Shop   |   Log In   |   Search    
Shop Site

Newsletter April 26th, 2018

April 29, 2018 by  
Filed under Newsletter Archive 2018

Comments Off

We found a few of these out-of-production Ninco cars and have them at a very special price. Limit one to a customer.

 

Ninco 50525 Acura LMP, ALMS 2008 (C)

1/32 scale slot car. Ready to run on all 1/32 scale non-digital slot car tracks.

The Andretti-Green Racing LMP2 entry sponsored by XM Satellite Radio.

* Replacement stock tires – Ninco 80516 *

Here it is!!! NINCO’s fastest car goes one step further and comes with the highest spec PRORACE components and joins the LIGHTNING family of cars, for out-of-the-box, top performance in competition racing. NC-6, Prorace gears, ProRace Evo hubs & axles, Lexan chassis with 2 holes to mount motor, silicone plug-in cables, ball bearings, Prorace guide.

Tech. Specifications

  • Magnet cylinder Std. 8×5 (1500gm)
  • Motor NC-5 “Speeder” FK180
  • Guide With Suspension
  • Front Axle 53,5 mm
  • Front Tyres 19×10
  • Rear Axle 53,5 mm
  • Rear Tyre 19×10
  • Length 145 mm
  • Width 64,9 mm
  • Height 35,3 mm
  • Weight 83,3 gr

$69.99 $45.95

Save: 34% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

Two new classic Indy Roadsters raced by the most popular drivers are here from the Slot-Indy division of Ostorero. They are only making 120 so you will want to order yours now.

 

Slot-Indy ODG-240 Watson-Simoniz, 1959 Simoniz Special #16, driver Jim Rathmann

Hand-made cast-resin cars with photoetched metal chassis.
Complete with the wood base and the brickyard strip.

The Simoniz Special # 16 Watson Roadster was driven at the 1959 Indy 500 by Jim Rathmann, he was third on the starting grid and finished second after a long battle with Rodger Ward. A little curiosity, the Watson did not have the rear bumper in 1959.

$219.99

View this Car

 

Slot-Indy ODG-241 Watson-Bryant, 1961 Bryant Special #8, driver Len Sutton

Hand-made cast-resin cars with photoetched metal chassis.
Complete with the wood base and the brickyard strip.

The Bryant Special # 8 was driven by Len Sutton. He was eighth on the starting grid in the 1962 Indy 500 but he had to retire in the race due to a clutch problem. The real car from 1961 was recently restored and auctioned by Sotheby’s, reaching €570,000.

$219.99

View this Car

We ordered some special screws from Sideways so you can tune-up any of their chassis. The small Allen head screws are needed to control the front axle’s up and down movement to adjust the depth of the pickup blade in the slot (the “Ride Height”). The brass screws will be needed if you want to install the add-on plastic blocks that are included with new Sideways Huracan chassis to stiffen it.

 

SWM2/6evo Hexagonal Allen Screws M2 x 6mm 10pcs

SWM2/6evo Hexagonal Allen Screws M2 x 6mm 10pcs

These small Allen head screws are needed to control the front axle’s up and down movement to adjust the depth of the pickup blade in the slot (the “Ride Height”).

$3.99

View this Car

 

SWMS03 1.9 X 5mm big head conic 10pcs

SWMS03 1.9 X 5mm big head conic 10pcs

These brass screws will be needed if you want to install the add-on plastic blocks that are included with new Sideways Huracan chassis to stiffen it.

$2.99

View this Car

Pre-order

New Cars Coming Soon

The Bugatti Atlantic is one of the top two most coveted classics. You can have your own 1/32 scale hand-made cast-resin and etched-metal replica from MMK in a choice of silver, maroon or dark blue. We were only able to obtain a few so pre-order yours now.

 

MMK MSL03S Bugatti Atlantic, silver—PRE-ORDER NOW!

MMK MSL03S Bugatti Atlantic, silver

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$299.99

View this Car

 

MMK MSL03M Bugatti Atlantic, maroon—PRE-ORDER NOW!

MMK MSL03M Bugatti Atlantic, maroon

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$299.99

View this Car

 

MMK MSL03BD Bugatti Atlantic, dark blue—PRE-ORDER NOW!

MMK MSL03BD Bugatti Atlantic, dark blue

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$299.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter April 12th, 2018

April 15, 2018 by  
Filed under Newsletter Archive 2018

Comments Off

All three of these cars are out production, but we found a few in the warehouse. They are as realistic as the best die-cast replicas but they can be raced on any 1/32 scale track.

 

Slot Classic CJ32 Jaguar Mk II, Tour de France

Here’s a classic Jaguar sedan as seen in the Tour de France (Auto), an event that combined rally stages on public roads with races on several tracks throughout France.

$349.99 $299.95

Save: 14% off

View this Car

 

Modelant MO-2 Alfa Romeo 8C 2900B 1938 Mille Miglia winner (C)

MO-2 Alfa Romeo 8C 2900B 1938 Mille Miglia winner, driven by Clemente Biondetti and Aldo Stefani.

This car was also raced in America in the early fifties (with a different racing number) by Phil Hill.

Modelant models are limited edition hand-made from high quality polyurethane resin with individual cast and etched details and decals. The model includes a hand-finished wood display box. Production limited to 300 models.

$249.95 $199.95

Save: 20% off

View this Car

 

Slot Classic CJ41 Cisitalia 202MM 1948

1/32 scale slot car, ready to run on all 1/32 scale non-digital slot car tracks. Limited production run of 500 cars worldwide.

$279.99 $224.95

Save: 20% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

The first 1/24 scale Trans-Am Mustangs and Camaros are finally here from BRM. They are rugged and realistic. There will only be a few available so order yours while the stock lasts.

 

ScaleRacing/BRM069 1:24th scale Penske Camaro #9

Assembled in Tacoma, Washington, USA with alumni um anodized chassis 3mm thick, ball bearings, aluminum wheels and axle holders, BRM “Black” (25,000 rpm, 325g-cm) motor, 38-tooth spur gear, 11-tootdh brass pinion. Ready to fit digital chip.

$139.99

View this Car

 

ScaleRacing/BRM072 1:24th scale Fly Navy Camaro #87

Assembled in Tacoma, Washington, USA with alumni um anodized chassis 3mm thick, ball bearings, aluminum wheels and axle holders, BRM “Black” (25,000 rpm, 325g-cm) motor, 38-tooth spur gear, 11-tootdh brass pinion. Ready to fit digital chip.

$139.99

View this Car

 

ScaleRacing/BRM073 1:24th scale Mustang Boss 302 #16

Assembled in Tacoma, Washington, USA with alumni um anodized chassis 3mm thick, ball bearings, aluminum wheels and axle holders, BRM “Black” (25,000 rpm, 325g-cm) motor, 38-tooth spur gear, 11-tootdh brass pinion. Ready to fit digital chip.

$139.99

View this Car

 

ScaleRacing/BRM075 1:24th scale Mustang Boss 302 #15

Assembled in Tacoma, Washington, USA with alumni um anodized chassis 3mm thick, ball bearings, aluminum wheels and axle holders, BRM “Black” (25,000 rpm, 325g-cm) motor, 38-tooth spur gear, 11-tootdh brass pinion. Ready to fit digital chip.

$139.99

View this Car

The Porsche 924GTS won the GTP class at Le Mans in 1981 and Falcon Slot has produced a replica that’s correct down to the unique grill. You can order yours now.

 

Falcon Slot 02005 Porsche 924GTR Le Mans 1982 1st in GTP ‘Brumos

Falcon Slot Porsche 924GTR Le Mans 1982 1st in GTP ‘Brumos’, drivers Jim Busby, Doc Bundy and Marcel Pignot. Revised body with grill unique to the Le Mans class-winner.

$78.99

View this Car

The original Monogram Grand National stock car bodies are back. Made from the original molds. The kit includes an unpainted white body, clear plastic windshield and painted interior.

 

Monogram PMTR8505 ’67 Fairlane Stock Car Body White Kit

Monogram 1967 Fairlane Stock Car White Body Kit with Chrome, Glass and Painted & Assembled Interior

$24.99

View this Item

 

Monogram PMTR8506 ’65 Galaxie Stock Car Body White Kit

Monogram 1965 Galaxie Stock Car White Body Kit with Chrome, Glass and Painted & Assembled Interior

$24.99

View this Item

The new bargain-price controller is here from Professor Motor with the 45-ohm resistor that is most popular with home racers. There is a choice of three connectors (alligator clips, old-style Carrera terminals or no clips/boots) to match your track.

