Universal Chassis, All Mfrs.
This is a complete car less body, ready to run and ready for you to mount the static kit or resin body of your choice to make you own unique car quickly and easily at low cost. This... more info
$37.99
This steel chassis kit is made to fit many open-wheel 50s and 60s slot car bodies, including F1, F5000, and Indy cars. Accepts Falcon and similar motors. Some of the smaller, narrower bodies will not... more info
$32.95
This laser-cut steel chassis uses a slimline (FF) motor and will fit under most 1/32 scale 50s-60s open-wheel slot car bodies, such as F1, F5000, and Indy cars. Comes in kit form, soldering... more info
$49.95
Due to popular demand, especially in the U.K. Beardog Racing and AB Slotsport have developed a new variation on their famous Indy/F-1 chassis. The original Indy chassis was sized for 96"... more info
$42.99
***Does not come with wheel inserts *** Complete car less body. add the body of your choice and you have a raceworthy car on an aluminum chassis with Slot It components. This is the... more info
$94.99
H&R Racing 1/24 "Hardbody" Bare chassis kit - Wheelbase 3 5/8" to 4 7/8" (92mm to 123mm). - Set up inline. more info
$22.59
H&R Racing Products Adjustable Wheelbase 1/24 RTR assembled Rolling Chassis - Wheelbase adjustable from 3 5/8" to 4 7/8" (92mm to 123mm) - Includes new 40,000 RPM Motor with larger... more info
$47.95
H&R Racing Products Adjustable Wheelbase 1/24 RTR assembled Rolling Chassis - Wheelbase adjustable from 3 5/8" to 4 7/8" (92mm to 123mm) - Includes new 40,000 RPM Motor with larger... more info
$49.95
H&R Racing Products Adjustable Wheelbase 1/24 RTR assembled Rolling Chassis - Wheelbase adjustable from 3 5/8" to 4 7/8" (92mm to 123mm) - Includes new 40,000 RPM Motor with larger... more info
$47.95
H&R Racing Products Adjustable Wheelbase 1/24 RTR assembled Rolling Chassis - Wheelbase adjustable from 3 5/8" to 4 7/8" (92mm to 123mm) - Includes 26,000 RPM small can Cobra motor,... more info
$49.95
H&R Racing Products Adjustable Wheelbase 1/24 RTR assembled Rolling Chassis - Wheelbase adjustable from 3 5/8" to 4 7/8" (92mm to 123mm) - Includes Hawk 18,000RPM Motor, narrow FOAM... more info
$47.95
H&R Racing Products Adjustable Wheelbase 1/24 RTR assembled Rolling Chassis - Wheelbase adjustable from 3 5/8" to 4 7/8" (92mm to 123mm) - Includes 26,000 RPM small can Cobra motor,... more info
$46.99
H&R Racing Products Adjustable Wheelbase 1/24 RTR assembled Rolling Chassis - Wheelbase adjustable from 3 5/8" to 4 7/8" (92mm to 123mm) - Includes Hawk 18,000RPM Motor, narrow Soft... more info
$47.95
H&R Racing Products Adjustable Wheelbase 1/24 RTR assembled Rolling Chassis - Wheelbase adjustable from 3 5/8" to 4 7/8" (92mm to 123mm) - Includes 18,000 RPM small can Hawk motor, WIDE... more info
$49.99
This kit builds up into a complete running chassis that fits any of the Ostorero Watson Roadster bodies. It also can be adapted for use with many other bodies requiring a narrow chassis and a... more info
$76.99
Complete running chassis that fits any of the Ostorero Maserati 8CTF bodies. It also can be adapted for use with many other bodies requiring a narrow chassis and a front motor... more info
$86.99
This chassis fits any of the Ostorero Lotus 38 bodies. It can also be adapted for use with many early mid-engined F1 or Indy Car bodies that require a narrow chassis and a rear motor location. more info
$37.99
Assembled chassis without motor, lead wires, guide, and gears. Note that there is room in the design to run much wider rear tires than what it comes with. Wheelbase is adjustable from mm 78.5... more info
$54.99
1/32 Scale Universal Inline Chassis kit Includes: Chassis front Guide section Chassis Main Frame 3 Pairs front axle spacers 2 Plastic locking Nuts 1 Self Taping Screw 1 TSRF Guide Flag. Dimensions:... more info
$15.95
Out of Stock
Professor Motor Reproduction AMT Chassis for 1/24 or 1/25 Scale Hard Plastic or Lexan Bodies - Complete Kit Less Motor & Pinion Contents : PMTR5007 Reproduction AMT Chassis Kit - Brass long... more info
$47.99
Professor Motor Reproduction AMT Chassis for 1/24 or 1/25 Hard Plastic or Lexan Bodies - Brass - long wheelbase version with 1/4" longer wheelbase then original AMT. Includes stainless steel... more info
$29.99
Laser-cut steel parts require soldering to assemble. This chassis can be adapted for use with many different 1/32 scale bodies. Front-motor chassis design requires a drive-shaft assembly... more info
$29.99
Polyamide adjustable frame with guide, bushings, spacers, and 4 Screws. Excellent chassis for 1/43 scale cars and many smaller 1/32 scale cars. Minimum rear wheel diameter: 15mm... more info
$32.49
