitting her at the wheel of the street version of the chassis 2070 originally made with a Fantuzzi Spyder body.

The model is shipped in an open oak-finished box with glass windows to serve as a display. The car rests on a resin diorama inspired by the cobblestone streets of that time.

The production is limited and numbered to 150 units.

$279.95

View this Car

Pre-order

New Cars Coming Soon

Slot.it is shipping the white Castrol-sponsored Alfa 155 V6 TI DTM sedan racer and the Miller-sponsored Porsche 962 from the IMSA series. Be sure to pre-order yours.