 

Professor Motor PMTR2144 45 Ohm Resistor Controller w/Alligator Clips

Professor Motor 45 Ohm Resistor Controller – Includes 16 gage 42″ PVC insulated wire harness, nickel plated alligator clips with color coded insulating boots and electronic self resetting circuit breaker to protect against accidental misconnect

This controller is NOT polarity sensitive – Recommended Applications : Stock or mildly tuned RTR Cars (1/32 Scalextric, Carrera, Ninco, Monogram, etc.), stock to moderate tuned HO

Easily upgraded with a rotary pot to provide adjustable variable braking performance

$39.99

View this Item

 

Professor Motor PMTR2145 45 Ohm Resistor Controller w/NO Clips or Boots

Professor Motor 45 Ohm Resistor Controller – Includes 16 gage 42″ PVC insulated wire harness, NO Clips & Boots, and electronic self resetting circuit breaker to protect against accidental misconnect

This controller is NOT polarity sensitive – Recommended Applications : stock to moderate tuned HO

Easily upgraded with a rotary pot to provide adjustable variable braking performance

$39.99

View this Item

 

Professor Motor PMTR2146 45 Ohm Resistor Controller w/Carrera Terminals

Professor Motor 45 Ohm Resistor Controller – Includes 16 gage 42″ PVC insulated wire harness, Carrera Color Coded Terminals, and electronic self resetting circuit breaker to protect against accidental misconnect

This controller is NOT polarity sensitive – Recommended Applications : stock to moderate tuned HO

Easily upgraded with a rotary pot to provide adjustable variable braking performance

$39.99

View this Item

Pre-order

New Cars Coming Soon

Two new cars are coming soon from the Slotwings division of Fly. They are both limited production so you will want to pre-order yours now.

 

Fly (Slotwings) W038-03 BMW M3Tour de Corse 1983 —PRE-ORDER NOW!

Fly (Slotwings) BMW M3Tour de Corse 1983, drivers F. Chatriot and M. Perin

$59.99

View this Car

 

Fly (Slotwings) W044-05 Porsche 934 Porsche Cup 1976—PRE-ORDER NOW!

Fly (Slotwings) W044-05 Porsche 934 Porsche Cup 1976, driver Bob Wollek

$59.99

View this Car

Five new cars are coming from NNSR including the second version of the fabulous Porsche 908/03 from the 1970 Nurburgring 1000km. The Corvette “Indy 500 Pace Car” is coming in white or green with your choice of sidewinder or anglewinder chassis. You can pre-order all of them now.

 

NSR NSR0063SW Porsche 908/3 Spyder #15 1970 Nuremberg—PRE-ORDER NOW!

Setscrew Aluminum wheels all around – Sidewinder Balanced Shark Motor 20,000 RPM – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Adjustable front axle ride height – Ultra smooth and quiet all metal gearing – Clear Coat Finish for maximum durability and high gloss

$99.99

View this Car

 

NSR NSR0062SW Corvette C7R Indy 500 Pace Car—PRE-ORDER NOW!

NSR 1/32 Analog RTR Corvette C7R Indy 500 pace car – Setscrew Aluminum wheels all around – Anglewinder Balanced Shark Motor 25,000 RPM – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Adjustable front axle ride height – Ultra smooth and quiet all metal gearing – Clear coat finish over paint and Tampo printing for maximum durability & high gloss

$88.99

View this Car

 

NSR NSR0062AW Corvette C7R Indy 500 Pace Car—PRE-ORDER NOW!

NSR 1/32 Analog RTR Corvette C7R Indy 500 pace car – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Adjustable front axle ride height – Ultra smooth and quiet all metal gearing – Clear coat finish over paint and Tampo printing for maximum durability & high gloss

$88.99

View this Car

 

NSR NSR0082AW Corvette C7R Indy 500 Pace Car—PRE-ORDER NOW!

NSR 1/32 Analog RTR Corvette C7R Indy 500 pace car – Setscrew Aluminum wheels all around – Anglewinder Balanced Shark Motor 25,000 RPM – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Adjustable front axle ride height – Ultra smooth and quiet all metal gearing – Clear coat finish over paint and Tampo printing for maximum durability & high gloss

$89.99

View this Car

 

NSR NSR0082SW Corvette C7R Indy 500 Pace Car—PRE-ORDER NOW!

NSR 1/32 Analog RTR Corvette C7R Indy 500 pace car – Setscrew Aluminum wheels all around – Anglewinder Balanced Shark Motor 25,000 RPM – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Adjustable front axle ride height – Ultra smooth and quiet all metal gearing – Clear coat finish over paint and Tampo printing for maximum durability & high gloss

$88.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter April 5th, 2018

April 8, 2018 by  
Filed under Newsletter Archive 2018

Comments Off

A super deal on two super-quick Slot.it cars for just two weeks. One to a customer. No dealers.

 

Slot It SICA34B Porsche 962/85 #4 Le Mans 1988 ‘Camel’

Slot It SICA34B Porsche 962/85 #4 Le Mans 1988 ‘Camel’

$69.99 $54.95

Save: 21% off

View this Car

 

Slot It SICA03H Porsche 962C LH ‘FATurbo-Express’ 24h Le Mans ’93

Slot.it SICA03H Porsche 962C LH ‘FATurbo-Express’ 24h Le Mans ’93

$69.99 $54.95

Save: 21% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

The three new March 761 Formula 1 cars from the Slotwings division of Flyslot are here now so you can have one or all three for your racing team.

 

Fly W045-03 March 761, GP Canada 1977, Drive Ian Scheckter

Fly March 761, GP Canada 1977, Drive Ian Scheckter

$69.99

View this Car

 

Fly W045-04 March 761 GP Brazil 1976, driver Lella Lombardi

Fly March 761 GP Brazil 1976, driver Lella Lombardi

$69.99

View this Car

 

Fly W045-05 March 761 GP Monaco 1976, driver Ronnie Peterson

Fly W045-05 March 761 GP Monaco 1976, driver Ronnie Peterson

$69.99

View this Car

The 99th issue of Model Car Racing magazine is here with step-by-step instructions on how to install the Slot.it HRS/2 chassis in Scalextric GT cars, five race track tests, plans for the famous Paramount Ranch Track and more.

 

MCR99 Model Car Racing Magazine, May/June 2018 (C)

The results of the Race Track Tests to measure the flat-out performance of five new cars running free of their downforce magnets are featured in this issue. You can also learn how to upgrade the dozens of Scalextric modern GT cars with a new Slot.it HRS/2 chassis to match quickest cars in the class. There are full reports on the prototypes’ racing background and the performance of the 1/32 scale models of the 1966 Ford J Car, 1967 Ford Mk.IV, 1969 Autocoast Ti22 Can-Am, 1970 Chaparral 2J Can-Am, 1970 Porsche 908/03, 1980 Porsche 944 Carrera GTS, 1991 Porsche 962C, 2012 Audi R18 ultra, 2015 Mercedes-Benz SLS AMG GT3 and 2016 Sideways Huracan GT3. The track plans list all the sections needed so you can assemble a 2-Lane version of the Paramount Ranch Track on a 5 x 9-foot ping-pong tabletop and a 2-Lane Paramount Ranch Track on an 11 X 13 ½-foot tabletop with plastic track. There is also a plan for an HO scale AFX 4-Lane Paramount Ranch Track on a 4 x 8-foot tabletop.

$7.95

View this Item

Pre-order

New Cars Coming Soon

The bright red and white Brabham BT44 from the 1974 Canadian Grand Prix is coming soon from Slotwings so you can pre-order yours now.

 

Flyslot (Slotwings) 062105 Brabham BT44 Canadian GP 1974, driver Eppie Wietzes—PRE-ORDER NOW!

Flyslot (Slotwings) 062105 Brabham BT44 Canadian GP 1974, driver Eppie Wietzes

$69.99

View this Car

The MMK hand-made cast-resin ready-to-race replicas of the Mercedes-Benz 300SL are on the way including the cars that won Le Mans, that finished 2-4 at the Targa Florio in 1952, finished 1-2 at the 1952 German GP (for sports cars) and that was the prototype for the 300SL ‘Gullwing’ that was to be produced two years later. There are nine versions of the 300SL coupe. The quantities are limited so pre-order yours now.

 

MMK78A Mercedes-Benz 300SL no. 21 winner Le Mans 1952—PRE-ORDER NOW!

MMK78A Mercedes-Benz 300SL no. 21 winner Le Mans 1952, drivers Hermann Lang and Fritz Riess

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78B Mercedes-Benz 300SL no. 20 second at Le Mans 1952—PRE-ORDER NOW!

MMK78B Mercedes-Benz 300SL no. 20 second at Le Mans 1952, drivers Theo Helfrish and Nerbert Niedermayer

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78C Mercedes-Benz 300SL no. 22 dnf (generator failure in ninth hour) at Le Mans 1952—PRE-ORDER

MMK78C Mercedes-Benz 300SL no. 22 dnf (generator failure in ninth hour) at Le Mans 1952, drivers Karl Kling and Hans Klenk/

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78D Mercedes-Benz 300SL no. 613 Mille Miglia 1952 fourth overall—PRE-ORDER NOW!

MMK78D Mercedes-Benz 300SL no. 613 Mille Miglia 1952 fourth overall, drivers Rudi Caracciola and Kurrle

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78E Mercedes-Benz 300SL no. 623, Mille Miglia 1952, second overall—PRE-ORDER NOW!

MMK78E Mercedes-Benz 300SL no. 623, Mille Miglia 1952, second overall, drivers Karl Kling and Hans Klenk/

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78F Mercedes-Benz 300SL no. 626, Mille Miglia 1952, dnf

MMK78F Mercedes-Benz 300SL no. 626, Mille Miglia 1952, dnf, drivers Hermann Lang and Grupp

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78R Mercedes-Benz 300SL no. 16, German GP Race 1952, red,dnf—PRE-ORDER NOW!

MMK78G Mercedes-Benz 300SL no. 16, Bern German GP Race 1952, red, dnf, driver Rudi Caracciola

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78G Mercedes-Benz 300SL no. 18, Bern German GP Race 1952, green, winner—PRE-ORDER NOW!

MMK78H Mercedes-Benz 300SL no. 18, Bern German GP Race 1952, green, first overall, driver Karl Kling

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

 

MMK78H Mercedes-Benz 300SL no. 20, Bern German GP Race 1952, blue, 2nd, —PRE-ORDER NOW!

MMK78J Mercedes-Benz 300SL no. 20, Bern German GP Race 1952, blue, second overall, driver Hermann Lang

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

$176.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter March 8th, 2018

March 11, 2018 by  
Filed under Newsletter Archive 2018

Comments Off

The “Die Cast Hall of Fame” group has recognized slot cars as a viable part of the model car hobby. They recently expanded their group beyond Hot Wheels and Exoto-size die-cast to include slot cars and plastic model kits. The new group is called “Model Car Hall of Fame”. To further that concept the owner of Electric Dreams, Scott Bader, has been brought in to the selection committee. It is a more significant change that it might seem because slot cars are the only model cars in the group that actually run!

 

A Bigger Mission, a new name – Slot Cars, Model Kits and Scott Bader joining the Selection Committee

FROM THE MODEL CAR HALL OF FAME – At the Hall of Fame, we’re revving higher and higher, and it’s time to upshift. We’ve been steadily adding scales, classes and dozens of new inductees, becoming one of the biggest communities of model car enthusiasts in the world. To best reflect this new status, we’re excited to announce our transition from the Diecast Hall of Fame into the Model Car Hall of Fame, now also covering Model Kits and Slot Cars.

Read More

One of the Fords that ruled the high banks of Daytona is available for two weeks at a special sale price. One to a customer. No dealers.

 

Scalextric C3325 Ford GT40 P1075, Daytona 1969 (C)

1/32 scale slot car, ready to run on all 1/32 and 1/24 scale non-digital tracks. The most successful GT40 of all, 2-time LeMans winner P1075, as it appeared at Daytona in 1969. With working headlights.

Drivers: Bolisetti and Glew.

$69.95 $54.95

Save: 21% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

The wild cartoon-deco Mercedes AMG GT3 car is here from Scalextric
C3852 Mercedes AMG GT3 (Anime)

 

Scalextric C3852 Mercedes AMG GT3 (Anime)

Goodsmile Hatsune Miku AMG Race in the Japanese GT300 series, drivers Nobuteru Taniguchi and Tatsuya Kataoka started the first race of the 2016 season at Okayama in their brand new Mercedes AMG GT3 with a great result, having qualified in 8th they managed to work their way through the traffic to an impressive 2nd place on the podium.

$49.99

View this Car

We were able to obtain a few of these out-of-production Slot.it Lolas produced for the 2017 Spanish Slot Championship. One to a customer.

 

Slot.it SISC39A Lola B12/80 Limited Edition 2017 Spanish Slot Championship)

Slot.it SISC39A Lola B12/80 XXII Campeonato Espana de Slot 2017 (2017 Spanish Slot Championship) Limited Edition

$70.99

View this Car

The new NSR C6R Corvette is here with a choice of either sidewinder or anglewinder chassis so you can have yours now.

 

NSR NSR0057AW Corvette C6R Malisped Monza 2008 #37

NSR 1/32 Analog Corvette C6R Malisped Monza 2008 #37 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Clear Coat Finish over paint & Tampo printing for maximum durability & Gloss – Adjustable suspension motor pod – Includes EVO Chassis that accepts Anglewinder / Inline / Sidewinder Triangular Motor Pods

$88.99

View this Car

 

NSR NSR0057SW Corvette C6R Malisped Monza 2008 #37

NSR 1/32 Analog Corvette C6R Malisped Monza 2008 #37 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – SIDEWINDER Balanced SHARK Motor 25,000 RPM & 176 g-cm Torque – Clear Coat Finish over paint & Tampo printing for maximum durability & Gloss – Adjustable suspension motor pod – Includes EVO Chassis that accepts Anglewinder / Inline / Sidewinder Triangular Motor Pods

$88.99

View this Car

Pre-order

New Cars Coming Soon

The SRC McLaren M23 is finally coming to compete with the SRC Ferrari 312T4. You can pre-order yours.

 

SRC 02301 1975 McLaren M23 Ford Yardley, driver Denny Hulme—PRE-ORDER NOW!

SRC 02301 1975 McLaren M23 Ford Yardley, driver Denny Hulme

$117.99

View this Car

The Mobil-sponsored Porsche 911 GT198, the popular Martini-sponsored Lancia and the black Nissan R390 GT1 are due soon so it is time to pre-order yours.

 

Slot It SICA08F Lancia LC2, no. 6, “Martini Hasseroder” Brands Hatch 1984—PRE-ORDER NOW!

SICA08F Lancia LC2, no. 6, “Martini Hasseroder” Brands Hatch 1984, drivers P.Martini, P. Barilla and Bob Wollek

$59.99

View this Car

 

Slot It SICA23E Porsche GT 911 FIA GT Championship—PRE-ORDER NOW!

Slot It SICA23E Porsche GT 911 FIA GT Championship

$59.99

View this Car

 

Slot It Slot It SICA05F Nissan R390 GTNissan R390 GT1, No. 21 Le Mans Test Day 1991—PRE-ORDER NOW!

Slot It Slot It SICA05F Nissan R390 GTNissan R390 GT1, No. 21 Le Mans Test Day 1991

$59.99

View this Car

This new bargain-price set and four new cars are on the way so you can pre-order yours now.

 

C3986 Ford XW Falcon “Australia Special” —PRE-ORDER NOW!

C3986 Ford XW Falcon “Australia Special”

$39.99

View this Car

 

Scalextric C3932 Audi R8 Police Car – Black & White—PRE-ORDER NOW!

While not your average police car, the Audi R8 is surely something not many criminals would be able to escape from! This Scalextric version comes complete with both a siren and flashing police lights on the roof.

Perfect for any aspiring law enforcement officer to test their mettle!

$39.99

View this Car

 

Scalextric C3919 Honda Civic Type R NGTC – BTCC 2017 Gordon Shedden—PRE-ORDER NOW!

Scalextric Honda Civic Type R NGTC – BTCC 2017 Gordon Shedden

$39.99

View this Car

 

Scalextric C3915 Honda Civic Type R NGTC – BTCC 2017 Matt Simpson—PRE-ORDER NOW!

Scalextric Honda Civic Type R NGTC – BTCC 2017 Matt Simpson

$39.99

View this Car

 

Scalextric C1376T Street Racers GT cars (Anime)—PRE-ORDER NOW!

Scalextric C1376T Street Racers GT cars (Anime)

Space Required: 191 x 132cm Track Length: 484cm Key Features 4 Track Layout

Two rugged GT cars with wild comic graphics battle it out on a choice of four twisty road circuits.

$99.99

View this Set

NSR Has announced three more paint schemes for the quick 1970 Porsche 908/03 for shipment in the fall and winter of 2018. You can pre-order yours now.

 

NSR NSR0063SW Porsche 908/3 Spyder #15 1970 Nuremberg—PRE-ORDER NOW!

Setscrew Aluminum wheels all around – Sidewinder Balanced Shark Motor 20,000 RPM – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Adjustable front axle ride height – Ultra smooth and quiet all metal gearing – Clear Coat Finish for maximum durability and high gloss

$99.99

View this Car

 

NSR NSR0069SW Porsche 908/3 Spyder #12 1970 Targa Florio—PRE-ORDER NOW!

NSR 1/32 Analog RTR Porsche 908/3 Spyder #12 1970 Targa Florio WINNER – Setscrew Aluminum wheels all around – Sidewinder Balanced Shark Motor 20,000 RPM – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Adjustable front axle ride height – Ultra smooth and quiet all metal gearing – Clear Coat Finish for maximum durability and high gloss

$99.99

View this Car

 

NSR NSR0075SW Porsche 908/3 Spyder #20 1970 Targa Floria—PRE-ORDER NOW!

NSR 1/32 Analog RTR Porsche 908/3 Spyder #20 1970 Targa Florio – Setscrew Aluminum wheels all around – Sidewinder Balanced Shark Motor 20,000 RPM – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Adjustable front axle ride height – Ultra smooth and quiet all metal gearing – Clear Coat Finish for maximum durability and high gloss

$99.99

View this Car

NSR is producing this replica of one of their first cars in Gulf colors as a 50th anniversary edition of the founder of NSR for later in 2018. You can pre-order it now.

 

NSR NSR1191AW Mosler MT900T 5th Anniversary Commemorative Limited Edition—PRE-ORDER NOW!

NSR Mosler MT900T 1/32 Analog Anglewinder Evo 5 Triangular Motor Pod RTR 5th Anniversary #64 Team NSR Commemorative Limited Edition of 600 pcs.- Commemorating The NSR Company Founder

$134.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter March 1st, 2018

March 4, 2018 by  
Filed under Newsletter Archive 2018

Comments Off

There is a special low price on this Scalextric Modern GT-class racer but only for a limited time. One to a customer. No dealers.

 

Scalextric C3379 Lotus Evora #48 Petronas (C)

1/32 scale slot car, ready to run on all 1/32 scale non-digital tracks.

Digital plug ready. Accepts C8515 plug-in digital chip. British GT 2012.

Drivers: Bolisetti and Glew.

$44.99 $29.95

Save: 33% off

View this Car

Pre-order

New Cars Coming Soon

We were able to obtain a few of these out-of-production Slot.it Lolas produced for the 2017 Spanish Slot Championship. One to to a customer. You can pre-order it now.

 

Slot.it SISC39A Lola B12/80 Limited Edition 2017 Spanish Slot Championship)–PRE-ORDER NOW!

Slot.it SISC39A Lola B12/80 XXII Campeonato Espana de Slot 2017 (2017 Spanish Slot Championship) Limited Edition

$70.99

View this Car

Scalextric has released photographs of eight more of the cars that will be shipped in 2018 including the 2017 Ford GT. You can see all of the 2018 products HERE.

 

Scalextric C3858 Ford GT – GTE Number 69 LeMans 2016—PRE-ORDER NOW!

Scalextric C3858 Ford GT – GTE Number 69 LeMans 2016

Ford Returned to Le Mans on the 50th anniversary of their famous 1-2-3 victory. The number 69 car of Ryan Briscoe, Richard Westbrook & Scott Dixon Qualified in 2nd position in class, and after a hugely entertaining race finished the race in 20th overall but most importantly 3rd in class and with the number 68 Ford GT finishing 1st it was a very successful return for Ford with a 1-3-4 finish

$39.99

View this Car

 

Scalextric C3857 Ford GT – GTE Number 68 Le Mans 2016—PRE-ORDER NOW!

Scalextric C3857 Ford GT – GTE Number 66 Le Mans 2016

Ford Returned to Le Mans on the 50th anniversary of their famous 1-2-3 victory. The number 66 car of Olivier Pla, Stefan Mücke &Billy Johnson Qualified in 5th position in class, and after a hugely entertaining race finished the race in 21st overall but most importantly 4th in class and with the number 68 Ford GT finishing 1st it was a very successful return for Ford with a 1-3-4 finish.

$39.99

View this Car

 

Scalextric C3917 McLaren F1 GTR 1997 Nurburgring BBA Competition—PRE-ORDER NOW!

Scalextric C3917 McLaren F1 GTR 1997 Nurburgring BBA Competition

$39.99

View this Car

 

Scalextric C3935 Dodge Challenger 1970, white —PRE-ORDER NOW!

Scalextric C3935 Dodge Challenger 1970, white

$39.99

View this Car

 

Scalextric C3941 Mercedes AMG GT3 2017 SunEnergy1 Racing Daytona 24 Hours —PRE-ORDER NOW!

Scalextric C3941 Mercedes AMG GT3 2017 SunEnergy1 Racing Daytona 24 Hours

$39.99

View this Car

 

Scalextric C3948 Ford Daytona Prototype Sebring 2014 Chip Ganassi Racing Telcel Ford—PRE-ORDER NOW

Scalextric C3948 Ford Daytona Prototype Sebring 2014 Chip Ganassi Racing Telcel Ford

$39.99

View this Car

 

Scalextric C3958 2017 Formula One Car – Red—PRE-ORDER NOW!

Scalextric C3958 2017 Formula One Car – Red—PRE-ORDER NOW!

$29.99

View this Car

 

Scalextric C3965A McLaren F1 GTR LeMans 1995, winner – Limited Edition —PRE-ORDER NOW!

Scalextric C3965A McLaren F1 GTR Le Mans 1995, winner – Limited Edition

$58.49

View this Car

NSR has produced four different chassis and pods for the new Porsche 908. The pods will also fit the NSR Porsche 917, Ford GT40 Mark II, Ford Mk. IV, P68 and Abarth 500 Assetto Cors.

 

NSR 1270 Narrowed Extrahard RED SW Motor Mount EVO—PRE-ORDER NOW!

NSR NARROWED EXTRAHARD RED SIDEWINDER SHORT CAN MOTOR MOUNT (MOTOR POD) – NEW ! EVO – For Porsche 917, Ford GT40 Mark II / IV, P68 and Abarth 500 Assetto Corse Applications – REQUIRES NSR4805 SINGLE FLANGE PLAIN BUSHINGS !

$9.99

View this Item

 

NSR 1271 Narrowed Soft Blue SW Motor Mount EVO—PRE-ORDER NOW!

NSR1271 Narrowed Soft Blue SW Motor Mount EVO
NSR NARROWED SOFT BLUE SIDEWINDER SHORT CAN MOTOR MOUNT (MOTOR POD) – NEW ! EVO – For Porsche 917, 908, Ford GT40 Mark II / IV, P68 and Abarth 500 Assetto Corse Applications – REQUIRES NSR4805 SINGLE FLANGE PLAIN BUSHINGS !

$9.99

View this Item

 

NSR 1272 Narrowed Medium Black SW Motor Mount EVO—PRE-ORDER NOW!

NSR NARROWED MEDIUM BLACK SIDEWINDER SHORT CAN MOTOR MOUNT (MOTOR POD) – NEW ! EVO – For Porsche 917, Ford GT40 Mark II / IV, P68 and Abarth 500 Assetto Corse Applications – REQUIRES NSR4805 SINGLE FLANGE PLAIN BUSHINGS !

$9.99

View this Item

 

NSR 1273 Narrowed Hard WHite SW Motor Mount EVO—PRE-ORDER NOW!

NSR NARROWED HARD WHITE SIDEWINDER SHORT CAN MOTOR MOUNT (MOTOR POD) – NEW ! EVO – For Porsche 917, Ford GT40 Mark II / IV, P68 and Abarth 500 Assetto Corse Applications – REQUIRES NSR4805 PLAIN BUSHINGS !

$9.99

View this Item

 

NSR 1600 Porsche 908/3 Chassis SOFT BLUE—PRE-ORDER NOW!

NSR Porsche 908/3 Chassis SOFT BLUE – Use with narrowed motor mounts

$9.99

View this Item

 

NSR 1601 Porsche 908/3 Chassis MEDIUM BLACK—PRE-ORDER NOW!

NSR Porsche 908/3 Chassis MEDIUM BLACK – Use with narrowed motor mounts

$9.99

View this Item

 

NSR 1602 Porsche 908/3 Chassis HARD WHITE—PRE-ORDER NOW!

NSR Porsche 908/3 Chassis HARD WHITE – Use with narrowed motor mounts

$9.99

View this Item

 

NSR 1603 Porsche 908/3 Chassis EXTRAHARD GREEN—PRE-ORDER NOW!

NSR Porsche 908/3 Chassis EXTRAHARD GREEN – Use with narrowed motor mounts

$9.99

View this Item

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter February 22nd, 2018

February 25, 2018 by  
Filed under Newsletter Archive 2018

Comments Off

All of the 2018 Carrera 1/32 analog, 1/32 digital, 1/24 digital and 1/43 cars and sets that have been announced are now available for pre-order under this LINK HERE. We have listed all of them but a few do not yet have photographs. There are over 50 exciting cars coming including a ‘71 Chevrolet Chevelle SS454 “Super Stocker”, 1981 Porsche 935/78 Group 5 (only in Digital 132) and three Formula 1 cars in 1/32 scale. A new Ferrari 512S will be available in 1/24 and a ‘68 Ford Mustang, Ferrari 488 GT3 and Formula E racers in 1/43 scale.

Build these rare and wonderful LeMans racer MMK kits. These two are available for just two weeks at a very special price and there are more super deals on kits on the website. LINK HERE.

 

MMK SF04K DB Panhard coupe, LeMans 1960, body kit

Body kit, prepainted, decalled and clear coated. The hard stuff has been done for you. Includes wheels and tires. Additional painting required to complete model as shown,

Perhaps the quintessential example of what Phil Hill used to refer to as the “French tiddlers”, cars designed to win the Index of Thermal Efficiency or whatever arcane prize was included in the LeMans rules to give French constructors and their 1-liter cars something they could win without having to compete against Ferrari, Maserati, Aston Martin, and later Ford. These little cars made life interesting for the drivers of the really fast movers, especially on a rainy night halfway down the Mulsanne Straight (no chicanes in those days) in an overtaking situation with a speed differential of 50 mph or more. It was even worse for the drivers of the GT cars who all too often found themselves overtaking one of these cars by about 40 mph while simultaneously trying to get out of the way of a big sports prototype car catching them by 20 mph or so. The occasional rear-end shunts could be truly monumental.

Need a chassis for this body? See all the available universal chassis HERE. In that category you will find a variety of chassis manufactured for the purpose of building complete cars from body kits. We have tried to include in the product page for each chassis as much manufacturer’s information as possible, but this is often somewhat scant. In general, your best option is to select a chassis with adjustable wheelbase so you can simply set the wheelbase to fit the body. Also, the narrower the chassis, the wider the wheels and tires you will be able to fit under any given body.

Unfortunately, because of the large selection of choices offering different performance levels and price points and because we do not have direct experience with your specific combination of track layout and surface condition, power, and racing rules we are unable to “spec” a complete car build for you. We will, however, try to answer any specific technical questions you may have.

$99.50 $69.95

Save: 30% off

View this Car

 

MMK 58K Lister Jaguar Coupe, LeMans 1963 PAINTED BODY KIT

MMK58K Lister Jaguar Coupe, LeMans 1963 PAINTED BODY KIT.

This is the coupe version of the famous Costin Lister (like the MMK08 1/32 scale model). The car, driven by Peter Sargent and Peter Lumsden, blew its Jaguar engine in the fourth hour.

Cast-resin body with cast and etched detail parts, hand-assembled, painted and decaled. Ready to race. Made in France.

This is a KIT—the the photo is an assembled model.

The model is also available ready-to-race.

$109.99 $89.95

Save: 18% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

The first 908 Porsche from NSR is here so you can test drive it yourself if you order yours now.

 

NSR NSR0058SW Porsche 908/3 Spyder Winner Nurburgring 1000 km 1970 #22

NSR 1/32 Analog Corvette C6R Malisped Monza 2008 #37 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Clear Coat Finish over paint & Tampo printing for maximum durability & Gloss – Adjustable suspension motor pod – Includes EVO Chassis that accepts Anglewinder / Inline / Sidewinder Triangular Motor Pods

$96.99

View this Car

The NSR replica of the Porsche 997 LKM that raced at Silverstone in 2009 is here with either anglewinder or sidewinder chassis plus a new Abarth 500 so you can order them now.

 

NSR NSR0055SW Porsche 997 LKM Silverstone 2009 #61

Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Sidewinder Balanced Shark Motor 25,000 RPM & 176 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Clear Coat Finish for maximum durability and high gloss – Includes the EVO Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods

$96.99

View this Car

 

NSR NSR0055AW Porsche 997 LKM Silverstone 2009 #61

NSR 1/32 Analog RTR Porsche 997 LKM Silverstone 2009 #61 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Adjustable front axle ride height – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Clear Coat Finish for maximum durability and high gloss
Includes the EVO Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods

$96.99

View this Car

 

NSR NSR0056SW ABARTH 500 Assetto Corse Trofeo Selenia Mugello 2015 #9

NSR 1/32 Analog RTR – ABARTH 500 Assetto Corse Trofeo Selenia Mugello 2015 #9 – Includes : Lightweight drilled aluminum setscrew wheels all around – All metal setscrew mount super smooth gearing – Heat treated axles – Machined bronze self lubricating bushings – Clear coat over top of Tampo printing for high gloss and durability – Sidewinder balanced Shark Motor 20,000 RPM – Adjustable suspension motor pod – Traction magnet

$96.99

View this Car

We just received the second Carrera replica of the BMW M6 GT3 so you can have one of your own.

 

Carrera 27559 BMW M6 GT3 “Team RLL, No.25″

Carrera 27559 BMW M6 GT3 “Team RLL, No.25″

A car for all-out racing. No racetrack is too tough for the BMW M6 GT3. This car replaced its predecessor in the world of motor racing, the BMW Z4 GT3, in 2016 on the Watkins Glen International circuit in the US state of New York. 585PS/576.99 hp and a V8 engine ensure the car and BMW are equipped to impress the world of motorsport. The car raced for the RLL team with the number 25 and the red, white and blue design reflects the patriotism of the US Americans.

$36.99

View this Car

The latest Sideways by Racer Group 5 Capri looks even lower and meaner in this livery. The car is here now.

 

Racer SW56 Ford Capri Zakspeed Gr.5 DRM Nurburgring Eifelrennen 1982 winner

Ford Capri Zakspeed Gr.5 DRM Nurburgring Eifelrennen 1982 WINNER, driver Klaus Niedzwiedz

$69.99

View this Car

The Sideways limited run of the 2016 Huracans with Gulf colors includes an embroidered Gulf patch in the box to grace your mechanic’s overalls. There are only be a few so order yours now!

 

Racer SWCAR01C Lamborghini Huracan GT3 Gulf Limited Edition

Racer Lamborghini Huracan GT3 Gulf Limited Edition—-Includes an embroidered Gulf patch in the box to grace your mechanic’s overalls.

$79.99

View this Car

The PMTRHR Retro Motor for commercial race tracks is now IRRA Approved

 

Professor Motor PMTRHR Retro High Performance Motor 46,500 RPM

Professor Motor “Retro” High Performance

Motor FK130SH 46,500 RPM

Replaces Falcon 7 51,000 rpm motor

The PMTRHR Retro Motor for commercial race tracks is IRRA Approved

Specifications :

Carbon Motor Brushes

2.0mm Motor Shaft

Extended rear shaft for easier lube / use of “comm cooler”

46,500 RPM @ 12 Volts

270 gm-cm Maximum Torque

Clockwise prefered rotation (looking at can end)

Current Draw 15 Amps @ Stall, 0.65 Amps No Load

NOT compatible with home racing power supplies

$12.95

View this Item

Pre-order

New Cars Coming Soon

The new NSR C6R Corvette is on the way with a choice of either sidewinder or anglewinder chassis so you can pre-order yours now.

 

NSR NSR0057AW Corvette C6R Malisped Monza 2008 #37 —PRE-ORDER NOW!

NSR 1/32 Analog Corvette C6R Malisped Monza 2008 #37 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Clear Coat Finish over paint & Tampo printing for maximum durability & Gloss – Adjustable suspension motor pod – Includes EVO Chassis that accepts Anglewinder / Inline / Sidewinder Triangular Motor Pods

$88.99

View this Car

 

NSR NSR0057SW Corvette C6R Malisped Monza 2008 #37—PRE-ORDER NOW!

NSR 1/32 Analog Corvette C6R Malisped Monza 2008 #37 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – SIDEWINDER Balanced SHARK Motor 25,000 RPM & 176 g-cm Torque – Clear Coat Finish over paint & Tampo printing for maximum durability & Gloss – Adjustable suspension motor pod – Includes EVO Chassis that accepts Anglewinder / Inline / Sidewinder Triangular Motor Pods

$88.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter January 11th, 2018

January 14, 2018 by  
Filed under Newsletter Archive 2018

Comments Off

SUPER SET SALE

This is just one of a dozen different sets we have at special after-Christmas sale prices. Get both the Ford GT and the Corvette C7.R in this “Extreme Power” analog race set from Carrera with over 20-feet of track and an overpass.

 

Carrera 25218 Extreme Power race set

8.2 x 5.8-feet, 20.7-foot lap length
Ford vs. Chevy. This race offers the ultimate adrenaline kick. The latest version of the iconic Ford GT Race Car is fitted with a 3.5-liter, twin-turbo, V6 engine and a giant diffusor. Across the grid there’s the immensely powerful Chevrolet Corvette C7.R with a 5.5-liter, V8 engine. Both of them offer aerodynamics and power incarnate. The challenge is to keep this power under control with icy nerves and precision around the 20.7-foot circuit from the “Extreme Power” Carrera analog set. The numerous bends demand absolute concentration and drifting skills.

$183.99 $146.95

Save: 20% off

View this Set

Sale Items, Great Values

Click Here

There are over 300 bargain-discount cars under the “Sale Items, Great Values” listing, including these two Fly classic Porsches:

 

Fly A521 Porsche 911 GT1 Evo, GrandAm, 2003 (C) (E)

Victory Junction Camp car driven by Gunnar Jeanette, Kyle Petty, and Paul Newman, 2003.

1/32 scale slot car. Ready to run on all 1/32 scale non-digital slot car tracks.

Motor: FC130 endbell drive.

Need more Grip? Try these aftermarket tires! Ortmann 44, Maxxtrac M05X, Supertires 1003, 1004, 1005, 1006

Want a smoother, quieter gear mesh at low cost? The Scalextric W8200 sidewinder pinion gear and W8201 spur gear fit Fly sidewinder cars. These are actually better gears than the stock Fly ones. In many cases they are a very low-cost solution to problems with rough, noisy gear mesh that sometimes occur in Fly sidewinder cars.

$64.99 $49.95

Save: 23% off

View this Car

 

Fly A1605 Porsche Carrera 6 (906), Targa Florio 1966 (C) (E)

WAS $64.99 1/32 scale slot car, ready to run on all 1/32 scale slot car tracks.

1/32 scale slot car. Ready to run on all 1/32 scale non-digital slot car tracks.

Motor: FC130 endbell drive.

Need more grip? Try these aftermarket tires! Ortmann 43, Maxxtrac M4 Super tires 1007

Want a smoother, quieter gear mesh at low cost? The Scalextric W8200 sidewinder pinion gear and W8201 spur gear fit Fly sidewinder cars. These are actually better gears than the stock Fly ones. In many cases they are a very low-cost solution to problems with rough, noisy gear mesh that sometimes occur in Fly sidewinder cars.

$59.95

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

The Lancia Aurelia B20 is one of the prime classic cars, a pioneer in the art of the fastback GT car. Slot Classics has produced the first ever 1/32 scale replica and you can have it as it raced at Le Mans or as the “street” version. They only produce a small number of these hand-made cast-resin models so order yours now.

 

Slot Classic CJ48 Lancia B20 Aurelia, no. 39. 6th overall at Le Mans 1952

Slot Classic CJ48 Lancia B20 Aurelia no. 39.
6th overall at Le Mans 1952 driven by Luigi Valenzano and “Ippocampo”
Custom-made cast-resin body with etched-metal parts. Fully assembled with metal wheels.

$344.99

View this Car

 

Slot Classic CJ48S Lancia B20 Aurelia “street” red

NOTE: Photo is the”racing” Version as part number CJ48—this is the “street” version of the Aurelia B20. No center headlight, “street” driver and no numbers or roundels. Custom-made cast-resin body with etched-metal parts. Fully assembled with metal wheels.

$344.99

View this Car

Three new NSR cars are here. All three are available with either sidewinder or anglewinder pod chassis.

 

NSR NSR0046AW Chevrolet Corvette C7-Z06#57 LMGTE Am LeMans 2016

NSR 1/32 Analog Chevrolet Corvette C7-Z706 #57 LMGTE Johnny O’Connel, Oliver Bryant, Mark Patterson LeMans 2016
Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO 2 Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods

$88.99

View this Car

 

NSR NSR0046SW Chevrolet Corvette C7-Z06#57 LMGTE Am LeMans 2016

NSR 1/32 Analog Chevrolet Corvette C7-Z706 #57 LMGTE Johnny O’Connel, Oliver Bryant, Mark Patterson LeMans 2016 – Adjustable front axle ride height – Drop Arm type Guide Flag with Screw to Allow Fixed Position – Setscrew Aluminum wheels all around – Anglewinder Balanced Shark Motor 25,000 RPM – Adjustable suspension motor pod – Heat treated axles – Machined bronze self lubricating bushings – Ultra smooth and quiet all metal gearing – Adjustable suspension motor pod – Clear Coat Finish for maximum durability and high gloss – Includes the EVO 2 Chassis that will accept Inline / Anglewinder and Sidewinder Triangular motor pods

$88.99

View this Car

 

NSR NSR0048AW ASV (Aston Martin) GT3 Gulf LeMans 2015 #95

Five Aston Martin Vantage GTE cars competed at Le Mans in 2015 and numbers 95 and 96 in Gulf colors are available from NSR.
NSR 1/32 Analog RTR ASV GT3 Gulf 24 Hours of LeMans 2015 #95 – EVO Chassis with adjustable front axle ride height that will accept Inline, Sidewinder or Anglewinder Triangular motor Pods – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Lightweight drilled aluminum setscrew wheels front & back – Ultra smooth and quiet all metal gearing – Heat treated axles with self lubricating bushings – Neodymium traction magnet – Clear coat finish over paint and Tampo printing for maximum durability and high gloss

$88.99

View this Car

 

NSR NSR0048SW ASV (Aston Martin) GT3 Gulf LeMans 2015 #95

Five Aston Martin Vantage GTE cars competed at Le Mans in 2015 and numbers 95 and 96 in Gulf colors are available from NSR.
NSR 1/32 Analog RTR ASV GT3 Gulf 24 Hours of LeMans 2015 #95 – EVO Chassis with adjustable front axle ride height that will accept Inline, Sidewinder or Anglewinder Triangular motor Pods – Anglewinder Balanced Shark Motor 25,000 RPM – Lightweight drilled aluminum setscrew wheels front & back – Ultra smooth and quiet all metal gearing – Heat treated axles with self lubricating bushings – Neodymium traction magnet – Clear coat finish over paint and Tampo printing for maximum durability and high gloss

$88.99

View this Car

 

NSR NSR0049AW ASV (Aston Martin) GT3 Gulf LeMans 2015 #96

Five Aston Martin Vantage GTE cars competed at Le Mans in 2015 and numbers 95 and 96 in Gulf colors are available from NSR. NSR 1/32 Analog RTR ASV GT3 Gulf 24 Hours of LeMans 2015 #96 – EVO Chassis with adjustable front axle ride height that will accept Inline, Sidewinder or Anglewinder Triangular motor Pods – Anglewinder Balanced King Motor 21,400 RPM & 350 g-cm Torque – Lightweight drilled aluminum setscrew wheels front & back – Ultra smooth and quiet all metal gearing – Heat treated axles with self lubricating bushings – Neodymium traction magnet – Clear coat finish over paint and Tampo printing for maximum durability and high gloss

$88.99

View this Car

 

NSR NSR0049SW ASV (Aston Martin) GT3 Gulf LeMans 2015 #96

Five Aston Martin Vantage GTE cars competed at Le Mans in 2015 and numbers 95 and 96 in Gulf colors are available from NSR.
NSR 1/32 Analog RTR ASV GT3 Gulf 24 Hours of LeMans 2015 #96 – EVO Chassis with adjustable front axle ride height that will accept Inline, Sidewinder or Anglewinder Triangular motor Pods – Anglewinder Balanced Shark Motor 25,000 RPM – Lightweight drilled aluminum setscrew wheels front & back – Ultra smooth and quiet all metal gearing – Heat treated axles with self lubricating bushings – Neodymium traction magnet – Clear coat finish over paint and Tampo printing for maximum durability and high gloss

$88.99

View this Car

Pre-order

New Cars Coming Soon

Slot.it has announced replicas of two of the most colorful race cars for shipment in mid-2018. You can pre-order yours now.

 

Slot It SICA36C Opel Calibra no 2, “Old Spice” Avus Ring, DTM/ITC 1995—PRE-ORDER NOW!

SICA36C Opel Calibra no 2, “Old Spice” Avus Ring, DTM/ITC 1995, driver Keke Rosberg

$59.99

View this Car

 

Slot It SICA08F Lancia LC2, no. 6, “Martini Hasseroder” Brands Hatch 1984—PRE-ORDER NOW!

SICA08F Lancia LC2, no. 6, “Martini Hasseroder” Brands Hatch 1984, drivers P.Martini, P. Barilla and Bob Wollek

$59.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter January 4th, 2018

Comments Off

The best set from Scalextric is sold out but we found one so you can race it yourself. This set has FOUR cars, an operating pit stop lane, full race program App and digital lane changers to race up to four cars at once (with a push-button option to run two analog cars).

Scalextric C1374 ARC Pro Platinum Digital Set

Scalextric C1374 ARC Pro Platinum Digital Set with Four (4) cars, active pit lane, two double lane-changers, lap counting, timing and race management with an app on your Smart Devise and with wireless controllers.

The ultimate racing experience Scalextric App Race Control (ARC)… the first slot car race control system that allows users to wirelessly create and manage races through the use of a handheld smart device. Using Scalextric’s revolutionary new ARC powerbase in conjunction with this app, users can seamlessly merge the excitement of real time, on-track racing, with the thrill of on-screen gameplay.

Contents

  • 2 x 15v transformers (US)
  • 1 x Smart device cradle
  • 4 x Wireless controllers
  • 1 x Scalextric ARC PRO powerbase
  • 1 x Mercedes AMG GT3
  • 1 x BMW Z4 GT3
  • 1 x Aston Martin Vantage GT3
  • 1 x Porsche 911 RSR
  • 1 x Scalextric track (length 918cm/30′ 1″)

The Powerbase can be used in Analog or Digital power modes. This great feature allows the Powerbase to be used with standard 2-lane Scalextric circuits, using two cars only, or with Scalextric Digital layouts for 1-to-6 car action. Most features (except lane-changing actions) are available in either mode.

$689.99

View this Set

EDSET-37 Trans-Am Twinpack A: We have bundled two of the most desirable Scalextric Trans-Am Camaros into a twin-pack with a special low price. Limit one set to a customer. No Dealers.

EDSET-37 Trans-Am Twinpack A: Scalextric C2896 & C3065 1970 Trans-Am Camaros

•Scalextric C2896 1970 Camaro Trans-Am, Jim Hall / Vic Elford

This car was driven first by Jim Hall and later by Vic Elford. Elford drove it to victory in the 1970 Watkins Glen TransAm, Chevrolet’s only victory that year.

•Scalextric C3065 1970 Camaro, RR Racing

This car raced in the TransAm and other events in the early 1970s and is still active in vintage racing. However, the model represents the car as it looked when it was owned by a wealthy Texan named Richard Rainwater (hence, RR Racing)

Two of the Trans-Am Camaros from the peak 1970 racing season are ‘bundled” into this special Twinpack. Both cars are “DPR” ready to enable quick-changeover to Scalextric Digital with the C8515 Digital Plug (not included).

$69.95

View this Set

Pre-order

New Cars Coming Soon

Four exciting cars from Scalextric are coming next week so you can pre-order yours now.

Scalextric C3841 Ford Daytona Prototype no. 60 ‘Aero’ —PRE-ORDER NOW!

Scalextric C3841 2014 Ford Daytona Prototype ‘Aero’, Michael Shank Racing No.60, IMSA, Circuit of the Americas, Austin,Texas, drivers Ozz Negri and John Pew

$49.99

View this Car

Scalextric C3856 Aston Martin GT3 Tony Quinn Clipsal 500, 2013—PRE-ORDER NOW!

Scalextric C3856 Aston Martin GT3 Tony Quinn Clipsal 500, 2013

The 84th 24 Hours of Le Mans was held from 15 to 19 June 2016 at the Circuit de la Sarthe, Le Mans, France. It was the 84th running of the 24 Hour race organised by the Automobile Club de l’Ouest as well as the third round of the 2016 FIA World Endurance Championship. The Audi R18 of Loïc Duval, Lucas di Grassi & Oliver Jarvis Qualified in 6th spot. After a hugely eventful and weather affected race they finished in 3rd position.

$49.99

View this Car

Scalextric C3890 Jaguar E Type 1965 Bathurst Bob Jane—PRE-ORDER NOW!

Scalextric C3890 Jaguar E Type 1965 Bathurst Bob Jane

Illustration to be relased later in 2017

$49.99

View this Car

Scalextric C3894A Lancia Stratos 1976 Rally Champions Twinpack – Limited Edition—PRE-ORDER NOW!

Scalextric C3894A Lancia Stratos 1976 Rally Champions Twinpack – Limited Edition

The Lancia Stratos won the World Rally Championship in 1974, 1975 and 1976. The Scalextric C3894A twinpack includes two of the winning cars from the 1976 championship; Sandro Munari and Silvio Maiga’s Monte Carlo winner and Bjorn Waldegard and Hans Thorszelios’ San Remo (Italy) winner.

$104.99

View this Car

Scalextric has produced their 1/32 scale models of the new McLaren 720S supercar and they are on the way here so you can pre-order yours and have one of the first.

Scalextric C3895 McLaren 720S Azores Orange—PRE-ORDER NOW!

Please note – images featured are a hand decorated pre-production prototype

Continuing Scalextric’s long running relationship with McLaren is this exciting new addition to the Scalextric range – unveiled at the Geneva International Motor Show on March 7th 2017, the McLaren 720S is the latest supercar to come from the famous Woking manufacturer and boasts a dazzling array of features and some superb performance figures.

Its 4 litre twin turbo V8 propels the car to 60 mph in just 2.8 seconds, easily backing up the car’s beautiful and striking looks with performance to match. The car, both in 1/32 scale and on the road is a real performer, weighing less than its predecessor. The real car boasts incredible grip and road holding thanks to its Pirelli P Zero Corsa tyres and new active chassis control system – the perfect stablemate to the McLaren P1™ or 12C Coupe in your garage!

$49.99

View this Car

Scalextric C3982 McLaren 720S Glacier White—PRE-ORDER NOW!

Please note – images featured are a hand decorated pre-production prototype

Continuing Scalextric’s long running relationship with McLaren is this exciting new addition to the Scalextric range – unveiled at the Geneva International Motor Show on March 7th 2017, the McLaren 720S is the latest supercar to come from the famous Woking manufacturer and boasts a dazzling array of features and some superb performance figures.

Its 4 litre twin turbo V8 propels the car to 60 mph in just 2.8 seconds, easily backing up the car’s beautiful and striking looks with performance to match. The car, both in 1/32 scale and on the road is a real performer, weighing less than its predecessor. The real car boasts incredible grip and road holding thanks to its Pirelli P Zero Corsa tyres and new active chassis control system – the perfect stablemate to the McLaren P1™ or 12C Coupe in your garage!

$49.99

View this Car

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter December 28th, 2017

January 2, 2018 by  
Filed under Newsletter Archive 2017

Comments Off

This is the set that more of our customers prefer than any other. They are no longer being produced but we have a few in stock at a special low price.

 

Scalextric C1319T Continental Sports Cars (C)

The perfect introduction to the exciting world of 1:32 scale slot racing. The LMP and Pro GT cars are tough enough for full impact racing. Build four different layouts with the track supplied. This set includes a lap counter for even more excitement.

Each hand controller has a two-position selector switch which allows the driver to choose slow or fast speed settings to reflect the driver’s experience. A sheet of decals is supplied with each car so that the car can be decorated with racing graphics.

$124.99 $99.95

Save: 20% off

View this Set

Upgrade the Scalextric C1319T Continental Sports Cars set (above) or bring your own Scalextric track up to Digital with this C7042DC Upgrade Package. This incredible Powerbase allows you to race either Scalextric Digital or, by just pressing a button (and taping the lane changer flaps shut), to race two of any brand of analog car. The C7042DC “package” includes everything to upgrade your track—the Digital Plugs to convert the cars must be purchased separately. Save $80.00 on this package deal.

 

Scalextric C7042DC Digital 6-car conversion package

An ‘open-source’ output connection enables the enthusiast to connect the six car power base to a computer for additional functionality.

This new Powerbase can be used in Analogue or Digital power modes. This great feature allows the Powerbase to be used with standard 2-lane Scalextric circuits, using two cars only, or with Scalextric Digital layouts for 1-to-6 car action. All features are available in either mode.

Now the best of both worlds is offered – an all-in-one race control system for Analogue and Digital racing.

Requires the 15V Power Supply sold separately (P9303) and two Scalextric Digital throttles (C7002)—also sold separately). You will also want one or more C7036 Lane Changers. If you upgrading an existing Scalextric Digital track you will need the C7042 and the P9303 Power Supply but you can use your Scalextric Digital throttles (analog throttles will not operate the system).

NOTE: If you want a complete Scalextric Digital track conversion you can purchase the C7042DC (note the “DC” on the part number and the special price) Package that includes the C7042, P9303 Power Supply, two C7002 throttles, PLUS one C7036 Lane Changer.

The Digital Plugs to convert the cars must also be purchased separately—each car will require its own plug. Most Scalextric cars are Digital Plug Ready so a number C8515 Easyfit Digital Plug (for most cars) or C8516 Easyfit Digital Plug (for Scalextric Formula 1 cars) is a one-screw unplug/plug-in installation. For other brands the C7005 Digital Chip can be installed but the wire connections must be soldered. All three Digital Plugs (chips) also allow the car run on any brand of analog track (but not on other brands of digital).

$279.99 $199.95

Save: 29% off

View this Set

Add this GT40 with Le Mans history to your racing stable at a dirt-low price.

 

Scalextric C3533 Ford GT40 LeMans 1966

1/32 scale slot car, ready to run on all 1/32 and 1/24 scale non-digital tracks.

Race – Le Mans 24hr June 1966

Drivers – Innes Ireland and Jochen Rindt

This car features the updated Ford GT40 chassis which is Digital Plug Ready (DPR)

Special Features

  • Digital Plug Ready
  • Easy Change Pick-ups
  • Magnatraction
  • Working Headlights
  • Xenon Effect Headlights
  • High Detail

$54.99 $39.95

Save: 27% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

The March 701 Formula 1 car was most dramatic in the bright blue color on Jackie Stewart’s car and we have the Policar replica with the same chassis design that makes their Lotus 72 so quick. Order yours now.

 

PCAR04B March 701 Jackie Stewart

March 701 Jackie Stewart, Jarama GP 1970, first place.

$64.99

View this Car

The Autocoast T122 was one of the few cars to challenge the McLarens in the 1969 Can-Am and the first 1/32 scale model of car is here now.

 

CG-3RTR Autocoast Ti22 Can-Am Laguna Seca 1969, 13th , driver Jackie Oliver

3D-printed body and chassis with separate sidewinder pod and adjustable front axle ride height. Assembled, painted and detailed. Ready-to-race.

$129.99

View this Car

Two new Mr. Slotcar McLarens with their most colorful liveries are here so you can order yours now.

 

MRSLOTCAR MR1047 McLaren F1 GTR Fina Livery LeMans 1996, 8th

MRSLOTCAR MR1047 McLaren F1 GTR Fina Livery LeMans 1996.

MRSLOTCAR 1/32 Analog RTR McLaren F1 GTR Fina Livery LeMans 1996 – Setscrew Aluminum Wheels all 4 corners – Independent front axle suspension feature MR8025 (optional at extra cost) – Tunable spring suspension motor pod (springs available separately) – NEWLY DESIGNED Anglewinder 21,500 RPM LONG CAN high torque balanced motor – brass pinion drivetrain – Setscrew Plastic axle gear – Screw mount guide system – Adjustable front axle/wheel ride height – Machined bronze axle bushings – 3/32″ (2.37mm) hardened axles – Traction magnet – Press fit rear wing and rear view mirror mounting systems – OPTIONAL front suspension setup shown in illustrations

$77.99

View this Car

 

MRSLOTCAR MR1048 McLaren F1 GTR Harrods Livery LeMans 1995, third

MRSLOTCAR 1/32 Analog RTR McLaren F1 GTR Harrods Livery LeMans 1996 – Setscrew Aluminum Wheels all 4 corners – Independent front axle suspension feature MR8025 (optional at extra cost) – Tunable spring suspension motor pod (springs available separately) – NEWLY DESIGNED Anglewinder 21,500 RPM LONG CAN high torque balanced motor – brass pinion drivetrain – Setscrew Plastic axle gear – Screw mount guide system – Adjustable front axle/wheel ride height – Machined bronze axle bushings – 3/32″ (2.37mm) hardened axles – Traction magnet – Press fit rear wing and rear view mirror mounting systems – OPTIONAL front suspension setup shown in illustrations

$77.99

View this Car

Pre-order

New Cars Coming Soon

The Slot.it Alfa Romeo 155 with a new body to match the 1996 cars is due early next year so you can pre-order yours.

 

Slot It SICA45a Alfa Romeo 155 Ti – #19 – Silverstone – ITC 1996 Classic DTM—PRE-ORDER NOW!

Slot It SICA45a Alfa Romeo 155 Ti – #19 – Silverstone – ITC 1996 Classic DTM, driver Jason Watt.

New body to match the 1996 full-size Alfa Romeos.

$59.99

View this Car

It’s often the little things that make the difference. Loose body screws are a common “Speed Tweak” but the body rattle sets up its own wheel-hop-increasing factor. Dampen those vibes with these silicone washers.

 

PMTR7024 Professor Motor Silicone Insulating Washers x 10—PRE-ORDER NOW!

Professor Motor Soft Silicone Insulating Washers for Body to Chassis Isolation – 10 Washers / Package – 1.5mm thick – Usable with most cars in the body to chassis interface and / or the motor pod to chassis interface areas. The unique characteristics of this material allow it to repeatedly compress and expand without taking a permanent set for maximum durability.

$3.99

View this Item

Click Here to See All of this Week’s New Arrivals

Thanks for shopping with us!

The Electric Dream Team

www.electricdreams.com

Warehouse phone: (310) 676-7600

Slot car technical information and help email:

support@electricdreams.com

Our warehouse is open to walk-in customers Monday through Friday 9 am to 4 pm.

Next time you’re in the greater Los Angeles area stop by and see us.

606 Hawaii Street, Unit B

El Segundo, CA 90245

We’re just minutes from LAX.

Share
Tweet
+1
Forward to Friend

Newsletter December 21st, 2017

December 25, 2017 by  
Filed under Newsletter Archive 2017

Comments Off

The post-Christmas sale on slot car sets is on right now!

You deserve a complete racetrack set and we have these available at super-low after-Christmas prices but only for 10 days. No dealers.

Carrera 25197 Celebracers race set (C)

1/32 scale slot car race set. Complete race set-everything you need to begin racing is in the box.

Carrera says this red Porsche 904 will be available only in this race set.

$189.99 $151.99

Save: 20% off

View this Set

Carrera 25219 Race Champs Race Set

Carrera 25219 Race Champs Race Set

7.1 x 4.6-feet, 17.4-foot lap length

Carrera EVOLUTION’s “Race Champs” analog set allows two big winners to show just what they are capable of: Lewis Hamilton, reigning Formula 1 World Champion in the Mercedes F1 W05 Hybrid, and Sebastian Vettel in the Ferrari SF 15-T. The Silver Arrow and the Scuderia Ferrari are both powered by a 1.6-litre, turbocharged V6 engine for tough neck-and-neck racing between the two world champions around the 17.4-foot Carrera racing circuit with two loops!

$164.99 $129.95

Save: 21% off

View this Set

Carrera 30195 Passion of Speed set DIGITAL 132

Carrera 30195 Passion of Speed set

4.0-foot lap length, 10.0 x 5.6-foot area

Screaming powerhouses

The Carrera DIGITAL 132 ‘Passion of Speed’ set pits two genuine powerhouses against each other in the Ferrari 488 GT3 SF Corse No. 68 and the Porsche GT3 RSR ‘Manthey Racing’ No. 911. The 550PS/542.47 hp Ferrari 488 GT3 impresses with a Biturbo-V8 engine that does the Italian brand name proud. The racing rival is the Porsche GT3 RSR with a 6-cylinder boxer engine with 4-valve technology, and which was already on the start in 2016 for the 24h-race at the Nürburgring circuit. The Carrera racetrack is around 7.3-metre/23.95 ft. long to allow both cars to unfold every last horse of their power for some great overtaking actions. Who’ll be crossing the line first?

$366.99 $316.95

Save: 14% off

View this Set

Carrera 30197 ’80 Flashback D132 set (Group 5 Capri and M1)

The fatest cars from the eighties, Group 5 BMW vs. Zaxspeed Capri on a 26-foot course with two lane-changer tracks.

5.1 x 9.8-foot area, 26.9-foot lap length

One double-lane change track section PLUS one curved single lane-change track section.

The set with cult status

The tracks start to vibrate when these racers hit the circuit. Mario Andretti’s BMW M1 Procar and the Ford Capri Zakspeed Turbo run by the Würth-Kraus-Zakspeed team use the whole bendy 8.2-metre/26.9 ft. Carrera racing circuit to show what they’re capable of. Risky overtaking manoeuvres, lane changes and drifts push the drivers to the limits of their concentration. 2.4 GHz WIRELESS+ Technology and a wireless, ultra-light handset guarantee complete freedom of movement for drivers. These faithfully reproduced classics should be a part of every Carrera collection!

$479.99 $429.95

Save: 10% off

View this Set

A rare chance to get a deal on a Dodge Charger Muscle car. No dealers. One to a customer.

Scalextric C3535 Dodge Charger, blue road car.

1/32 scale slot car. Ready to run on all 1/32 scale non-digital slot car tracks. Digital plug ready. Accepts C8515 plug-in digital chip.

54.99 $45.95

Save: 16% off

View this Car

New This Week

Want to see what’s new? Just keep reading…

Keep reading – or if you would rather just cut to the chase and see all our new products, click here to go to the shop.

The first ready-to-race Huracan from Sideways is here now with a new chassis and super performance.

Racer SWCAR01A Lamborghini Huracan GT3, no. 63, 2016 British GT Championship, Spa

Racer Lamborghini Huracan GT3, no. 63, 2016 British GT Championship, Spa-Francorchamps, driver Hunter Abbott and Rolf Ineichen

$72.99

View this Car

The Sideways Kremer Porsche 935 with the high-performance chassis has arrived.

Racer SW55 Kremer 935K2 Team Willeme-Marlboro Cup – Zolder 1978 — ‘Roneo Vicers’

Racer (Sideways) Kremer 935K2 – Team Willeme – Marlboro Cup – Zolder 1978 — ‘Roneo Vicers’, driver C.Bourgoignie

$64.99

View this Car